Medium voltage switchgear in the UAE is the 11 kV (and up to 33 kV) switching and protection equipment, air insulated, gas insulated or packaged as ring main units, that connects buildings and plants to the utility network. This page lists UAE suppliers and explains IEC 62271-200 service continuity, partition and internal arc classes, the SF6 question, Gulf derating and DEWA, TAQA Distribution and owner acceptance.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified medium voltage switchgear suppliers who quote for your order directly.
Tell us about medium voltage switchgear in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Medium voltage switchgear is the metal-enclosed equipment that switches and protects circuits between 1 kV and 52 kV, using vacuum or gas circuit breakers, load break switches, fuses, earthing switches and protection relays. In the UAE most of it works at 11 kV, the voltage at which DEWA's 132/11 kV substations hand power to the distribution network. It is part of switchgear and panels in the UAE, and it is the piece of the electrical system most closely controlled by the utility.
Dubai alone had 340 transmission substations at 132 kV by the end of April 2023, according to the Dubai Media Office, each feeding an 11 kV network that ends in ring main units and customer switchgear in towers, malls, plants and data centres.
| Type | Where UAE projects use it | Key specification points |
|---|---|---|
| Air insulated switchgear (AIS) with withdrawable vacuum breakers | Industrial plants, district cooling, airports, private 11 kV networks | Rated voltage, busbar current, short-time current, LSC2B with PM partitions, IAC class |
| Gas insulated switchgear (GIS) | Space-limited substations, dusty or coastal sites, data centres | Insulating gas (SF6 or an alternative), sealed-for-life tank, cable connection type |
| Ring main units (RMU) | Utility secondary substations and package substations feeding building transformers | Switch and breaker functions, remote control for the utility, utility-approved model |
| Metering and intake panels | Customer intake where the utility meters an MV supply | Utility metering CTs and VTs, sealing, approved layout |
Downstream, MV switchgear feeds 11 kV/400 V distribution transformers and through them the main LV switchboards. Large MV motors for chillers and pumps can also be fed from MV motor control lineups with vacuum contactors.
IEC 62271-200 classifies MV switchgear by how much of it stays in service during maintenance (LSC), what the partitions are made of (PM or PI) and how it behaves in an internal arc (IAC). Specify all three, because two offers with the same voltage and current can differ completely here.
Schneider Electric explains that the LSC category describes which other compartments or functional units can stay energised when a compartment holding a main circuit is opened. Siemens' tender text for its NXAIR air insulated switchgear shows how this works in practice: LSC2B where busbar, switching device and connection compartments are separated by metallic partitions, LSC2 for switch-disconnector panels with HV fuses, and LSC1 for busbar connection panels. For a UAE hospital or data centre that must keep feeding other circuits while one cable is worked on, LSC2B is the usual requirement.
PM means metallic partitions connected to earth; PI means partitions or shutters of insulating material. The same Siemens text uses PM generally and PI only for the insulating shutter in fused switch-disconnector panels. Ask which class applies to each panel type in the lineup, not only to the circuit breaker panels.
In the Siemens specification, wall-standing lineups are classed IAC A FL and free-standing lineups IAC A FLR, since the rear is only exposed when people can walk behind the switchgear. Schneider Electric's IEC 62271-200 note explains that A restricts access to authorised staff and F, L and R are the front, lateral and rear sides tested. Make sure the switchroom layout matches the class bought, and that arc gases are ducted out of the room where the maker's design needs it.
SF6 gas insulated switchgear and RMUs remain available in the UAE, but the supply side is changing because of European rules. Under Regulation (EU) 2024/573, as summarised by ESB Networks, switchgear that relies on fluorinated gases may not be put into operation in the EU from 1 January 2026 up to 24 kV and from 1 January 2030 above 24 kV up to 52 kV. The EU rule does not apply in the UAE, but European makers are moving their MV product lines to vacuum, dry air and other alternatives. When you buy GIS or RMUs, ask whether an SF6-free version of the same design exists, how gas is recovered at end of life, and whether spares and service will stay available for the life of the asset.
MV switchgear ratings are referred to a standard ambient, so outdoor package substations and hot switchrooms need the maker's derating for the real ambient and solar gain. Condensation is the bigger risk on the coast: specify thermostatic anti-condensation heaters, sealed cable entries and cable boxes suited to the cables used.
As of 2026, MV switchgear in the UAE is bought to the IEC 62271 series and then accepted by the utility of the emirate or by the plant owner, with the consultant checking the type test evidence.
| Requirement | Applies to | Authority or evidence |
|---|---|---|
| IEC 62271-200 type tests, LSC, partition and IAC class | Metal-enclosed AIS, GIS and RMUs from 1 kV to 52 kV | Type test certificates from an accredited laboratory |
| IEC 62271-100 | MV circuit breakers inside the switchgear | Manufacturer type tests |
| Utility acceptance of makes and models | RMUs, intake and metering switchgear the utility operates or connects | DEWA, TAQA Distribution, SEWA or Etihad Water and Electricity |
| Owner vendor approval | Switchgear for ADNOC and other operator plants | Owner specifications and approved lists |
| Factory acceptance test | Each lineup before shipping | Witnessed by consultant or owner |
Utility-approved RMU models are fixed by each utility, so a design that suits a private plant network may not be accepted at a DEWA or TAQA Distribution interface. Get the current approved list before tendering.
MV switchgear in the UAE is mostly factory-built by international makers and supplied through their UAE offices or authorised partners, because type tests and IAC ratings belong to a specific factory design.
Compare the protection relays, CT and VT ratings and interlocking in each offer, not only the switchgear frame. Coordinate with the 11 kV power cables and terminations, the substation building or package unit and the current transformers for protection and metering.
The number of panels, the short-circuit rating, the insulation technology and the protection scheme drive price; the factory slot and utility approval drive delivery.
Utility RMUs from regional factories can be quicker than custom primary switchgear built in Europe or Asia. For comparable quotes, post your MV switchgear requirement with the single line diagram, fault level, LSC and IAC classes and the utility or owner approvals needed.
Where LV ends and MV begins, how GIS and AIS differ in size, cost and maintenance, what SF6 rules mean for Gulf buyers, how ring main units work and how to read an MV datasheet.
Which switchgear and panel brands Gulf projects specify, what IEC 61439 design verification and forms of separation mean, how heat affects ratings, and the UAE and Saudi rules.