Copper pipes and tubes in the UAE are seamless drawn copper tube, supplied in coils or straight lengths, for air conditioning refrigerant lines, potable water, heating, gas and medical gas. This page explains the standards and tempers UAE specifications quote, how to size and order tube, how to store and braze it in hot, humid conditions, and where to source it.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified copper pipes & tubes suppliers who quote for your order directly.
Tell us about copper pipes & tubes in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Copper tube is seamless drawn copper made to a standard that fixes outside diameter, wall thickness, composition and temper. It is the main product of copper products in the UAE for building services, and it pairs with the fittings covered on the companion page, copper pipes and fittings, which looks at joints and plumbing systems rather than the tube itself.
| Standard | Covers | Size range and form |
|---|---|---|
| EN 12735-1:2020 | Seamless round copper tube for air conditioning and refrigeration piping | 3 to 219 mm outside diameter; Cu-DHP in hard or half-hard straight lengths or annealed coils; CuFe2P in straight lengths only |
| EN 1057 (GSO EN 1057) | Seamless round copper tube for water and gas in sanitary and heating applications | 6 to 267 mm outside diameter |
| ASTM B280 | Seamless copper tube for AC and refrigeration field service | Coils and straights |
| Type K, L and M tube | US-style water tube, often named in American-specified projects | Wall thickness rises from M to L to K |
The Swedish standards body describes SS-EN 12735-1:2020 as valid and covering tubes from 3 to 219 mm for refrigeration and air conditioning piping, connections and repairs. The Gulf Standards store lists GSO EN 1057 as a current Gulf Standard for water and gas tube, covering hot and cold water, heating, domestic gas and waste water sanitation. ASTM B280 is the matching US standard.
A tube is not a pipe in copper trade terms: tube is sized by actual outside diameter, which is why copper tube cannot be threaded like steel pipe. For steel and plastic alternatives see pipes and fittings, PPR pipes and fittings and PVC pipes and fittings.
Order annealed coil for small-bore runs that must bend around obstacles, and hard-drawn straight lengths for larger or exposed pipework that must stay straight and take supports. The choice follows the standard: EN 12735-1 allows Cu-DHP in annealed coils, while CuFe2P is supplied only in straight lengths.
Straight tube suits the plant side of HVAC and district cooling, while coil is typical of VRF and VRV systems. Gas distribution to wards and labs falls under medical gas systems.
Heat and humidity do not harm copper tube itself, but they punish poor handling: dust and moisture inside tube cause brazing faults, and condensation on uninsulated cold lines soaks ceilings and structures. Cleanliness at delivery and insulation on site matter more than wall thickness.
Copper tube is one of five copper product lines. Power distribution uses copper bus bars, flat fabrication uses copper sheets and strips, and machined valve and fitting bodies are usually brass products. Keep these separate in an enquiry so each supplier quotes the right material, and do not assume a tube stockist also holds bar or strip.
Joints decide whether tube stays leak-free. Brazed joints with the right filler suit refrigerant and high-pressure lines, soft-soldered capillary joints suit potable water within their pressure limit, and press fittings speed up site work if the tube is clean, round and cut square. Whatever method you use, specify the fitting standard together with the tube, and cut tube ends square and deburr them before assembly.
Copper tube is bought to the standards above and to the approvals of the authority or client for the project, rather than to a single UAE tube certificate. Checked as of 2026, confirm these items with the party that approves the project.
| Requirement | Applies to | Authority |
|---|---|---|
| Product standard (EN 1057, EN 12735-1 or ASTM) | Tube in the contract specification | Project consultant; standards bodies |
| Municipality or utility material approval | Tube in potable water and plumbing systems | The emirate's water authority or municipality |
| Dubai Civil Defence or equivalent | Tube used in fire-related or medical gas work | Civil defence authority |
| ECAS or EQM | Regulated finished products, where applicable | MoIAT |
Read the ECAS and EQM guide and the Civil Defence approval guide for the schemes, and ask the project consultant which approvals name your tube.
UAE supply comes from tube makers and their agents, HVAC and plumbing stockists in Dubai, Sharjah and Abu Dhabi, and traders importing coil and straights through Jebel Ali. Makers whose copper tube is listed here include KME, Wieland, Mueller, Cupori, ElvalHalcor, Mettube, Mehta Tubes, Golden Dragon and Maksal.
The sourcing guide covers supplier checks, and you can post your requirement with standard, outside diameter, wall, temper and quantity.
Price follows the copper market plus conversion for diameter, wall, temper, insulation and coating. Lead time is short for common ACR coil and water tube sizes held in stock, longer for large diameters and special walls.