Brass products in the UAE are copper-zinc alloy rod, bar, sections, sheet, strip, fittings and valves used for plumbing, electrical connectors, machined parts and architectural hardware. This page explains the main brass grades, the EN standards UAE specifications quote, what to check for water service and coastal air, and how to source brass from UAE stockists, fabricators and brands.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified brass products suppliers who quote for your order directly.
Tell us about brass products in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Brass is an alloy of copper and zinc, and brass products are the bar, rod, sections, sheet, strip, castings, fittings and valves made from it. It belongs to copper products in the UAE and is bought by plumbing contractors, valve and pump makers, electrical panel builders and machine shops.
| Type | Typical UAE use | Why it is chosen |
|---|---|---|
| Free-machining brass bar (CuZn39Pb3, CW614N or CZ121) | Turned parts, cable glands, connectors, valve stems, nuts and bolts | Highest machinability of any copper alloy because of about 3% lead |
| Cold-forming brass (CuZn37, CW508L) | Pressed, drawn and bent parts, strip and sheet | Good ductility for forming; machines slowly |
| Dezincification-resistant brass | Water fittings, valves and meters | Resists zinc loss in aggressive water |
| Brass sheet and strip | Terminals, contacts, decorative panels | Conductive, bright, formable |
| Brass fittings and valves | Compression fittings, ball and check valves, taps | Standard parts in building services |
| Cast brass | Valve bodies, taps, ornamental castings | Complex shapes from sand or gravity casting |
The data for free-machining bar comes from a supplier datasheet summarised by Righton Blackburns, which describes CZ121 as a free-machining brass with about 3% lead acting as a chip breaker and the highest machinability of any copper alloy, used for high-speed machined components, locks, hinges, nuts, bolts and bushings. Its sibling product lines are bronze products for bearings and marine parts, copper pipes and tubes for services, and copper sheets and strips for flat rolled work.
Choose the grade from the manufacturing method and the fluid: free-machining leaded brass for turned parts, cold-forming brass for pressing and bending, and dezincification-resistant brass for hot or aggressive water. Using a free-machining grade for a part that will be cold formed leads to cracking, and using the wrong grade in water leads to slow failure.
Machined brass parts are usually finished at CNC machining services or bought as part of a wider metal fabrication package. Brass valves are covered in ball valves, check valves and gate valves.
Brass tarnishes quickly in hot, humid and salt-laden air, and zinc can leach out of the wrong brass in some waters. For visible parts, the colour change is a finish issue; for water parts, it is a service life issue.
Brass is bought to EN, ASTM or ISO product standards named in the specification, with approvals attached to the finished plumbing, electrical or valve product. Checked as of 2026, these are the common references.
| Standard or approval | Applies to | Authority |
|---|---|---|
| EN 1652 | Copper and copper alloy plate, sheet, strip and circles, including brass | CEN |
| EN 1982 | Copper alloy ingots and castings; the 2017 edition was withdrawn in 2024 for a 2024 revision | CEN |
| EN 1254-1 (GSO EN 1254-1:2024) | Copper alloy capillary fittings for copper tube | CEN; GSO |
| Municipality or water authority approval | Brass fittings and valves in potable water systems | The emirate's water authority |
| ECAS or EQM conformity | Regulated finished products | MoIAT |
The GSO EN 1254-1 record shows capillary fittings of copper alloy in the 6 to 108 mm range, approved in October 2024. Sheet and strip follow EN 1652, and brass castings follow EN 1982. For UAE conformity of finished goods, read the ECAS and EQM guide.
When you buy bar for machining, ask for the alloy to be marked or tagged on every bundle. Brass grades look alike, and a mix-up between a leaded free-machining bar and a cold-forming bar is only found when parts crack or tools wear. Keep offcuts and chips by grade, since they are worth money and mixing grades reduces their value.
UAE brass supply comes from metal stockists and traders in Dubai, Sharjah and Ajman, machine shops and fabricators, and brand distributors of fittings and valves. Brands listed here that make brass components include Flowflex (brass compression fittings and check valves), Pegler Yorkshire (brass and bronze valves), Nibco (bronze and brass valves and copper fittings) and Wieland (rolled brass strip and sheet).
The sourcing guide compares manufacturer, distributor and stockist routes, and you can post your requirement with grade, form, size and quantity.
Brass price follows the copper and zinc markets plus a conversion charge, while lead time follows whether the size is stocked. Machined parts add programming, tooling and inspection.