Compressed air filters remove particles, water droplets, oil aerosol and oil vapour so that air reaches the purity class a UAE plant specifies. This page explains the filter types and grades, where each goes in the line, the ISO 12500 and ISO 8573-1 standards, and the brands and distributors that supply filters and elements.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified compressed air filters suppliers who quote for your order directly.
Tell us about compressed air filters in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Compressed air filters are housings with replaceable elements that remove solid particles, liquid water, oil aerosol and oil vapour from compressed air. In the UAE they sit in the line between the compressor, dryer and point of use, as one of three parts of compressed air treatment for UAE plants. Which element you fit decides whether the air reaches the ISO 8573-1 class you wrote in the specification.
Three ISO test standards cover the main jobs. ISO 12500-1:2007 sets the test for coalescing filters that remove oil aerosols. ISO 12500-2:2007 covers adsorbent filters for oil vapours. ISO 12500-3:2009 covers particulate filters. A maker that quotes a grade should be able to say which test it used.
| Filter type | What it removes | Typical UAE use | Key specification points |
|---|---|---|---|
| Water separator or cyclone | Bulk liquid water and large droplets | Downstream of the aftercooler or receiver | Drain type, pressure drop, no element to change |
| General purpose coalescing filter | Particles and oil aerosol at a coarse grade | Workshop air, tool air, protection ahead of a dryer | Grade, element life, differential pressure gauge |
| High efficiency coalescing filter | Fine oil aerosol and sub-micron particles | Before a desiccant dryer, paint lines, instruments | Oil carry-over in mg/m3 on the ISO 12500-1 basis |
| Activated carbon filter | Oil vapour and odour | Food and beverage, breathing air preparation, electronics | Capacity and life, ISO 12500-2 basis, change on schedule |
| Dust or particulate filter | Dry particles, such as desiccant dust | After a desiccant dryer | Particle size rating, ISO 12500-3 basis |
| Sterile or microbial filter | Micro-organisms | Pharmaceutical and food contact air | Validation, steam sterilisation, client rules |
The filter is only part of the system. Moisture comes out at the air dryers and storage happens in an air receiver, so place the filter stages accordingly. For a UAE plant using air on pneumatic cylinders and valves, see pneumatic systems for the filter-regulator-lubricator units at the machine.
Put a coarse water separator after the aftercooler, a coalescing filter ahead of any desiccant dryer, and finer filters or carbon after the dryer, then add point-of-use filters only where one machine needs better air than the rest. This staging keeps fine elements from clogging early.
A general purpose coalescing filter after the receiver protects the dryer and downstream pipework. A second finer stage after the dryer takes the remaining oil aerosol and particles to the class on your specification. Choose differential pressure indicators so the elements are changed on pressure drop rather than by guess.
One painting booth or one instrument loop may need a higher class than the factory. Fit the fine filter or carbon stage at that point instead of upgrading the whole plant. This saves pressure drop, and pressure drop costs compressor energy every hour of the year.
Desert dust arrives at the compressor intake and in the shop air. Intake filters take most of it, but dust filters after the dryer still matter. Hot plant rooms mean warm air through the filter, which makes carbon elements saturate sooner, so ask the maker for the life at your temperature.
Compressed air filters in the UAE are specified by purity and test standards: ISO 8573-1 for the air class and ISO 12500 parts 1 to 3 for filter testing. No UAE approval is aimed specifically at the filter, but hazardous area locations and food contact lines bring extra rules. This was checked in October 2026.
| Requirement | Applies to | Authority |
|---|---|---|
| ISO 8573-1:2010 | Purity classes for particles, water and oil | ISO |
| ISO 12500-1:2007 | Test method for coalescing filters, oil aerosols | ISO |
| ISO 12500-2:2007 | Test method for adsorbent filters, oil vapours | ISO |
| ISO 12500-3:2009 | Test method for particulate filters | ISO |
| ECAS-Ex or EQM routes | Electrical drain valves and sensors in hazardous areas | MoIAT |
| Food and pharmaceutical client rules | Compressed air in contact with product | Brand owner or regulator |
The ECAS and EQM conformity guide explains regulated products. For food contact air, the client's quality team normally sets the code, so ask for it before quoting.
Compressed air filters come from compressor makers, filtration specialists, authorised distributors and traders. The compressor maker's own filters match its dryers and are easy to service. Independent filtration brands offer a wide range of housings and grades. Always buy elements from the housing maker or an authorised distributor, because mismatched elements break the seal.
ListGCC includes makers with filter ranges: Atlas Copco, Kaeser Kompressoren, Ingersoll Rand, BOGE, CompAir, Gardner Denver and Parker. Check each current catalogue for the grades and housings. Use our guide to sourcing industrial suppliers in the UAE, or post your requirement.
The housing is a one-time cost, but elements are recurring, so lifetime cost is driven by element price and change interval. Lead time is short for stocked sizes and longer for large housings and special grades.
Ask for initial and saturated pressure drop and the change interval, not just the price of the housing.
When food, pharmaceutical and electronics plants need an oil-free compressor, what Class 0 certification means, how heat affects oil-injected filtration, which oil-free technology fits, and how to test the air.
How to pick a compressed air dryer for Gulf heat and humidity: pressure dew point, refrigerated vs heatless and heated desiccant, correction factors at 45°C, purge losses, drains and condensate.
How to choose an industrial air compressor for Gulf plants: compressor types, oil-free air and ISO 8573-1 classes, FAD sizing, VSD, dryers, heat and dust, UAE and Saudi rules, brands and an RFQ checklist.