Compressed Air Filters Suppliers, UAE

Compressed air filters remove particulates, oil aerosols, and oil vapour from compressed air to protect downstream equipment and meet air quality standards. In the dusty GCC environment, multi-stage filtration is essential to achieve ISO 8573-1 quality classes required by instruments, process equipment, and product contact applications.

0 suppliers found

Active:ASME Clear all

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Request Quotes Clear all filters

Post your requirement, get quotes from multiple suppliers

Tell us about compressed air filters in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

Compressed air filters are installed downstream of compressors and dryers to remove contaminants including solid particulates, liquid water, oil aerosols, and oil vapour. Filtration stages typically include a general-purpose pre-filter (3 to 5 micron), a high-efficiency coalescing filter (0.01 micron for oil removal), and an activated carbon adsorption filter for oil vapour removal. Housings are available in aluminium, carbon steel, and stainless steel for flows from 10 to 50,000 cfm.

In the UAE and Saudi Arabia, compressed air filtration protects pneumatic control instruments, spray painting and coating equipment, food and pharmaceutical production, electronics manufacturing clean rooms, and breathing air systems. Buyers should specify the required ISO 8573-1 quality class for particles, water, and oil, system flow rate and pressure, and filter element replacement availability from regional stock.

Procurement considerations include pressure drop across the filter (which increases operating cost), element replacement frequency in dusty GCC environments, and differential pressure monitoring to indicate when elements need changing. Regional compressed air distributors stock replacement elements for all major filter brands and offer system audits to verify that installed filtration meets the specified air quality class.

Frequently Asked Questions — Compressed Air Filters

What filter stages do I need for ISO 8573-1 Class 1.2.1 air?

Class 1.2.1 requires particulate removal to 0.1 micron, pressure dew point of minus 40 degrees Celsius (from the dryer), and oil content below 0.01 mg per cubic metre. This typically requires a pre-filter, high-efficiency coalescing filter, and activated carbon filter downstream of a desiccant dryer.

How often should compressed air filter elements be replaced?

Replace elements based on differential pressure readings, typically when pressure drop reaches the manufacturer's recommended limit (usually 350 to 500 mbar). In dusty GCC conditions, pre-filter elements may need replacement every 3 to 6 months. Coalescing and carbon elements typically last 6 to 12 months.

Does the GCC dust environment require special filtration?

Yes, the high ambient dust levels in the GCC increase particulate loading on compressor intake filters and downstream compressed air filters. Pre-filtration at the compressor inlet and more frequent element replacement schedules are standard practice to maintain air quality and protect downstream equipment.