Carbon steel sheets and coils in the UAE are the hot rolled, cold rolled and galvanised flat products that roll formers, duct makers, panel makers and fabricators turn into roofing, ducting, enclosures and light structures. This page explains the product types, coatings and tolerances, which checks apply as of 2026, who supplies, and what moves price and delivery.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified carbon steel sheets & coils suppliers who quote for your order directly.
Tell us about carbon steel sheets & coils in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
UAE buyers order carbon steel flat product as hot rolled coil and sheet, cold rolled coil and sheet, and coated coil (galvanised, zinc-aluminium or pre-painted), and the choice of finish decides what the steel can be used for. These are one of four product forms in the carbon steel category for the UAE, next to plate, bar and pipe.
| Product | What it is | Typical UAE use |
|---|---|---|
| Hot rolled coil and sheet | Rolled hot, black surface with mill scale; sold as coil, cut sheet or slit strip | Heavy fabrication, tanks, chassis, tube making, structural light gauge |
| Cold rolled coil and sheet | Rolled cold for surface and thickness control, usually oiled | Appliance cases, enclosures, cabinets, light fabrication |
| Galvanised coil and sheet | Zinc-coated for corrosion protection | Ducting, roofing, cable trays, framing and panels |
| Zinc-aluminium coated (Galvalume type) | Aluminium-zinc coating for roofing and cladding | Roof and wall sheeting, see the roofing page |
| Pre-painted coil | Organic coating on metallic coated base | Roofing, cladding, sandwich panel facings |
Mill ranges follow the same split. Tata Steel's product page lists hot rolled sheets and coils, cold rolled sheets and coils, and galvanised plain steel in sheet and coil form. JSW Steel lists hot rolled coils, plates and sheets, cold rolled coils and sheets, galvanised and Galvalume steel. ArcelorMittal's flat products site presents metallic coated and organic coated steel. A coil is described by thickness, width, internal diameter and coil weight; a sheet by thickness, width and length.
Products above 3 mm and cut flat are covered in carbon steel plates. Finished roofing profiles belong to metal roofing sheets, and the sandwich panels that use coated coil facings to insulated metal panels. Formed decking is in steel decking. Round and flat stock is under carbon steel bars and rods, and tube made from coil under carbon steel pipes.
Specify the base steel standard, the coating type and mass, the thickness tolerance and the surface finish on the order, because "GI sheet" tells a mill almost nothing. EN 10346 covers continuously hot-dip coated steel flat products for cold forming, with zinc (Z), zinc-iron (ZF), zinc-aluminium (ZA) and aluminium-zinc (AZ) coatings, for thicknesses from 0.20 mm up to just under 3.0 mm. It is the document most Gulf buyers reach for when a European-style coated coil is on the enquiry.
For uncoated hot rolled material, EN 10051 sets tolerances on dimensions and shape for continuously hot-rolled uncoated plate or sheet and strip up to 2,200 mm wide, in non-alloy and alloy steels. The page for the 2010 edition shows that it was replaced in 2024, so quote the current edition on your order.
Think about downstream processing. A roll former needs consistent yield strength and coating adhesion. A duct maker wants flat, oiled-free galvanised sheet. A tube mill or stamping shop cares about coil width and edge condition. Slitting, cut-to-length and levelling are available locally, and a stockist with a slitting line is often more useful than one that only sells full coils. Fabricators who cut and fold sheet are under sheet metal fabrication and ductwork and insulation.
Humidity, salt and heat decide coating weight and storage. In coastal Dubai, Sharjah and Ajman, uncoated cold rolled sheet shows rust bloom within days in damp air, and white rust forms on galvanised sheet that is stacked wet or packed without ventilation. Order oiled or film-protected sheet, keep coils indoors on dunnage, and open wrapped coils promptly.
For outdoor roofing and cladding in a salty coastal setting, a heavier coating or a pre-painted system is usual, selected from the roofing supplier's guarantee. Zinc-aluminium coated coil has a reputation for good performance outdoors, but the coating weight and paint system should come from the specification. Cut edges and fixings are where corrosion starts, so ask how the supplier treats them.
As of 2026, coated and rolled sheet is bought against the product standard and the mill test certificate, and conformity rules depend on end use. The January 2026 legal guide to importing construction materials names rebar, structural sections, plates and hollow sections as requiring ECAS and does not name sheet or coil, so ask MoIAT whether your product and HS code are regulated.
| Requirement | Applies to | Authority or source |
|---|---|---|
| Product standard (EN 10346, EN 10051, ASTM or JIS equivalent) | Every coil and sheet order | Purchase specification |
| Mill test certificate, EN 10204 type 3.1 | Structural and project steel | Specification, inspector |
| ECAS or EQM registration | Regulated construction products; confirm scope for sheet and coil | MoIAT |
| Fire and façade product approvals | Panels and cladding made from coil | UAE Civil Defence, manufacturer approvals |
Our ECAS and EQM guide explains the schemes on import.
Coil reaches UAE users from imported mill programmes, importers with warehouse stock, and local processors who slit and cut. Brands in our directory include Tata Steel, which lists hot rolled, cold rolled and galvanised sheet and coil; JSW Steel, whose range covers hot rolled, cold rolled, galvanised and Galvalume steel; and ArcelorMittal, whose flat products site presents galvanised and pre-painted steel.
The Abu Dhabi producer EMSTEEL lists billets, rebar, wire rod, heavy sections and sheet piles, so flat product largely comes by sea through Jebel Ali and Khalifa Port. Check origin, coating mass and certificates before you commit to a container. The sourcing guide at how to source industrial suppliers in the UAE and Saudi Arabia explains the differences between mills, distributors and stockists. For multi-size coil and sheet lists, post your requirement.
Price follows global hot rolled coil prices, base and coating, thickness, width, and processing, and lead time follows stock. Common thicknesses of hot rolled and galvanised sheet in standard sizes leave a yard within days. Specific coating masses, pre-painted colours, wide or thin gauges and special steel grades are made to a mill programme, and container shipping to Jebel Ali takes weeks.
Slitting, cutting to length, levelling and film wrapping add processing time and kerf loss. Compare quotes on the delivered price per usable tonne, and ask for certificates with each coil number.
