Storage tanks and terminals in the UAE covers the crude and product tanks, LNG storage, marine and truck loading arms and tank farm equipment used at refineries, export terminals and the commercial storage hubs of Fujairah, Jebel Ali and Ruwais. This page explains the types we list, how heat and salt air shape tank specifications, which codes apply (API 650, 653, 620, 2350, OCIMF) and what drives cost and schedule.
0 suppliers found · 4 subcategories
Skip the search. Post your requirement and we'll connect you with verified storage tanks & terminals suppliers who quote for your order directly.
Tell us about storage tanks & terminals in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Storage tanks and terminals are the large aboveground tanks, jetties, loading systems and tank farm hardware that hold crude, refined products, chemicals and liquefied gas between production, refining and shipping. In the UAE they form part of midstream oil and gas, and the market is unusual in the Gulf because much of the capacity is commercial storage rented to traders, not only owner-operated tanks at refineries.
The centre of that commercial market is the Fujairah Oil Industry Zone on the Gulf of Oman coast. Gulf News reported in 2019 that FOIZ, set up in 2011, held about 10 million cubic metres of refined product storage, which it described as the largest commercial storage capacity in the Middle East; check current figures with FOIZ, as terminals have been added since. Other clusters sit at Jebel Ali in Dubai, Hamriyah in Sharjah and at Ruwais, where ADNOC refining and export facilities need their own tank farms.
| Type | Typical UAE use | Key specification |
|---|---|---|
| Crude oil storage tanks | Refinery feed tanks, export and strategic crude storage | API 650 welded tanks, external floating roof, mixers, bottom design and cathodic protection |
| Product and chemical tanks | Gasoline, diesel, jet and fuel oil storage for trading and bunkering | API 650 with internal or external floating roof, coatings for product purity, vapour control |
| LNG and refrigerated storage systems | LNG import or bunkering, LPG and refrigerated gas storage | Low temperature steels, containment concept, boil-off handling; owner specified codes |
| Loading and unloading arms | Marine jetties, truck and rail loading racks | OCIMF marine loading arm specification, emergency release couplings, swivel joints |
| Tank farm equipment | Level gauging, overfill protection, vents, seals, mixers, foam systems | API 2350 overfill prevention, hazardous area certification, fire protection approvals |
Terminals connect to the rest of the chain through pipeline equipment and materials and through pumping and metering stations that move product between tanks, jetties and pipelines.
UAE tanks sit in strong sun on saline coastal ground, so heat raises vapour losses and shell temperatures, salt air and sabkha attack shells, bottoms and roofs, and dust affects seals and vents. The specification should cover each of these, not only the code minimum.
UAE tanks and terminals follow API design and inspection standards named by the owner, OCIMF guidance for marine loading arms, MoIAT ECAS-Ex rules for electrical equipment in hazardous areas, and Civil Defence approval for fire protection. We checked this in October 2026; editions change, so confirm the edition with the owner.
| Standard or approval | Applies to | Issued by |
|---|---|---|
| API Std 650 | Welded tanks for oil storage: non-refrigerated, uniformly supported bottoms, design temperature up to 93 degrees C | API |
| API Std 653 | Inspection, repair, alteration and reconstruction of steel aboveground tanks in service | API |
| API Std 620 | Large welded tanks with gas or vapour space pressure up to 15 psig | API |
| API Std 2350 | Overfill prevention for storage tanks in petroleum facilities | API |
| OCIMF Design and Construction Specification for Marine Loading Arms | Marine loading arms on jetties | OCIMF |
| ECAS-Ex certificate | Level gauges, motors, lighting and other electrical equipment in hazardous areas | MoIAT notified bodies |
| Civil Defence approval | Fire protection systems and listed fire equipment | Emirate Civil Defence authorities |
| ADNOC registration and ICV | Suppliers to ADNOC terminals and refineries | ADNOC, MoIAT |
API 650 sets minimum requirements for design, fabrication, erection and inspection of welded tanks with uniformly supported bottoms in non-refrigerated service with a maximum design temperature of 93 degrees C. Inspectioneering lists a 14th edition from August 2025, so check which edition the owner's specification names. API 653 picks up once the tank is in service and covers the foundation, bottom, shell, roof, appurtenances and nozzles to the first flange; it takes precedence over API 650 where they conflict.
API says its Standard 2350, 5th Edition, helps owners and operators put in place a comprehensive overfill prevention system, with more emphasis than before on reaction times to alarms, prevention programmes and management systems. In practice this drives the choice of independent high-level alarms, radar level transmitters and procedures for each receipt.
Foam systems, monitors and fire water equipment at UAE terminals need Civil Defence approval of the products and the design. Our guide to UAE Civil Defence approval for fire safety equipment explains the process, and suppliers are listed under fire fighting equipment.
Tanks in the UAE are usually built on site by specialist tank erection contractors from plate fabricated locally or imported, while loading arms, gauging systems, vents and seals come from OEMs and their authorised distributors. Terminal operators also buy services: cleaning, inspection to API 653 and repairs.
To get quotes from UAE tank and terminal suppliers, post your requirement with the tank data sheet or the jetty duty.
Tank cost follows diameter, height, plate thickness, roof type and coatings; schedule follows plate supply, foundation work, site welding and hydrotest water. Loading arms and gauging systems are made to order by OEMs. ListGCC does not publish prices.