Sand control equipment stops formation sand and fines from entering a producing well, using downhole screens, gravel packs and related completion tools. In the UAE the need is selective, tied to weaker sandstone intervals. This page covers screen types, ISO 17824 scope, how sand analysis drives selection and how to source.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified sand control equipment suppliers who quote for your order directly.
Tell us about sand control equipment in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Sand control equipment keeps reservoir sand and fines out of the wellbore while letting oil and gas through. SLB describes sand control technologies as preventing migration of reservoir sand and fines into a wellbore, which stabilises the reservoir and extends completion lifetime. Without it, produced sand erodes chokes, wears pump stages and fills separators, and it can bury the perforations.
Most oil in the Gulf comes from carbonate reservoirs where sand control is not a routine need, so it is a selective purchase in the UAE, tied to sandstone intervals, weakly consolidated formations and some gas wells. That is a general engineering observation; ask the reservoir team whether the specific interval produces sand before you write a specification. It belongs to the oil and gas production equipment range, next to the lift methods in artificial lift systems.
| Equipment | What it does | What to specify |
|---|---|---|
| Wire-wrap screen | Shaped wire wound on a perforated base pipe, with a fixed slot opening | Slot width, wire profile, base pipe size and grade, alloy |
| Pre-pack screen | Screen with a resin-bonded or gravel layer between inner and outer screens | Pack grain size, temperature rating, plugging tolerance |
| Metal-mesh screen | Layered woven mesh that filters sand across a larger area | Mesh rating, erosion resistance, shroud design |
| Gravel pack | Graded gravel placed around the screen in the annulus | Gravel size, carrier fluid, pump rate, open hole or cased hole |
| Frac pack | Short fracture combined with a gravel pack | Fracture design, proppant and screen compatibility |
| Flow control devices and packers | Balance inflow along the screen and isolate zones | Nozzle or channel type, packer rating |
ISO 17824 sets requirements and guidelines for sand control screens, covering design, design validation, functional evaluation, manufacturing, storage and transport. It applies to wire-wrap, pre-pack and metal-mesh screens. The Swedish standards body lists the European adoption, EN ISO 17824:2014, as valid, and an ISO catalogue should be checked for any newer work, as of 2026.
The exclusions are what trip buyers up. The standard does not cover expandable sand screens, slotted liners or tubing, and accessories such as centralizers or bull plugs. It excludes shunt screen technology, inflow control devices, downhole sensors and selective isolation devices even when integrated into the screen. It also excludes screen filtration performance criteria, including test methods and sand retention efficiency analysis, and the end connections of the base pipe.
In practice, that leaves four items the purchase specification must define for itself: how sand retention is tested, what the end connections are, how any flow control devices qualify and what accessories are included. Ask suppliers to show their retention test and how it relates to your sand sample.
Sand analysis decides slot size, screen type and whether you also need a gravel pack. A core or produced sample is sieved to give a grain size distribution, and the screen opening is chosen from that curve so that it retains the coarser fraction and lets the finer fines pass without plugging. Too tight and the screen plugs, cutting production; too open and sand gets through and erodes the equipment downstream.
SLB frames the choice as an engineered, integrated service for either an openhole or cased hole application. Stand-alone screens are common in open hole horizontal wells; gravel packs and frac packs are typical in cased holes or higher risk formations. Your completion engineer chooses; the buyer's job is to ask for the selection logic.
Sand control interacts with the lift system. SLB offers downhole screens specifically to mitigate sand production from artificially lifted wells. An ESP, a rod pump or a progressing cavity pump will wear out quickly if sand passes the screen, so decide screen and lift as one design. See electric submersible pumps for a typical pairing, and rod pumping units for the low-rate case.
Screens are damaged more often in handling than in service. Ask the supplier for written handling and storage instructions, which ISO 17824 lists in its scope alongside storage and transport, and make them part of the contract. Typical items are protectors on threads, support along the full length during lifting, no dragging on pipe racks and covers against dust and sand blowing across the yard.
Before the run, inspect and record. Count the joints against the tally, check each screen for dents, crushed shrouds or damaged wire, confirm slot size and serial numbers against the design, and verify thread condition. Reject any joint with visible damage, since one bad joint can let sand through the whole interval. During the run, control speed and avoid rotating the string where the design does not allow it. Keep the final as-run tally with depths, because later workover decisions depend on knowing exactly where each screen sits. These are standard completion practices, to be set out in your own procedure.
Gravel pack jobs add pumping: carrier fluid, gravel volume, pump rate and pressure are monitored during placement, and the pack is evaluated afterwards. The pumping equipment and service are typically supplied by the completions company along with the screen.
Sand control comes from the large completions companies and specialist screen makers. Baker Hughes lists BAKERMESH sand control screens, BAKERWELD wire wrap screens, BAKERWRAP wrap-on-pipe screens and EXCELLPAK multipath gravel-pack screens, along with EQUALIZER flow control devices and annular packers. Weatherford also supplies sand screens and completion equipment. SLB provides engineered services, screens and pumping equipment for gravel and frac packs.
ADNOC companies buy sand control as part of completion contracts, so a screen supplier often sits under a well services contract. Registration with ADNOC and In-Country Value scoring apply to the supplier of record. To find suppliers for a specific job, post your requirement with the sand analysis, completion type, temperature and required length.
Cost follows screen length, base pipe size and alloy, the screen type, the number of zones, the service for pumping a gravel pack and the testing scope. Alloys for sour service and long horizontal sections add materially to the price. Lead time depends on base pipe availability, screen manufacturing and local assembly. Screens and base pipe are mostly imported and arrive through Jebel Ali or Khalifa Port, and screen runs need rig scheduling as well. Ask each bidder for a dated plan from order to wellsite, and for the handling and storage instructions the standard refers to.
Wellhead and tubular equipment above the screen are covered separately; see wellhead equipment.