Blowout preventers (BOPs) in the UAE are the stacked annular and ram valves bolted to the wellhead on a drilling or workover rig that seal the well if kick pressure arrives. UAE buyers are rig contractors and operators, who specify stack pressure rating, API 53 testing and OEM service. This page covers types, standards, spares and what drives price and delivery.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified blowout preventers suppliers who quote for your order directly.
Tell us about blowout preventers in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
A blowout preventer is a large valve assembly mounted on top of the wellhead during drilling, completion or workover. If formation fluid or gas enters the well faster than the mud column can hold it back, the crew closes the BOP to seal around the pipe, seal an empty hole, or cut the pipe and seal. It is one of the four product groups under wellhead equipment in the UAE, and it comes into play before the Christmas tree is installed.
A stack mixes two families. Annular preventers close on any pipe size through a rubber element; ram preventers close with hydraulically driven steel blocks.
| Component | What it does | Specification points |
|---|---|---|
| Annular preventer | Closes a rubber packing element around any pipe, or an open hole | Bore and pressure rating, packing compound for temperature and H2S, closing ratio |
| Pipe ram | Closes around one pipe size | Ram block size, variable bore options, ram locks |
| Blind ram | Closes an empty hole | Rated pressure, elastomer |
| Shear ram | Cuts pipe and seals the well | Pipe grade and wall that must be cut, force available from the operating system |
| Control unit (accumulator) | Stores hydraulic energy to close the stack quickly | Volume, closing time, remote panels, backup pumps |
| Choke and kill manifold | Routes well fluid and kill fluid during a well control event | Working pressure, sour service trim, remote chokes |
The stack sits below the rig floor and connects through a spool to the wellhead described on the parent page. It is built from a bore size and a pressure rating that match the well plan.
Three makers cover most of the stacks on Gulf rigs. Cameron, now part of SLB, builds ram and annular preventers, and its Type U ram preventer is widely used. HMH Hydril carries the Hydril annular line: the maker lists annular BOPs from 7 to 18 inch bore at 3K to 15K pressure ratings, with the GXP as its most advanced offshore annular in 13 5/8 inch 5K and 10K and 18 3/4 inch 10K sizes, and the GK 13-5M compact with a radial latch head brought back for on-demand supply. NOV is the third big name for drilling rigs and pressure control equipment.
Wear parts follow the stack. Oteco does not build complete BOPs; it makes replacement packing units and seals for widely used models such as the Hydril GK and MSP, Regan K and Shaffer spherical preventers, offered in natural, nitrile and neoprene rubber compounds. Packing units are replaced on a schedule, and the compound is chosen for temperature, mud type and H2S exposure. For gate valves and chokes in the same stack, see wellhead valves and Christmas trees.
When the driller sees a pit gain or a flow with the pumps off, the crew stops drilling, lifts the string and closes the annular or a pipe ram, then reads the shut-in pressures. The well fluid is circulated out through the choke and kill manifold while the heavier kill mud goes in. Every step depends on equipment being ready: the accumulator must close the stack within the time the operator allows, the remote panels must work, the rams must match the pipe in the hole, and the choke operator needs a manifold that can take the pressure without washing out. A stack is therefore bought as a system, not as separate valves, and drills at the rig test the people as well as the iron.
As of 2026, the UAE has no separate national certificate for a BOP. The operator and rig contractor call up international standards and the operator's well control policy. Equipment is normally supplied to API specifications, with the rig contractor and operator checking testing and recertification records.
| Requirement | Applies to | Who sets it |
|---|---|---|
| API 16A | Drill-through equipment: annular, ram and other BOPs, as called up by the maker's product data | API, referenced in maker literature |
| API Standard 53, fifth edition | Installation, testing and use of blowout prevention equipment systems on land and marine drilling rigs | API, adopted through operator policy |
| Operator well control policy | Test frequency, shear capability, crew training and certification | ADNOC group operating companies, international operators |
| Rig contractor safety management system | Maintenance and recertification intervals | Drilling contractors |
| ECAS-Ex | Electrical control panels and sensors in hazardous areas | UAE conformity scheme |
Drilling Contractor reported that the fifth edition of API Standard 53 moved BOP requirements to be based on the maximum anticipated surface pressure of the well, rather than the rated working pressure of the equipment, and it added language for onshore BOP equipment. Treat this as a prompt to check the edition your operator uses. Our parent page explains API 6A ratings for the wellhead below the stack, and the pipe fitting and flange standards guide covers the connections.
Abu Dhabi wells include sour gas and high-pressure reservoirs, so elastomers, steel grades and choke manifold trim are chosen for H2S service and for temperature. Summer heat on a land rig raises the temperature of hydraulic oil, rams and rubber, and hot sand and dust damage ram seals and hydraulic connections if covers are left off. Offshore rigs add salt air, which corrodes control panels and fittings, and island and offshore rigs need spares shipped to the right port before the job.
These are practice points rather than rules and should be confirmed in the well plan.
Choose by what you need: a new stack, a rented stack, repair and recertification, or spares. New stacks come from the OEM or an authorised distributor, with documentation, factory tests and traceable materials. Rental and recertification come from service companies with approved workshops in the Gulf; one example is Cansco Well Control, listed with facilities in Jebel Ali. Parts for older stacks come from the OEM or from independent makers of replacement elements.
Rig and drilling equipment overall sits under drilling equipment and services and drilling rigs, and mud systems are on drilling fluids and mud chemicals. Tubulars that run through the stack are on casing and tubing.
For comparison quotes, post your requirement with your well plan and stack drawing.