X-ray inspection systems in the UAE are enclosed food inspection machines that find metal, glass, stone, dense bone and hard plastics inside packs, jars and cans, and check fill level and missing items at line speed. This page explains the types, what they can and cannot see, the FANR radiation rules and HACCP duties that apply as of 2026, and what drives price and lead time, above the listings of UAE suppliers.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified x-ray inspection systems suppliers who quote for your order directly.
Tell us about x-ray inspection systems in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
A practical guide to specifying and buying food and beverage packaging machinery in the UAE and Saudi Arabia, from machine selection to FAT, SAT and spares.
A food X-ray system passes a low-energy beam through each pack and builds an image from how much is absorbed; anything denser than the product shows up and the pack is rejected. That lets it find contaminants a metal detector cannot, which is why it sits alongside detectors in food safety and quality equipment for the UAE. It also works through foil and metal lids.
| Type | Typical UAE use | Key specification points |
|---|---|---|
| Top-down single energy | Packed snacks, confectionery, frozen and chilled packs, pouches in foil or metallised film | Detection on your product, belt width and speed, image resolution |
| Dual energy | Products with overlapping or uneven pieces such as nuts, frozen vegetables, chicken pieces | Separation of low-contrast contaminants such as bone and some plastics |
| Side-view (horizontal beam) | Glass jars, bottles, cans and upright cartons on beverage, sauce and dairy lines | Container height, glass-in-glass detection, fill level checks |
| Bulk or loose product | Unpacked nuts, dates, raisins, frozen fruit before packing | Throughput, reject method for loose flow, product depth on the belt |
| X-ray with checkweigher | Retail packs where weight and contaminants are checked on one frame | Shared reject and data, see checkweighers on UAE packing lines |
X-ray finds contaminants by density, not by conductivity. Makers list metal (including stainless steel and non-ferrous metal inside foil), glass, ceramics, stone, calcified bone and hard, dense plastics. It also checks missing items, under-fill, broken products and product trapped in seals. It does not reliably find low-density material: wood, paper, cardboard, insects, hair and most thin soft plastics. Those stay with supplier controls and good manufacturing practice in your HACCP plan.
Compared with metal detectors for UAE food lines, X-ray is usually the better choice for metallised packs, foil trays, cans and jars with metal lids, and where glass, stone or bone is the main hazard. For a dry product in plain film where metal is the only real risk, a metal detector is cheaper and simpler.
Two sets of rules apply as of 2026: radiation safety, regulated federally by the Federal Authority for Nuclear Regulation (FANR), and food safety, where the X-ray is a control measure in the HACCP-based programme required by Dubai Municipality and ADAFSA. Confirm the radiation category with FANR before installation.
| Requirement | Applies to | Authority or source |
|---|---|---|
| Licence or registration certificate for regulated activities with radiation sources (registration is for activities that do not warrant full regulatory control, under FANR-REG-29) | Possession and use of X-ray generating equipment in the UAE | FANR |
| HACCP-based food safety programme with monitored, verified CCPs | Food establishments in Dubai; food business operators in Abu Dhabi | Dubai Municipality Food Code; ADAFSA |
| Calibration or standardisation of instruments that affect safety or legality | Routine test samples and recorded checks of the X-ray | Dubai Municipality Food Code, section 2.9.4 |
| Cabinet emission limit of 0.5 milliroentgen per hour (US benchmark many makers design to) | Cabinet X-ray systems sold into the US | US FDA, 21 CFR 1020.40 |
Ask the supplier which documents they provide for the FANR application (leakage survey, shielding description, interlock design) and who in your plant will be named as responsible for radiation safety. A HACCP consultant in the UAE can set the critical limits and test routine for the CCP.
The X-ray generator and detector are heat sensitive, so ambient temperature and cooling are the main UAE concerns. Check the maximum ambient rating before you choose a location.
Food X-ray systems are sold in the UAE through manufacturer offices and authorised distributors who also handle commissioning and service. Makers include Ishida X-ray inspection systems, Mekitec MEKI and side-view X-ray units, Fortress Technology Icon X-ray systems, Mettler Toledo product inspection and Bizerba XRE X-ray inspection.
The packaging machinery buying guide for GCC food plants covers where X-ray sits in the line. For several UAE quotes, post your requirement.
Price follows the inspection task: beam configuration, belt width, detection performance on your product and the reject package. Lead time follows configuration, factory build slots and the time needed for radiation approval before use.