Screwdrivers and hex keys drive slotted, cross-head, Torx and hexagon socket screws by hand. This page helps UAE buyers match tip profile and size to the fastener, choose insulated tools for electrical work, understand ISO 2936 for hex keys, and find brands, stockists and realistic lead times in Dubai, Sharjah and Abu Dhabi.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified screwdrivers & hex keys suppliers who quote for your order directly.
Tell us about screwdrivers & hex keys in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Screwdrivers and hex keys are hand tools that turn screws by the profile in the head, and the first buying decision is the tip, not the brand. UAE electricians, panel builders, instrument technicians, MEP installers and machine fitters each carry a different set. They are filed under the hand tools category for the UAE, beside wrenches and spanners.
| Type | Typical UAE use | What to specify |
|---|---|---|
| Slotted screwdriver | Terminals, older equipment, general work | Blade width and thickness to match the slot |
| Phillips and Pozidriv | Panels, enclosures, MEP fixings, plasterboard | Profile and point size (PH or PZ number); the two are not interchangeable |
| Torx (star) screwdriver | Machine guards, vehicle and equipment fasteners | T size, tamper-resistant version if needed |
| Hex key (L-key) | Hexagon socket screws on machinery and fittings | Metric or imperial AF size, short or long arm, ball end |
| T-handle hex driver | Faster turning and better feel on machine maintenance | AF size, shaft length, handle material |
| Insulated (1000 V) screwdriver | Live and near-live electrical work | IEC 60900 marking, tip, shaft insulation |
| Precision screwdriver set | Instruments, relays, electronics | Small tip sizes, swivel top, anti-static if needed |
| Interchangeable bit driver set | Mixed fleets and site kits | Bit profiles, holder, magnetic tip |
For gripping, holding and cutting alongside screw work, see pliers and cutters. When a screw has a required tightening value, a hand screwdriver is not enough: use a torque screwdriver or the wider range of torque tools. For powered driving, see drills and impact drivers.
Match the tip to the fastener exactly, then choose insulation, length and grip. A tip that does not fit damages the screw head and the tool, and in electrical work it may slip into live parts.
Phillips and Pozidriv look alike and are often confused. Using a Phillips driver in a Pozidriv screw, or the reverse, chews the recess. Buy sets with both and keep them labelled, and check imported equipment for the profile it uses. For Torx and hex socket screws, the driver must be fully seated to the bottom of the recess.
ISO 2936:2014 specifies the dimensions, test method, designation and marking of hexagon socket screw keys, and its specification applies to tightening hexagon socket screws of property class up to 12.9. Using a worn or poor-quality key on high-strength screws rounds the socket and the key. Replace keys that show rounded corners, and ask for ball-end versions only where angled access is needed, since ball ends carry less torque than the straight end.
For electrical work, buy screwdrivers made and tested to IEC 60900:2018 for up to 1000 V AC and 1500 V DC, with the marking on the tool and an intact shaft insulation. Remove any screwdriver with a nicked or slipped sleeve. The parent hand tools page covers the wider electrical hazard rules.
Handles and shaft coatings age in strong UAE sun, and plain steel tips rust in humid coastal air at Jebel Ali and Khalifa Port. Store screwdrivers in a closed box, keep tips clean and replace magnetised tips when the plating wears.
No federal approval is specific to hand screwdrivers or hex keys in the UAE, and buyers rely on international standards and site rules. Older ISO standards for slotted screwdrivers are listed as withdrawn by ISO, so many makers follow DIN or in-house specifications; ask the supplier which one applies. Table checked in October 2026.
| Requirement | Applies to | Authority or source |
|---|---|---|
| ISO 2936:2014 | Hexagon socket screw keys, up to property class 12.9 | ISO |
| IEC 60900:2018 | Insulated screwdrivers for live working up to 1000 V AC | IEC, via utility and site rules |
| Maker specification or DIN equivalent | Tip dimensions and hardness for slotted, cross-head and Torx drivers | Manufacturer datasheet |
| Accredited calibration certificate | Torque screwdrivers used for QA records | EIAC accredited laboratory |
| ADNOC Supplier Hub registration | Supply to ADNOC group companies | ADNOC |
For how certificates work on any regulated parts, read the UAE ECAS and EQM product conformity guide.
Screwdrivers reach UAE buyers through electrical wholesalers, industrial tool stockists, brand distributors and general traders. For panel shops and maintenance contracts, a stockist with single-size replacements on the shelf is more useful than one that sells only boxed sets.
On ListGCC, professional hand-tool makers with screwdriver and hex key ranges include Gedore, Stahlwille, Facom, Snap-on, Teng Tools and King Tony. Teng Tools is known for colour-coded, modular tool control systems. Vet any trader using how to source industrial suppliers in the UAE and Saudi Arabia, then post your requirement for quotes.
Put profile, size, length, insulation and quantity on the enquiry.