Pipeline valves in the UAE are the API 6D ball, gate, plug and check valves that isolate, sectionalise and protect oil, gas and water transmission lines and their stations. This page lists UAE pipeline valve suppliers and explains valve types, piggability, double block and bleed sealing, buried and sour service options, the API 6D and ISO 14313 documents a specification will name, and what drives price and lead time.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified pipeline valves suppliers who quote for your order directly.
Tell us about pipeline valves in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Pipeline valves are valves built to API Spec 6D for transmission and gathering lines: they isolate sections, protect against reverse flow and let pigs pass, unlike plant valves that throttle or switch process streams. They are one of the five groups in pipeline equipment and materials for the UAE, and this page goes deeper into choosing them.
| Valve type | Typical UAE use | Key specification points |
|---|---|---|
| Trunnion mounted ball valve, full bore | Mainline block valves, pig trap isolation, station inlet and outlet on ADNOC gas and crude lines | Bore matched to pipe ID for pigging, class, seat design (DBB or DIB), welded or bolted body, buried stem extension |
| Floating ball valve | Small bore vents, drains and instrument connections on pipeline stations | Size and class limits set by seat load, soft or metal seat, fire test certificate |
| Through-conduit slab or expanding gate valve | Piggable isolation on liquid lines, tank farm and terminal manifolds | Smooth bore with gate open, seat sealing, cavity relief, operator torque |
| Twin seal or lubricated plug valve | Meter skids, product segregation at terminals, tank isolation needing verified shut-off | Double block and bleed with body bleed, seal material for the products, cycle frequency |
| Check valve (swing, piston, axial, dual plate) | Compressor and pump discharge, downstream of meter runs, line protection | Piggable or not, closing speed against surge, orientation, pressure drop |
Valves are bought with the line they sit in: wall and bevel must match the line pipe and high-yield fittings, and isolation valves on pig traps must be full bore for the pigging equipment to pass. Many mainline valves are motorised or gas-over-oil operated; the valve actuators category covers those. For plant service valves, see industrial ball valves and gate valves.
Choose UAE pipeline valves by line function first (block, isolation for maintenance, or non-return), then piggability, sealing philosophy, installation (buried or above ground) and fluid. Sour gas, sabkha soils and high surface temperatures change materials and coatings more than the valve type.
API 6D distinguishes a double block and bleed (DBB) valve, which seals at two seats with the body cavity vented between them, from double isolation and bleed (DIB) valves, where one or both seats seal against pressure from the cavity side as well. The choice affects whether one valve can be used for positive isolation during maintenance, so state the required arrangement (DBB, DIB-1 or DIB-2) and the cavity relief method rather than writing "DBB" loosely.
Mainline valves are often buried with stem extensions to grade. Ask for the body coating to be compatible with the line coating and cathodic protection, for sealant and vent lines brought up with the stem, and for the extension to be sealed against sand and water. A buried welded body valve cannot be repaired in place, so its seats and seals need to last the design life.
Abu Dhabi sour gas systems call for valve bodies, trims and bolting that meet NACE MR0175/ISO 15156 limits, sometimes with clad or duplex trims. Confirm that the valve maker has qualified the same materials and welding for sour service, and that seat and seal elastomers are rated for the gas composition, including resistance to explosive decompression on fast blowdown.
At block valve stations exposed to summer sun, soft seats and actuator electronics see high surface temperatures. Ask for the seat material's temperature rating, sun shades or enclosure ratings for actuators, and a fire test certificate where the owner specification calls for fire-safe design.
UAE pipeline valves are specified to API 6D or ISO 14313, with materials and testing extended by the ADNOC or EPC valve specification. As of 2026, there is no UAE product certificate for pipeline valves; supplier approval with ADNOC and MoIAT's ICV score decide who can bid.
| Requirement | Applies to | Body |
|---|---|---|
| API Spec 6D, 25th edition | Design, manufacture, testing and documentation of pipeline valves | American Petroleum Institute |
| ISO 14313:2025 | Axial, ball, check, gate and plug valves; supplements API 6D 25th edition, ASME Class 150 to 2500 | ISO |
| ASME B31.4 / B31.8 | Pipeline design codes that set valve spacing and testing context | ASME |
| NACE MR0175/ISO 15156 | Materials for H2S service | AMPP and ISO, as called up by ADNOC |
| ADNOC Supplier Hub registration | Vendors supplying ADNOC group companies | ADNOC |
| In-Country Value (ICV) certificate | Tender scoring | MoIAT |
ISO 14313 was reissued in June 2025. The withdrawn 2007 edition was a standalone standard, while the 2025 edition is written as a supplement to API 6D, so the API document now carries the core requirements. Subsea pipeline valves sat outside the 2007 ISO scope and are ordered to separate subsea standards. For pressure classes, seat options and testing in general valve service, see our valve selection guide for GCC projects.
Pipeline valves reach UAE buyers through the makers' regional offices and authorised agents, often with local service centres for actuation and repair; stockists hold only small sizes and common classes. Large bore, high class and sour valves are made to order against project specifications.
Makers on ListGCC include Cameron Grove for trunnion ball valves and its sister brand General Valve for Twin Seal double block and bleed plug valves, both within Cameron (SLB); SVS from Italy for API 6D ball and dual-plate check valves; Flowserve and Velan for steel ball, gate and check valves; and TechnipFMC (FMC Technologies) for gate valves on wellhead and flowline systems.
Ask bidders for the API 6D licence or the owner approval for the specific size and class range, the testing they will do in-house, and the UAE service capability for actuators and seat repairs. To get several quotes against your valve datasheets, post your pipeline valve requirement.
Pipeline valve price follows bore, pressure class, body construction and trim material; lead time follows forging availability, testing and inspection, and actuator integration. Large sour service valves with actuators are among the longest lead items on a pipeline project.
Release valve datasheets with the pipe order, because valve forgings are often the long lead item.