Other non-ferrous metals in the UAE are the nickel alloys, titanium, zinc and lead products that fall outside aluminium and copper: corrosion-resistant alloys for oil and gas, titanium for seawater duty, zinc for galvanizing and anodes, and lead for shielding and roofing. This page lists UAE suppliers and explains the grades, standards, approvals and cost drivers buyers should check before ordering.
0 suppliers found · 4 subcategories
Skip the search. Post your requirement and we'll connect you with verified other non-ferrous suppliers who quote for your order directly.
Tell us about other non-ferrous in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Other non-ferrous metals are the specialist metals that are not iron-based and not aluminium or copper: nickel and its alloys, titanium, zinc and lead. In the UAE they sit within the wider non-ferrous metals category for the UAE, next to aluminium sheet, extrusions and coil and copper, brass and bronze products. Volumes are small next to steel, but the stakes per tonne are high: a wrong nickel alloy grade in a sour gas line or the wrong titanium grade in a seawater exchanger is an expensive mistake.
Each metal has a different buyer. Nickel alloys go to oil, gas and petrochemical projects and the fabricators serving them. Titanium goes to heat exchangers, desalination and chemical plants. Zinc goes to galvanizers and cathodic protection contractors. Lead goes to hospitals and clinics (radiation shielding), battery makers and roofing contractors.
| Metal | Typical use in the UAE | Key specification points |
|---|---|---|
| Nickel alloys for sour service and high temperature | Wetted parts in gas processing, clad pipe and fittings, furnace and flare parts, seawater pumps and fasteners | UNS number and product form standard (plate, bar, pipe, forging); ISO 15156-3 compliance where H2S is present; mill certificate traceable to the heat |
| Titanium sheet, plate, tube and bar | Seawater-cooled heat exchangers, desalination equipment, chlorine and chemical service, offshore fittings | ASTM grade (commercially pure Grade 2 is common; palladium or ruthenium grades for harsher chemistry); ASTM B265 for flat products |
| Zinc ingots, anodes and zinc products | Galvanizing kettles, sacrificial anodes for jetties, tanks and buried pipe, die-cast parts | Ingot grade to ISO 752 or the purchaser's spec; anode alloy and design per the CP specification, often DNV-RP-B401 offshore |
| Lead sheet, bricks and shielding | X-ray and CT room shielding, lead-lined doors, battery manufacture, flashings and weatherings | Thickness or lead equivalence from the shielding design; EN 12588 for rolled building sheet; handling and dust controls |
These metals often end up in assemblies bought elsewhere on the site. Zinc ingot feeds the hot dip galvanizing plants that coat structural steel, and zinc or aluminium anodes are usually supplied as part of cathodic protection systems for pipelines and marine structures.
Coastal UAE sites combine high temperature, high humidity at night and airborne chloride, so the deciding question is usually how the metal behaves in hot seawater or salty condensate, not in dry air. That pushes buyers towards titanium and high-molybdenum nickel alloys for wetted seawater parts and towards zinc for sacrificial protection of carbon steel.
There is no single UAE approval that covers nickel, titanium, zinc or lead as raw materials. Compliance comes from the material standard on the purchase order, the end user's specification (ADNOC group companies, EPC contractors, hospital authorities) and, for lead used in shielding, the radiation licensing of the facility. Confirm current requirements with the end user as of 2026.
| Requirement | Applies to | Authority or owner |
|---|---|---|
| ISO 15156-3 (NACE MR0175) compliance statement | Nickel alloys and other CRAs in H2S-containing oil and gas service | ISO; enforced through ADNOC and EPC material specifications |
| ASTM product specifications, for example ASTM B265 | Titanium strip, sheet and plate; nickel alloy forms have their own ASTM B numbers | ASTM International |
| ISO 752 | Primary zinc ingot classification and composition | ISO |
| DNV-RP-B401 | Design and manufacture of zinc and aluminium galvanic anodes, mainly offshore | DNV |
| EN 12588 | Rolled lead sheet for roofs, flashings and cladding | CEN |
| Radiation facility licence and shielding design | X-ray, CT and radiotherapy rooms that use lead shielding | Federal Authority for Nuclear Regulation (FANR) and the relevant health authority |
| In-Country Value (ICV) certificate | Suppliers bidding to ADNOC and other programme members | MoIAT National ICV Programme |
Ask for EN 10204 type 3.1 mill certificates on nickel alloy and titanium products, and check that the heat number on the certificate is stamped on the material. For lead shielding, the thickness or lead equivalence comes from the radiation protection design approved for the facility, so the supplier should quote against that drawing, not a catalogue value.
Most supply in the UAE is through stockists and traders rather than mills. Nickel alloy and titanium mills sit in Europe, the United States, Japan and China, and UAE stockists in Jebel Ali Free Zone, Sharjah and Abu Dhabi hold common grades and sizes. Zinc and lead come from smelters and recyclers, with ingot, anode casting and lead sheet rolling sometimes done locally.
Before awarding, request the mill certificate for the exact heat offered, the PMI (positive material identification) result for alloy parts, and the anode test reports where anodes are part of the scope. Buyers who prefer several quotes can post your requirement to UAE metal suppliers. Our guide to sourcing industrial suppliers in the UAE and Saudi Arabia covers vetting stockists and traders. Lead-acid battery buyers should look at lead-acid batteries rather than raw lead.
Price follows the base metal market first and the product form second. Nickel and zinc are traded on the London Metal Exchange, so quotes are usually valid for a short window, and lead follows the same market. Titanium sponge and nickel alloy prices also move with alloying elements such as molybdenum and chromium.