Desalination plants in the UAE turn seawater into drinking and process water, mostly by seawater reverse osmosis and by thermal distillation at power complexes. This page covers plant types and scale, how EWEC procures water in Abu Dhabi, Gulf feed water design, the DoE water quality rules and what drives price and lead time.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified desalination plants suppliers who quote for your order directly.
Tell us about desalination plants in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
A desalination plant removes dissolved salts from seawater or brackish water to make drinking or process water. In the UAE there are two families: thermal plants (multi-stage flash and multi-effect distillation, usually built beside power generation) and membrane plants (seawater reverse osmosis, or SWRO). This page treats plants at utility and large industrial scale as part of water treatment equipment in the UAE; the skid and membrane detail sits on the reverse osmosis systems page, and boiler quality polishing downstream is covered under demineralization plants.
| Plant type | Typical UAE use | What to put in the specification |
|---|---|---|
| Seawater reverse osmosis (SWRO) | Independent water projects, island and coastal industrial sites | Intake type, pretreatment train, recovery, membrane array, energy recovery, product salinity and boron, remineralisation |
| Thermal (MSF or MED) | Older power and water complexes where steam is available | Steam supply, heat rejection, scale control, brine heater tube material, availability guarantee |
| Brackish water RO | Inland wells, farms, labour camps, small industry | Feed analysis, silica and hardness, concentrate disposal route |
| Containerised SWRO | Construction camps, remote sites, emergency or temporary supply | Footprint, power demand, mobilisation time, spare membranes held on site |
Recent Abu Dhabi tenders are reverse osmosis, which is why most equipment enquiries today are for pumps, energy recovery, membranes, pretreatment and controls rather than for thermal evaporators.
In Abu Dhabi, large desalination plants are bought by one entity. The Emirates Water and Electricity Company (EWEC) describes itself as the sole procurer of water and power in the emirate, and it buys under long-term water and electricity purchase agreements with production companies. Its project pages, as read in 2026, list the Taweelah reverse osmosis plant at 909,000 cubic metres per day (described as the largest RO desalination plant in the world), the Mirfa 2 (M2) RO independent water project at up to 546,000 cubic metres per day and a further greenfield RO project at up to 273,000 cubic metres per day.
For an equipment supplier the consequence is simple: you almost never sell to the utility. You sell to the developer's EPC contractor, whose approved vendor list decides the brands, and you inherit the performance guarantees written into the purchase agreement. Outside Abu Dhabi each emirate has its own water authority and procurement route, so confirm who the owner is before spending time on a bid. Quotations and datasheets mix units: some owners work in cubic metres per day and others in million imperial gallons per day (MIGD), where 1 MIGD is about 4,546 cubic metres per day. Ask for both on every offer.
Gulf seawater is warmer and saltier than open ocean water, and summer conditions set the membrane and energy design. Ask every bidder for a performance projection at the hottest and coolest feed temperature, not a single nominal figure.
Warm feed lowers the pressure needed to push water through a membrane but raises salt passage and speeds biological growth. Boron passes membranes more easily as temperature rises, so plants aiming at drinking water limits often plan a second pass or a boron-selective stage. The Dow FILMTEC design guidance used by many membrane engineers says the fouling tendency of the feed is the factor with the greatest influence on design, and that seawater designs run at lower flux than clean feeds such as RO permeate.
Grundfos describes two intake routes: beach wells with submersible pumps, where the sand acts as a natural filter, and pump houses with dry-installed pumps and pipelines, which suit larger plants or polluted coastal water. After intake, water goes through multimedia filters and fine cartridge filters, or ultrafiltration instead, before the high-pressure pump. Shallow, sheltered coasts can carry heavy organic or algal load in some seasons, so ask how the pretreatment copes and what the cleaning plan is. Filtration hardware is covered on the water filtration systems page.
The brine leaving the membranes still carries high pressure, and recovering it is the main way to cut power use. Grundfos training material says a pressure exchanger loses only about 2 percent in the hydraulic transfer, and that turbine-driven pumps can reduce energy cost by up to 33 percent. These are manufacturer figures for sizing, not guarantees, so ask for the specific energy (kilowatt hours per cubic metre) the supplier will guarantee at your feed conditions.
As of 2026, the water quality rules that bind a desalination plant owner in Abu Dhabi are the Department of Energy (DoE) Water Quality Regulations 2021, effective 1 January 2021. Equipment imports follow federal conformity rules, and other emirates set their own utility requirements.
| Requirement | Applies to | Authority |
|---|---|---|
| Water Quality Regulations 2021: sampling plan by technology (thermal or membrane) and by plant capacity, with remineralisation and unit records kept | Licensees that operate desalination, transmission and distribution in Abu Dhabi | Department of Energy, Abu Dhabi |
| Approval and monitoring of a new disinfection process or chemical (ozone, UV, chloramine, chlorine dioxide) and change control for chemicals and materials touching drinking water | Licensees changing treatment or dosing | Department of Energy, Abu Dhabi |
| Long-term water purchase agreement, performance and availability tests | Independent water project developers and their contractors | EWEC |
| Product conformity for regulated imported items such as motors, pumps and control panels | Skid and plant equipment | ECAS and EQM scheme, see the product conformity guide |
The Regulations treat the World Health Organization drinking water guidelines as the primary reference, require sampling to ISO 5667-5, and say that a reference to any standard means its current edition. Membrane plants carry an extra organic parameter table in the sampling schedule compared with thermal plants. Specific limits belong in the current text of the Regulations, so check the edition in force before writing a performance guarantee.
Choose from the owner's approved list first, then judge the bidder on references at the same feed type and size, guarantees on specific energy and product quality, and the local service base. A manufacturer or its authorised representative suits engineered plant; a stockist suits spare cartridges, small pumps and consumables.
If you want several offers at once, post your requirement with the feed analysis attached. For the wider purchasing routine, see the guide to sourcing industrial suppliers in the UAE and Saudi Arabia.
Price follows capacity, feed difficulty, intake and outfall civil works, the energy recovery choice and the metallurgy of the high-pressure side, where seawater duty pushes buyers to duplex or super duplex steels. Power connection and the remineralisation and storage scope often add as much as the membrane block itself.
Lead time is set by the long items: high-pressure pumps, energy recovery devices, membranes and vessels, and the approval cycle of the owner and the independent engineer. A containerised unit can be shipped in months where a utility plant takes years from award. Release the feed analysis and the datasheet early, because late changes to feed assumptions reopen the whole membrane design.