Melting furnaces in the UAE are induction, resistance and fuel-fired units that bring aluminium, copper, brass and other metals to molten state for casting and extrusion billet. This page explains the furnace types UAE foundries buy, the cooling, power and safety issues in Gulf conditions as of 2026, and what drives price and delivery.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified melting furnaces suppliers who quote for your order directly.
Tell us about melting furnaces in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
A melting furnace heats metal past its melting point and holds it molten at a controlled temperature until it is poured. It is the hot end of the wider group of industrial furnaces and ovens in the UAE, and it feeds the casting routes in casting and forging, including sand casting, die casting and investment casting. UAE buyers are aluminium and brass foundries, extrusion and billet plants, jewellery and bullion refiners, recycling yards and mould makers in Sharjah, Ajman, Dubai Industrial City and KIZAD.
Furnace type follows the metal, the batch size and the energy source. Inductotherm, a melting equipment maker whose product lines were reviewed for this page, lists melting furnaces such as heavy steel shell, small capacity steel shell, mini-melt, rollover and tilt-pour designs, plus coreless and channel holding furnaces, for metals including aluminium, brass, copper and gold. Nabertherm lists electrically heated or gas-fired tilting furnaces and bale-out furnaces for melting and holding.
| Furnace type | Typical UAE use | Key specification points |
|---|---|---|
| Coreless induction furnace | Copper, brass, bronze, iron and aluminium batches in foundries | Crucible capacity, power rating, frequency, cooling water circuit, tilt or lift-out design |
| Channel induction holding furnace | Holding large volumes of molten aluminium or copper alloy between melting and casting | Capacity, holding temperature, inductor life, lining |
| Electric resistance bale-out furnace | Aluminium and zinc melting or holding for die casting and small castings | Crucible size, element type, maximum temperature, ladle access |
| Gas-fired crucible or tilting furnace | Larger aluminium melts where gas is available | Burner type, flue gas route, recuperation, tilt mechanism |
| Portable holding furnace | Moving molten aluminium to a casting cell | Insulation, heat loss, transport frame, lifting points |
Melting is one step in a thermal line. Heat treating the castings afterwards is covered in heat treatment furnaces for metal parts, and ceramic or glass firing falls under kilns. Furnace linings are bought separately as refractory materials.
The biggest Gulf effect on a melting furnace is the cooling system and the electrical room, not the furnace shell. Induction power supplies reject heat to a water circuit, and with summer air temperatures high and humid the cooling plant needs spare capacity or the furnace derates.
Ask the maker for the cooling water flow and the maximum inlet temperature, then size the plant for the hottest day, not the average. Options include a closed circuit with an air cooler or a plate heat exchanger on a cooling tower or chiller. Use treated water to avoid scale in the coil, and keep a stand-by pump.
Melting furnaces are heavy electrical loads. Confirm the supply capacity, harmonics and power factor correction with the utility before ordering, and keep the transformer and power supply room cool and dust free. Dust from sand, fettling and grinding gets into electrical cabinets, so use filtered ventilation or a sealed, air conditioned room.
Moisture is a safety issue, not only a quality issue. Damp scrap, wet tools or a leak in a cooling line can cause a violent steam burst in molten metal. Store scrap under cover, preheat charge material where the process allows and train crews on wet scrap rules. Fume from melting should be captured, and the options are listed under dust collection systems.
No single UAE rule describes melting furnaces as a product. As of 2026 buyers specify international furnace safety standards in the contract, then check electrical, fire and environmental approvals for the plant with the relevant emirate authority.
| Requirement | Applies to | Authority or source |
|---|---|---|
| ISO 13577-1, general safety | Industrial furnaces and associated equipment in its scope, excluding blast furnaces, steel converters and boilers | ISO |
| EN ISO 13577-2:2023 | Combustion and fuel handling systems on fuel-fired melting furnaces | ISO and CEN |
| ECAS or EQM certificate | Electrical components where a MoIAT technical regulation applies | MoIAT, through a notified body |
| Civil Defence approval | Fuel storage and gas pipework, plus fire protection of the foundry | Emirate civil defence authority |
| Environmental permit | Stack emissions, fume and dross handling | Emirate environment authority such as Dubai Municipality or the Environment Agency Abu Dhabi |
The guide to ECAS and EQM conformity in the UAE sets out how certificates work, and the Civil Defence approval guide covers the fire side. Whichever standard applies, ask the supplier to name it in the offer and to supply the risk assessment file.
Choose on the metal and the batch, then check who provides the power supply, the lining and the after sales service in the UAE. A furnace is only as good as the lining crew and the spare coil that arrive when it fails.
Buying direct from the manufacturer suits larger induction furnaces, where the maker sizes the coil, power supply and cooling to your tonnage. An authorised distributor suits smaller electric and gas furnaces and stocks wear parts such as crucibles and elements. A stockist may sell second hand units, so ask for coil test results and the lining history. For control upgrades, Eurotherm is one maker of the temperature controllers fitted to holding furnaces, and the temperature controllers category lists others.
Before you ask for offers, write down the alloy, hourly melt rate, holding hours, available gas and power. Then post your requirement and compare responses, and use the guide to sourcing industrial suppliers for the checks to run on each.
Capacity, melt rate, energy source and the cooling and electrical package set the price, and custom induction systems take longer than catalogue crucible furnaces. Always compare offers on the same scope.
Make the delivery date, the commissioning scope and the first lining part of the written order.