Commercial laundry equipment in the UAE is the washer-extractors, tunnel washers, dryers, flatwork ironers, finishing lines, boilers and dosing systems used in hotel, hospital, labour accommodation and industrial laundries. This page helps UAE buyers choose capacity and heating, understand the Dubai Municipality laundry guideline and EN 14065 hygiene control, and compare suppliers on service and lead time.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified laundry equipment suppliers who quote for your order directly.
Tell us about laundry equipment in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Commercial laundry equipment is the machinery that washes, extracts, dries, presses and folds textiles at volumes far beyond household machines. In the UAE it is one of the four product lines under office and commercial furniture and equipment for UAE projects, because hotels, hospitals and accommodation blocks buy it on the same fit-out schedule as furniture and kitchens.
The UAE has a large hospitality and healthcare base, so linen is the main load: sheets, towels, table linen and uniforms from hotels, and gowns and sheets from clinics. Labour accommodation and airline or institutional catering add volume. Operators choose between running an on-premise laundry, buying equipment for a central laundry, or outsourcing to a laundry service, and the equipment decision depends on that choice.
| Equipment type | Typical UAE use | Key specification points |
|---|---|---|
| Washer-extractors (barrier or open pocket) | Hotel on-premise laundries, clinics, small commercial laundries | Drum capacity in kg, extraction G-force, heating (electric, steam, gas), programmable dosing inputs |
| Tunnel washer lines with presses | Central hotel and hospital laundries running several tonnes a day | Kg per hour, number of modules, water reuse between modules, press moisture |
| Tumble dryers | Towels, uniforms and bed linen | Capacity, heating source, exhaust duct size, lint filtration, drying time |
| Flatwork ironers and folders | Bed sheets, table linen and duvet covers | Roll width, speed, heating, feeding and folding automation |
| Steam boilers and thermal oil heaters | Central laundries with steam machines and ironers | Steam pressure and output, fuel, water treatment, annual inspection |
| Chemical dosing and water systems | All laundries | Pump capacity, chemical programme, water softening, drain heat recovery |
Related lines are commercial kitchen equipment and hospitality furniture, which a hotel buys in the same package, and textiles and uniforms for the linen itself. Garment and fabric manufacturing machines are another category, textile machinery, and are not what a laundry uses.
In Dubai, the Dubai Municipality Health and Safety Department publishes a technical guideline for laundry facilities, and laundries serving healthcare or hotels usually add EN 14065 hygiene control. The table sets out what to check, as of 2026, and other emirates apply their own authority rules.
| Requirement | Applies to | Set or checked by |
|---|---|---|
| Technical guideline for compliance of laundry facilities (document DM-HSD-GU76-LRA2, version 5) | Laundry shops and related activities in the Emirate of Dubai | Dubai Municipality, Health and Safety Department |
| Annual inspection of boilers and pressure vessels by a qualified technician approved by EIAC | Steam boilers feeding ironers and machines | Dubai Municipality guideline |
| Wash contaminated textiles at no less than 71 degrees Celsius for 25 minutes, or use approved chemicals at lower temperatures | Hot wash cycles for contaminated textiles | Dubai Municipality guideline |
| EN 14065 (biocontamination control, RABC) | Laundries processing healthcare or hospitality textiles under a hygiene system | Certification bodies and the client |
| Conformity certificate for regulated electrical products | Electrical machines on the regulated list | MoIAT (ECAS or the Emirates Quality Mark) |
The version 5 guideline, which carries a 2026 issue date, applies to laundry shops and related activities in Dubai. It asks for insulated steam and hot water pipes, secured machine moving parts, drainage openings covered with mesh and a safe way of disposing of wastewater. It also sets the 71 degree, 25 minute wash for contaminated textiles and, for lower temperature cycles, chemicals approved by the relevant authorities. It does not list machine models, so use it as the compliance frame for equipment layout and chemical choice.
EN 14065 describes a risk management approach called Risk Analysis and Biocontamination Control for laundry processed textiles. It covers microbiological quality and excludes worker safety and sterility of the final product. Sources disagree on whether a revision was published, so check CEN or your national body for the current edition. Clients such as hospitals may ask for it by name, which drives choices such as separate clean and soiled flow, barrier washers and validated temperatures.
For electrical machines, read the guide to ECAS and EQM product conformity in the UAE and check whether your model is on the regulated list.
Laundry rooms in the UAE are hot and humid by design, so ventilation, heat recovery and exhaust duct design decide how comfortable the room is and how long the equipment lasts. Dryers need clear exhaust ducts and lint filters; blocked ducts raise drying time and fire risk. Boilers and ironers add heat, so plan make-up air and spot cooling for staff.
Water quality is the second factor. Hard or mineral-rich water leaves scale on heating elements and in steam boilers, makes detergent less effective and leaves linen harsh, so ask the supplier for water softening and a boiler water treatment programme. Water cost and discharge rules push buyers towards machines that reuse rinse water and recover heat from drain water.
Chemicals matter as much as machines. A laundry programme is a set of detergent, alkali, bleach, sour and softener steps tuned to the water, the machine and the linen. Ecolab publishes hotel laundry programmes in liquid and solid forms and a low-temperature Aquanomic programme aimed at cutting water and energy use. Diversey lists Clax professional laundry chemicals with dosing systems, and Evans Vanodine lists laundry products among its hygiene ranges. For wider supplies see cleaning chemicals and supplies.
Supply comes from dealers for international machine makers, importers of Asian and Turkish ranges, and laundry planners who design the plant and supply the machines. Choose on service first: a laundry that stops cannot clean hotel linen, so look for a dealer with spare parts in the UAE, a response time in writing and technicians trained by the maker.
The general method for checking a supplier is in the guide to sourcing industrial suppliers in the UAE and Saudi Arabia.
Price follows capacity, automation and heating type, and lead time follows whether the machine is stocked in the UAE. No prices are quoted here because they vary by specification.
To compare dealers, post your laundry requirement with daily linen weight and the services available.
Plan the flow of linen before choosing machines. Soiled linen arrives at a sorting area, moves through washing, extraction, drying or ironing, then to folding and storage, and clean and soiled textiles should never cross paths. Hospitals and some hotel clients expect a physical barrier between the soiled and clean sides, usually with barrier washers that load from one room and unload into the other.
Services drive the floor plan. Steam lines, floor drains with enough fall, three-phase power, compressed air for presses and large exhaust ducts all need space, and a laundry built into a basement or podium level of a hotel must also allow for the weight of the machines, vibration from extractors and noise. Ask the supplier for a foundation and services drawing, including loads per machine, and give it to the structural and MEP engineers before concrete is poured.
Finally, think about growth. A hotel laundry that serves a single tower today may need to take linen from a second property, so leave floor space and utility capacity for another washer and dryer. Adding a machine later is far cheaper than moving the walls.