Jib cranes in the UAE are slewing arm cranes fixed to a pillar, wall or column that lift loads within a circular or semi-circular area at a workstation, machine or loading point. This page explains the types, what to specify, how heat and coastal air affect them, and how to compare suppliers.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified jib cranes suppliers who quote for your order directly.
Tell us about jib cranes in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
What to specify when buying an overhead EOT crane in the UAE or Saudi Arabia, from girder type and duty class to heat ratings, third-party inspection and spares.
A jib crane has a horizontal arm, the jib, that swings round a fixed support and carries a hoist and trolley along it. It is a light local lifting aid, and it sits in lifting equipment for UAE workshops, yards and plants between a hand hoist and a full runway crane. Where the load must travel along a bay, a overhead crane or gantry crane is the better fit.
Demag lists pillar-mounted slewing jibs (270 or 300 degrees), pillar-mounted slewing cranes (up to 360 degrees) and wall-mounted jibs (180 or 360 degrees). Konecranes lists pillar-mounted and wall-mounted jib cranes up to 2,000 kg, with a 300 degree slew for the pillar version and 270 degrees for the wall version. The table summarises what buyers order.
| Type | Typical UAE use | What to specify |
|---|---|---|
| Pillar or floor-mounted jib | Machine shops, assembly cells and open loading points with a concrete floor | Capacity, outreach, hook height, slew angle, floor thickness and anchor design |
| Wall-mounted jib | Bays where floor space is needed, such as along a workshop wall | Wall or column strength, bracket type, slew range, hoist type |
| Wall-travelling jib | Long wall runs where the jib must move along a rail | Rail length, load on the wall, drive type |
| Mobile or base-mounted jib | Occasional lifting at changing positions | Base weight, counterweight, stability on the floor |
| Outdoor-rated jib | Yards, jetties and open loading bays | Weather protection, coating, wind rating, power supply route |
The hoist matters as much as the arm. Both makers list electric chain hoists, and Konecranes also lists manual hoists and air balancers. For choosing one, see electric hoists and chain hoists and winches.
Specify capacity, outreach, lifting height and slew angle, then check the structure that will carry it. Demag gives KBK jib capacity up to 1,000 kg on its pillar jib and up to 5,000 kg for electric chain hoist jibs overall, with I-profile beam jibs up to 10,000 kg and outreach up to 12 m. Most workshop jibs are far smaller.
Our overhead crane buying guide explains duty classification and ambient ratings that apply to the hoist on a jib as well.
A jib crane used outdoors or in an uninsulated shed meets the full UAE summer. Konecranes states an ambient range of minus 20 to 70 degrees Celsius for the steel structure of its jibs, and notes that other components, such as some hoist types, have narrower limits. Hoist, brake and control gear are the parts to check, not the steel.
Ask for written confirmation of the hoist's rated ambient and duty class at the temperature at hook level. Pendant cables, limit switches and plastic parts degrade in sun, so request UV-resistant cabling and shaded pendants outdoors.
Dust and sand foul chain, rollers and bearings. Ask for a lubricant suited to dusty sites and a cleaning interval in the manual.
On Jebel Ali, Khalifa Port and Hamriyah sites, specify a coating system suited to salt air. Demag lists weather protection accessories for outdoor installation, which is the kind of option to ask about.
A jib crane is lifting equipment and needs periodic thorough examination by a competent person in the UAE. The emirate sets the rule and the interval: our lifting equipment page sets out the Dubai Municipality and Sharjah requirements as checked in October 2026. For comparison, the UK's HSE guidance, which Sharjah's code follows in structure, sets 12 months for lifting equipment generally and 6 months for lifting accessories and people lifting unless an examination scheme says otherwise.
| Requirement | Applies to | Authority |
|---|---|---|
| Thorough examination and certification by an accredited third party | Jib cranes and hoists in Dubai workplaces | Dubai Municipality (see lifting equipment page) |
| Third-party examination before first use and at set intervals | Lifting equipment in Sharjah | Sharjah Prevention and Safety Authority |
| Operator and rigger competence | Anyone using the jib | Employer and emirate rules |
| Rated load marking and manufacturer documentation | Every jib crane | Manufacturer and supplier |
Ask the supplier whether the quote includes the first examination and certificate, and what records come with the crane.
Jib cranes come from global crane makers and from regional fabricators. Among the brands listed with us, Demag offers the KBK and D-series pillar and wall jibs described above, and Konecranes lists pillar and wall-mounted jib cranes up to 2,000 kg. Local fabricators build bespoke jibs for heavier or unusual duties.
A manufacturer-direct order gives the full range and engineering, an authorised distributor installs and services locally, and a fabricator offers custom size and speed. Whichever you choose, ask for the load test certificate, the foundation drawing and the service contact. Post your requirement with load, outreach, hook height and site details to compare quotes. Related lifting gear includes lifting magnets and slings and shackles.
Price follows capacity, outreach, hoist type, slew drive, outdoor protection and installation. Standard catalogue jibs ship faster than special spans or heavy duty types. Foundation work, power supply and examination add to cost and to the programme, so ask the supplier to separate them in the quote.
A jib crane is simple to run but it is still lifting equipment, so installation, a load test and a routine check belong in the purchase. Plan them before the order, not after delivery.
Keep the manufacturer's manual, the test certificate and the examination reports in one file at the site. If you relocate a jib, re-test it after installation in the new position.