Flotation cells in the UAE are the agitated tanks and columns that separate valuable minerals from gangue by attaching air bubbles to treated particles in a water slurry. This page explains the cell types, what UAE buyers should specify for heat, water and reagents, which approvals apply, and how to compare suppliers before you post a requirement.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified flotation cells suppliers who quote for your order directly.
Tell us about flotation cells in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
A flotation cell is a tank or column in which finely ground ore, mixed with water and reagents, is aerated so that hydrophobic mineral particles rise on air bubbles as froth while the rest stays behind as tailings. It is one step in the mineral processing equipment range for the UAE, and it only makes sense after the feed has been reduced to a fine size, typically by grinding mills and ball mills.
The cell type follows the duty. Mechanical cells use an impeller and diffuser to mix the pulp and disperse air, and give higher throughput with a lower grade concentrate. Columns feed air through spargers at the bottom while slurry enters from above, which gives lower throughput but cleaner concentrate. Jameson cells use neither impellers nor spargers and mix slurry and air in a downcomer under high shear, which suits fine particles.
| Cell type | Typical duty | Specification points |
|---|---|---|
| Mechanical tank cells | Rougher and scavenger banks on sulphide, phosphate or industrial mineral circuits | Cell volume, number of cells in series, rotor and stator wear parts, air blower, launder design |
| Conventional (open) cells | Smaller plants and cleaner stages | Metso lists its conventional OK cells from 0.5 to 38 cubic metres, used as roughers, scavengers or cleaners |
| Flotation columns | Cleaner stages where grade matters more than tonnage | Column height and diameter, sparger type, wash water, level control |
| Jameson cells | Fine particle recovery and cleaning | Downcomer count, feed pump head, air entrainment |
| Dissolved air flotation units | Not an ore duty: oil, grease and solids removal from water | Hydraulic loading, saturator, recycle pump, skimmer |
Ore flotation is a small part of UAE processing, because most local mineral work is dry crushing and grinding of limestone, gypsum and aggregates. Cell purchases are usually project driven: an engineering firm in Dubai or Abu Dhabi specifying a plant for a client abroad, a pilot plant or a lab, or an industrial mineral producer that needs to remove an impurity.
The flotation you will actually see in the Emirates is mostly in water. One public record notes that the Fujairah F1 independent water and power plant uses dissolved air flotation and dual media filtration to pre-treat its raw water, which is a separate duty with separate suppliers. If your enquiry is for oily water or effluent, start with wastewater treatment equipment and industrial effluent treatment; EDUR lists multiphase pumps for dissolved air flotation systems.
Water quality and ambient temperature matter more than anything else on a Gulf flotation datasheet. Flotation reagents react to the ions in the process water, so desalinated, groundwater and treated effluent supplies can behave differently. Share a full water analysis with the cell and reagent suppliers before sizing.
There is no single UAE standard for flotation cells. Compliance comes from the site and from the electrical and mechanical items supplied with the machine. As of 2026, the table below is a checklist of what to confirm with the authority and the supplier, not a legal opinion.
| Requirement | Applies to | Authority |
|---|---|---|
| Environmental licence and guidelines for crusher and quarry sites | Sites where ore or stone is crushed and ground before flotation | Federal environment ministry and the local environmental authority |
| Conformity for regulated electrical products (control panels, motors) | Items supplied with the cell bank | MoIAT, with ECAS or EQM certificates where listed |
| Reagent handling and storage | Collectors, frothers and pH modifiers | Emirate civil defence and environmental authority, per site |
| Tailings practice (voluntary) | Projects whose owners adopt the Global Industry Standard on Tailings Management | ICMM, UNEP and PRI |
One overview of the UAE regime notes that mining and quarrying are governed by federal instruments, with an environmental licence from the relevant local authority, and that the overview dates from 2018, so confirm the current position with the authority. For electrical conformity read the guide to ECAS and EQM product conformity in the UAE.
Froth flotation grinds the ore to roughly 2 to 500 micrometres, mixes it with water into a pulp, conditions it with reagents, and aerates it so target particles ride bubbles into a froth. The sequence in a plant is:
Collectors, frothers and depressants are chosen per ore. Xanthates are common collectors for sulphides, while fatty acids and amines serve oxides and salts. Too unstable a froth drops particles, and too stable a froth is hard to pump and dewater.
Choose on test work and wear parts, not on cell volume alone. A cell supplier should ask for ore characterisation and bench flotation results, then size the bank from them. Cells are normally built to order by the original maker or an engineering contractor and shipped to Jebel Ali or Khalifa Port. The slurry that feeds the cells moves on abrasion rated pumps: ITT Goulds Pumps, Ruhrpumpen and Tsurumi each list slurry or agitator pump lines in their ranges.
Compare quotations on: rotor and stator material and expected life, air requirement per cell, launder arrangement for froth removal, instrumentation for level and air control, spares package, and commissioning support. If your process also needs the dissolving of values, see leaching equipment; if density separation can do the job without reagents, compare gravity separation equipment. Use the guide to sourcing industrial suppliers in the UAE and Saudi Arabia to check distributor authority.
Price follows total cell volume, material of construction, the number of cells and the control package. Lead time follows whether the cells are standard catalogue units or built to a specific bank layout, and whether the frame, launders and air system come in one package. Vendors publish ranges rather than prices: one maker lists tank cell capacities from 0.17 to 300 cubic metres, which shows how wide the spread is. Ask for a written lead time that includes shipping and installation supervision, and post your requirement through post your requirement to compare quotes.
Related equipment in the same circuit includes magnetic separators for iron removal before flotation.