Skip to main content

Fertigation Systems Suppliers, UAE

Fertigation systems in the UAE inject dissolved fertiliser, acid and other liquid additives into irrigation water so greenhouses, hydroponic farms, date palm blocks and landscapes feed crops through the drip line. This page compares injector types, explains EC and pH control on UAE water, covers backflow protection and the standards that apply as of 2026, and shows what to ask UAE fertigation suppliers about design, price and lead time.

0 suppliers found

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Post your requirement, get quotes from multiple suppliers

Tell us about fertigation systems in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

What are fertigation systems and what types are sold in the UAE?

A fertigation system is the equipment that meters liquid fertiliser from stock tanks into irrigation water at a set ratio or concentration, so nutrients reach the roots with every irrigation. It is part of the head unit in UAE irrigation systems and matters most where water is scarce and crops are high value: greenhouse cucumbers and tomatoes, hydroponic leafy greens in Abu Dhabi and Dubai, and date palms on drip.

Injectors work on two principles. Venturi injectors use a pressure difference across a constriction to suck stock solution into the line, while positive displacement injectors push a measured volume of stock into the water. A University of Georgia extension bulletin describes positive displacement units as the industry standard because they hold a set ratio over wide swings in water pressure.

Injector typeTypical UAE useKey specification
Venturi injectorSmall farms, villa landscapes, low cost drip blocksRequired pressure differential, suction rate, head loss in the main line, ISO 15873
Water powered proportional injectorNet houses and nurseries without power at the valveFlow range, injection ratio range, chemical resistance of seals
Electric dosing pump (diaphragm or piston)Farms that inject acid or chlorine as well as fertiliserFlow at line pressure, material compatibility, control signal input
Computerised fertigation unitCommercial greenhouses and hydroponic farmsNumber of channels, EC and pH sensors, recipe control, mixing loop

Fertigation feeds the crop through emitters, so it is designed together with drip irrigation laterals and filters. In soilless production it sits at the heart of hydroponic systems, and the fertilisers themselves come from fertiliser suppliers; only fully water-soluble grades suit injection.

How do you choose a fertigation system for UAE water and heat?

For UAE growers, choose a fertigation system that controls final EC and pH rather than only the injection ratio, because desalinated, brackish and recycled water start from very different chemistry. Then protect the system against heat, corrosion and precipitation in the tanks.

Start from the water analysis

Desalinated water is low in salts and needs most nutrients added, while brackish well water already carries sodium, chloride and bicarbonate that limit how much fertiliser can be added before salinity becomes a problem. FAO Irrigation and Drainage Paper 29 explains how salinity, specific ions and bicarbonate affect crops and clog drip systems. Acid injection to lower pH and bicarbonate is common on UAE well water, so the injector must handle acid as well as fertiliser.

Recycled water

Where a farm or landscape in Abu Dhabi uses recycled water, the Department of Energy's P1 and P2 classes set limits on solids and salinity, and the water already contains some nutrients. Measure before dosing so the program does not overfeed, and place fine filtration downstream of injection as well as upstream, since mixing can precipitate solids.

Heat, sun and corrosion

Stock tanks left in the sun warm quickly, which speeds algae growth in some solutions and stresses plastics. Shade tanks, choose UV-stable HDPE or polyethylene, and check pump heads, seals and fittings for resistance to the acids and fertilisers used. Keep separate tanks for products that react, such as calcium nitrate and sulphates or phosphates, to avoid precipitates that block emitters.

Control and monitoring

Inline EC and pH probes show whether the injector is delivering what the program says. Probes drift and need cleaning and calibration, so handheld meters such as HM Digital EC, TDS and pH testers are a useful cross-check. In soil, Irrometer soil solution extractors and tensiometers help growers see salinity and moisture in the root zone.

Which standards and approvals apply to fertigation systems in the UAE?

As of 2026, fertigation equipment in the UAE is specified to international standards, while the two compliance questions buyers face are protecting the water supply from backflow and confirming that the fertiliser products are approved for sale.

RequirementApplies toAuthority or reference
ISO 15873:2002Construction, operation and test methods for Venturi liquid additive injectorsISO
Backflow protectionAny injection point connected to a well or public supplyLocal water and electricity utility rules; owner specification
Fertiliser product approvalFertilisers and soil conditioners sold and used in the UAEMinistry of Climate Change and Environment (MOCCAE)
Recycled water classes P1 and P2Treated effluent used for irrigation in Abu DhabiDepartment of Energy, Abu Dhabi
ECAS or EQM conformityElectric dosing pumps and control panels where a MoIAT regulation appliesMoIAT

ISO 15873 states that it does not cover backflow prevention, leaving that to water protection rules, so specify a check valve on the injection line and a backflow assembly between the source and the injection point. Confirm product registration for imported fertilisers with MOCCAE before ordering. The ECAS and EQM guide explains how to check whether an electric dosing pump or control panel needs a MoIAT certificate.

How do you choose a fertigation supplier in the UAE?

Choose a UAE supplier that sizes the injector to your actual flow and pressure range, supplies the backflow and filtration parts with it, and can service probes and pump heads locally. Ask for a schematic before you buy.

  • Ask for the injection rate at your minimum and maximum irrigation flow, and the pressure loss the injector adds to the line.
  • Check chemical compatibility of seals, diaphragms and tanks for every product you plan to inject, including acid.
  • Ask for a 140 to 200 mesh filter upstream of the injector, as the UGA bulletin recommends, and a disc or screen filter downstream; SATI automatic disc and screen filters are one option for the head unit.
  • Confirm the drip laterals can deliver nutrients evenly; pressure compensating lines such as Fitco PC drip laterals help on long runs.
  • Link the unit to irrigation controllers that start dosing by valve or recipe and to the irrigation pump so injection stops when the pump stops.

Greenhouse fertigation is often bought with greenhouse climate control from one integrator. For quotes from several UAE suppliers, post your requirement with the crop, area, flow rate and water analysis.

What drives the price and lead time of fertigation systems in the UAE?

Fertigation price in the UAE rises with the level of control. A single venturi on a small block costs little; water powered proportional injectors cost more but hold a ratio; multi-channel computerised units with EC and pH control, mixing tanks and software sit at the top. Acid channels, stainless or special plastic wetted parts and redundant probes add cost.

Venturi injectors, proportional injectors and basic dosing pumps are usually in UAE stock. Computerised greenhouse units are often built to order abroad and shipped through Jebel Ali, then commissioned on site with the grower's recipes, so allow time for programming and staff training.

Sources

Frequently Asked Questions — Fertigation Systems

What is a fertigation system used for in the UAE?
A fertigation system in the UAE injects dissolved fertiliser, and often acid, into irrigation water so nutrients reach the roots through drip or hydroponic lines. It is used most in greenhouses, hydroponic farms, date palm blocks and landscapes where water is scarce and precise feeding matters.
Venturi or dosing pump: which fertigation injector suits a UAE farm?
A venturi injector is cheap and has no moving parts but needs a pressure differential and gives a less precise ratio. A proportional injector or electric dosing pump holds a set ratio over changing pressure and suits UAE greenhouses and larger farms that also inject acid.
Which standard covers fertigation injectors in the UAE?
Venturi-type liquid additive injectors used for fertigation in the UAE can be specified to ISO 15873:2002, which covers construction, operation and test methods. It excludes backflow prevention, so UAE buyers should specify check valves and backflow devices separately.
Why do UAE growers control EC and pH in fertigation?
UAE irrigation water ranges from low-salt desalinated water to brackish wells and recycled water. Controlling the final EC and pH of the nutrient solution, rather than only the injection ratio, prevents overfeeding and salt stress and keeps bicarbonate from forming scale in emitters.
Do fertilisers used for fertigation need approval in the UAE?
Fertilisers and soil conditioners sold and used in the UAE fall under the Ministry of Climate Change and Environment. As of 2026, confirm with MOCCAE or your supplier that the water-soluble fertilisers you plan to inject are registered before you import or buy them.
How long does a fertigation system take to supply in the UAE?
Venturi and proportional injectors and simple dosing pumps are usually available from UAE stock. Computerised fertigation units for greenhouses are often built to order abroad and shipped through Jebel Ali, then need on-site commissioning, recipe programming and operator training.