Casing & Tubing Suppliers, UAE

Casing & Tubing are the steel pipes installed in oil and gas wells to provide structural integrity, isolate formations, contain well pressure, and serve as the conduit for production. Casing lines the drilled hole, while tubing hangs inside the casing to carry produced fluids to surface. In the GCC, where wells routinely reach depths of 10,000 to 18,000 feet with high pressures and corrosive fluids, casing and tubing selection is a critical engineering and procurement decision.

0 suppliers found

Active:Distributor API ASME Clear all

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Request Quotes Clear all filters

Post your requirement, get quotes from multiple suppliers

Tell us about casing & tubing in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

Casing and tubing are the largest consumable materials by volume and cost in any drilling program across the UAE and Saudi Arabia. Every well requires multiple casing strings — conductor, surface, intermediate, and production casing — sized and graded to match the well's depth, pressure, and corrosion environment. Production tubing is then installed inside the production casing to convey hydrocarbons to the surface.

Casing and tubing are manufactured to API 5CT specifications and classified by outside diameter (4.5-inch to 20-inch for casing; 2-3/8 inch to 5.5-inch for tubing), wall thickness, steel grade (J55 to Q125 and proprietary high-alloy grades), and connection type (API buttress, premium gas-tight connections). For GCC wells with H2S and CO2 exposure, 13Cr, Super 13Cr, or 25Cr duplex stainless steel grades are commonly required to prevent corrosion-related failures.

Procurement managers should evaluate compliance with API 5CT and API 5CRA (for corrosion-resistant alloys), verify full material traceability and third-party inspection certificates, and confirm that threading meets the specified premium connection requirements. Lead times for standard carbon steel OCTG range from 8-16 weeks, while corrosion-resistant alloys (CRA) can require 16-30 weeks depending on grade and availability. The GCC is served by major OCTG suppliers including Tenaris, Vallourec, Nippon Steel, and TMK, all of whom maintain regional stockholding in Jebel Ali, Dammam, and Jubail. Establishing call-off agreements against regional inventory can reduce delivery time to 1-2 weeks for standard items.

Frequently Asked Questions — Casing & Tubing

How do I determine the correct casing and tubing grades for GCC wells?

Grade selection depends on well depth (collapse and burst pressure requirements), temperature, and corrosive gas content (H2S and CO2). Standard carbon steel grades (L80, P110) suit sweet service wells. Wells with H2S require NACE-compliant grades, and those with CO2 corrosion require 13Cr or higher alloys. The well's casing design program specifies the exact requirements.

What premium connections are commonly specified in the GCC?

ADNOC and Aramco commonly specify premium gas-tight connections such as Tenaris Blue, Vallourec VAM, and NOV XT for critical casing and tubing strings. These connections provide metal-to-metal sealing, higher torque capacity, and better fatigue resistance than standard API connections. The choice depends on the operator's approved connection list and well conditions.

What are typical lead times for CRA casing and tubing?

Corrosion-resistant alloy (CRA) OCTG such as 13Cr, Super 13Cr, and 25Cr duplex typically requires 16-30 weeks from order to delivery, depending on grade, size, and mill production schedules. For critical-path items, buyers should place orders during the well planning phase and consider maintaining safety stock at regional warehouses.

How should casing and tubing be stored in GCC conditions?

OCTG should be stored on racks with end protectors installed, protected from direct sand and dust exposure, and regularly inspected for corrosion, especially on connection threads. In GCC heat, thread compound drying can occur, requiring reapplication before running. CRA materials need separation from carbon steel to prevent galvanic corrosion and contamination. Follow API RP 5C1 storage guidelines.