Automatic sliding doors in the UAE are power operated pedestrian entrances, linear, telescopic, curved or hermetic, used at mall, hospital, airport, metro and office entrances. This page explains the types, the EN 16361 and EN 16005 standards consultants name, escape route and break-out questions for civil defence, how heat, sand and constant traffic affect operators, the brands carried, and what drives cost, lead time and the service contract.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified automatic sliding doors suppliers who quote for your order directly.
Tell us about automatic sliding doors in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
An automatic sliding door is a glazed or solid leaf moved sideways by an overhead operator when a sensor detects a person. It is one of the families on our UAE doors and windows hub, and it differs from the rest of that family in one way that matters for buying: it is a machine, so the operator, sensors, safety functions and the maintenance contract matter as much as the frame and glass. In the UAE these doors run almost continuously at malls in Dubai and Abu Dhabi, hospital entrances, airport terminals, metro stations and hotel lobbies, where they also hold back hot air from conditioned space. Rules below were checked in October 2026.
UAE projects choose between five main configurations, set by the clear opening needed, the space beside the opening and whether the room must be sealed.
| Type | Where it is used | Key specification points |
|---|---|---|
| Linear bi-parting or single slide | Shop and mall entrances, office lobbies, clinics | Clear opening width, leaf weight, operator duty, sensor type |
| Telescopic sliding (two or more leaves per side) | Openings with little side space, hospital corridors, airport gates | Clear width against wall space, leaf count, speed |
| Curved and circular sliding | Hotel and mall feature entrances, airlocks | Radius, glass bending, wind and air pressure difference |
| Break-out (escape route) sliding | Entrances that are also exits on the evacuation plan | Break-out panels or leaves, fail-safe behaviour on fire alarm or power loss |
| Hermetic sliding doors | Operating theatres, isolation rooms, laboratories and cleanrooms | Air tightness, seal method, hygienic finish, radiation lining where needed |
Main entrances often combine a sliding door with a revolving door or a two door vestibule to reduce air loss. Where the opening is in a fire compartment wall the door may also need a fire rating, in which case it is bought as a fire tested assembly with its own certificate, as covered on our page on fire rated doorsets for UAE buildings. For warehouses and loading bays, the right product is an industrial door or industrial roller shutter or high speed door, not a pedestrian sliding door.
UAE consultants mostly name the European pair: EN 16361 for the door as a product and EN 16005 for safety in use. US designed projects name the ANSI/BHMA A156 series instead. There is no UAE wide product approval for a standard automatic sliding door as of 2026, but civil defence reviews doors that sit on escape routes or in fire walls.
| Standard or rule | What it covers | Source or authority |
|---|---|---|
| EN 16361 | Product standard for power operated pedestrian doors other than swing type; EN 14351-1 explicitly excludes these doors | CEN, named in consultant specifications |
| EN 16005 (current edition EN 16005:2023+A1:2024) | Safety in use of power operated sliding, swing, revolving and folding pedestrian doorsets, including doors on escape routes and fire or smoke doors | CEN Technical Committee 33 |
| EN 16034 | Fire resistance and smoke control, added to EN 16361 when the automatic door is fire rated | CEN |
| DIN 18650 | German standard for automatic door systems that several makers use for escape route approval | DIN, cited in manufacturer approvals |
| UAE Fire and Life Safety Code | Exit doors, fire doors and their release on alarm | UAE Civil Defence, applied by each emirate's civil defence authority |
EN 16005 is risk based. A Building Design CPD article on the standard explains that sliding doors are protected by sensors and pocket screens, that the minimum activation distance on escape routes was raised to 1,500 mm so doors open earlier for people moving fast, and that a logbook should be kept by the building owner and completed at each service. Ask the supplier for the risk assessment and logbook at handover, not only the CE declaration.
If the entrance is also a fire exit, the door has to let people out when power or the sensors fail. Manufacturers handle this with break-out leaves and side screens that swing open by hand, or with redundant drives and monitored sensors. dormakaba, for example, states that its SST sliding door profile is approved for emergency exits and escape routes under DIN 18650 and the German AutSchR guideline, and that break-out hinges let the full door width be used. The approach civil defence accepts depends on the emirate and building type, so get the exit door function agreed with the fire consultant and the authority before the door is ordered.
Constant cycling, sand and heat are what wear automatic doors in the UAE. Size the operator for the real traffic, protect the track and sensors from sand, and plan maintenance around the opening hours.
Automatic sliding doors in the UAE are supplied by the regional offices or authorised partners of international door makers, who import the operator and usually assemble the leaves locally with glass from a UAE processor. The authorised partner also holds the spare parts and trained technicians, which is why the brand choice is really a service choice.
Brands carried here include dormakaba automatic sliding and telescopic doors, GEZE sliding door operators, record (agta record) sliding, telescopic and curved doors, ASSA ABLOY entrance systems, TORMAX drives, Manusa automatic and hermetic hospital doors, Gilgen Door Systems, Boon Edam entrances, NABCO Entrances and STANLEY Access Technologies.
Ask every bidder for the operator model and its test evidence, the escape route configuration and how it will be approved, sensor models, the local stock of spare drives and controllers, response times written into the maintenance contract, and the number of trained technicians in the emirate. Our guide to sourcing suppliers in the UAE and Saudi Arabia covers the broader checks. To compare offers on the same door schedule, post your automatic door requirement with opening sizes, traffic and location.
The operator type, the glass and the escape route function set the price, and lead time depends on whether the operator is in regional stock.