Aluminum Doors & Windows Suppliers, UAE

Aluminum Doors & Windows are extruded aluminium-framed fenestration systems used throughout GCC residential, commercial, and industrial buildings. Thermally broken aluminum profiles are now standard in the Gulf to comply with energy codes requiring low U-value window assemblies. The UAE and Saudi Arabia have a large and competitive aluminium window fabrication industry served by both regional extruders and international system suppliers.

0 suppliers found

Active:API Clear all

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Request Quotes Clear all filters

Post your requirement, get quotes from multiple suppliers

Tell us about aluminum doors & windows in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

Aluminum doors and windows are fabricated from extruded aluminium alloy profiles (typically 6063-T5 or 6060-T6) with powder-coated, anodised, or wood-effect finishes. Modern systems feature thermal break technology — polyamide strips separating inner and outer aluminium sections — to minimise heat conduction through the frame and meet GCC energy codes. System types include casement, sliding, tilt-and-turn, folding, and pivot configurations for both doors and windows.

In the UAE and Saudi Arabia, aluminium fenestration must comply with thermal performance requirements specified by Estidama (Abu Dhabi), Al Sa'fat (Dubai), and SBC 601 (Saudi Arabia). Typical specifications include frame U-value, glazing U-value and SHGC, air infiltration rate, water penetration resistance, and wind load resistance. Double-glazed insulated glass units with low-e coatings are standard; triple glazing is emerging in ultra-high-performance projects.

The GCC aluminium fenestration market is served by system suppliers including Schuco, Technal, Reynaers, SAPA (Hydro), and regional extrusion companies such as Gulf Extrusions and Balexco. Fabrication is performed by hundreds of local workshops ranging from small joinery operations to large automated factories. Procurement managers should verify that the fabricator holds the system supplier's licence, uses genuine profiles and hardware, and has the testing certifications to confirm performance claims. For large projects, sample testing of fabricated units per BS EN 14351-1 or AAMA/NFRC standards is recommended before full production.

Frequently Asked Questions — Aluminum Doors & Windows

Why are thermally broken aluminium profiles important in the GCC?

Thermally broken profiles significantly reduce heat transfer through the window frame, which can account for 20 to 30 percent of total window heat gain. In the Gulf's extreme climate, this translates to measurable cooling energy savings. Abu Dhabi and Dubai energy codes now mandate thermal break frames for most building types, making non-thermally-broken systems obsolete for new construction.

What finish options are available for aluminium windows in the UAE?

Powder coating is the most common finish, available in any RAL colour with 15 to 25 year durability warranties. Anodised finishes (natural silver, bronze, or black) offer excellent abrasion resistance for high-traffic areas. Wood-effect sublimation coatings replicate timber aesthetics on aluminium profiles and are popular in GCC villa and hospitality projects.

How do I verify the quality of aluminium window fabrication?

Request evidence that the fabricator is licensed by the profile system supplier, inspect sample corner joints for clean mitre cuts and proper crimping or welding, verify hardware installation quality, and commission performance testing of a representative sample unit at an accredited laboratory. DCGL approval is required for Dubai projects, and SASO certification for Saudi Arabia.