Third party inspection in the UAE is independent checking, by a company that is neither buyer nor seller, that equipment and works meet the purchase order and code before shipment or acceptance. This page explains the inspection and test plan, hold and witness points, EIAC accreditation, API source inspector certificates, who should appoint the inspector and what drives cost.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified third party inspection suppliers who quote for your order directly.
Tell us about third party inspection in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
How welder certification works on UAE and Saudi projects: WPS, PQR and WQTR, which code applies, what the test involves, 1G to 6G positions, how long qualifications last, AWS and CSWIP, and third-party witnessing.
Third party inspection (TPI) is the independent review, witnessing and verification of materials, equipment and construction work against the contract, specification and code. In the UAE it belongs to inspection and testing for UAE industry and is bought by owners, EPC contractors and traders, at home and at manufacturers abroad.
TÜV's description of a call-off contract for a marine operating company in Abu Dhabi shows the usual scope: document review of criteria, standards, codes and procedures; inspection and test activities during procurement of new equipment and materials; inspections at manufacturers' mills and factories; construction and installation monitoring; and quality assurance verification certificates for materials and equipment from manufacturer sites worldwide.
| Type of TPI | Where it happens | What the inspector does |
|---|---|---|
| Vendor (shop) inspection | Manufacturer or fabricator, local or overseas | Reviews certificates, witnesses tests, checks dimensions and release for shipment |
| Pre-shipment inspection | Factory or warehouse before dispatch | Verifies quantity, quality, marking and packing against the order |
| Factory acceptance test (FAT) witnessing | Manufacturer's test bay | Observes performance and functional tests against the agreed procedure |
| Construction and installation inspection | Project site | Monitors work, checks records and reports non-conformances |
| Receipt inspection | Port, yard or site store | Checks damage, documents and compliance on arrival |
TPI is not the same as product certification. Conformity schemes for products entering the UAE are explained in our guide to ECAS and EQM product conformity, and management system or product type certification sits under certification and compliance services.
An inspection and test plan (ITP) lists each inspection step, the acceptance criteria, who performs it and how far the inspector takes part. Three levels of involvement are common.
Mark hold points sparingly. Too many create standby and delay, too few weaken control. A balanced ITP puts holds where a failure is costly or cannot be seen later: before closing a vessel, before painting a weld, before shipping a skid. The ITP is normally agreed between buyer, vendor and inspector before manufacture starts. The same plan often calls for non-destructive testing, pressure testing and coating inspection, which the third party inspector witnesses or reviews.
A UAE third party inspection company should hold ISO/IEC 17020 accreditation for the inspection scope, and its inspectors should hold certificates suited to the equipment. EIAC, the Emirates International Accreditation Centre, accredits inspection bodies, testing laboratories, certification bodies and calibration laboratories, and publishes an accredited bodies directory.
Ask for the inspector's CV in your equipment discipline, not only the company brochure. A strong welding inspector is not automatically able to witness a transformer test.
The party with the interest in the result should appoint the inspector: the owner on a project, or the buyer on a purchase order. If the vendor or contractor chooses and pays the inspector, the independence the buyer wants is weaker.
The purchase order should say who appoints, who pays, how notice is given and what the inspector can do. Many buyers state that inspection does not relieve the vendor of responsibility, that the inspector can reject a non-conformance and that shipment needs a signed inspection release note. Our sourcing guide notes the RFQ should state who pays for third-party inspection. For engineering questions that inspection raises, the owner usually turns to its engineering consultant.
UAE conditions affect on-site TPI more than factory TPI. Inspection of installed equipment happens outdoors at ports, refineries and construction sites, so heat, humidity and dust matter.
Choose a UAE third party inspection company by checking its independence, its accreditation scope and its inspector pool for your discipline and the vendor's country.
To receive offers for one scope, post your third party inspection requirement and attach the ITP or the purchase order clauses.
TPI is priced mainly per inspector per day, and the number of days depends on the ITP, the vendor's progress and travel. Key drivers: