Industrial solvents in the UAE are the hydrocarbons, ketones, alcohols, esters, glycol ethers and chlorinated liquids used to thin paint, degrease metal, clean equipment and make inks and adhesives. This page lists UAE solvent suppliers and explains which family suits which job, why flash point matters in UAE summer storage, which solvents carry precursor controls as of 2026, and what moves price and delivery time.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified solvents suppliers who quote for your order directly.
Tell us about solvents in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Industrial solvents are liquids used to dissolve, thin, clean or carry another material, and in the UAE they are bought mainly for paint and coating work, degreasing before painting or galvanising, maintenance cleaning, printing inks, adhesives and laboratory extraction. They form one group within the industrial chemicals family for the UAE, which deals with storage, permits and pricing across all commodity chemicals. This page goes further on the solvent itself: which family fits the job, how flash point interacts with UAE summer temperatures, which solvents carry precursor controls, and what to put in a purchase order.
Specify the solvent by chemical identity, not by a trade word. "Thinner" can be a blend of aromatics, ketones and esters in any ratio, so ask for the composition or buy single solvents to a named specification.
| Solvent family | Common examples | Typical UAE use | What to specify |
|---|---|---|---|
| Aliphatic hydrocarbons | White spirit (mineral spirits), hexane, heptane | Paint thinning, general degreasing, dry cleaning | Distillation range, aromatic content, flash point; ASTM D235 is the US specification for mineral spirits |
| Aromatic hydrocarbons | Toluene, xylene, heavy aromatic naphtha | Epoxy and alkyd thinners, adhesives, inks | Purity, benzene content, sulfur, water |
| Ketones | Acetone, methyl ethyl ketone (MEK), MIBK | Fast drying thinners, resin and gun cleaning, GRP shops | Purity, water content, evaporation rate |
| Alcohols | Methanol, ethanol, isopropyl alcohol (IPA), butanol | Electronics and surface cleaning, inks, extraction | Purity, water, denaturant if ethanol |
| Esters | Ethyl acetate, butyl acetate | Polyurethane and nitrocellulose coatings, flexible packaging inks | Purity, acidity, water |
| Glycol ethers | Butyl glycol, propylene glycol methyl ether | Water-based coatings, heavy duty cleaners | Grade, water content, peroxide limit |
| Chlorinated solvents | Dichloromethane, perchloroethylene | Paint stripping, vapour degreasing, dry cleaning | Stabiliser package, exposure controls at the user site |
The solvent has to suit the resin it thins or dissolves, so coating and composite buyers usually source it alongside resins and polymers such as epoxy, polyester and polyurethane systems. Where a site wants to move away from flammable cleaning solvents, the replacement is usually a water-based cleaner built on surfactants and emulsifiers. Bulk aromatics bought by the shipload as petrochemical feedstock are a different market, covered under aromatics and bulk solvents in the petrochemicals family.
In the UAE the deciding number for solvent storage is the flash point compared with the real temperature inside the store or drum, not the air temperature on a weather report. A solvent that is only moderately flammable on its data sheet can give off an ignitable vapour once a drum sits in July sun.
The GHS criteria sort flammable liquids into four categories by flash point and initial boiling point. The wording below follows the text adopted in Canada's Hazardous Products Regulations; GCC classification follows the same GHS system, explained on the sector page.
| GHS category | Flash point | Initial boiling point |
|---|---|---|
| Flammable liquid, Category 1 | Below 23 °C | 35 °C or below |
| Flammable liquid, Category 2 | Below 23 °C | Above 35 °C |
| Flammable liquid, Category 3 | 23 °C to 60 °C | Not a criterion |
| Flammable liquid, Category 4 | Above 60 °C up to 93 °C | Not a criterion |
Acetone, toluene, ethyl acetate and the alcohols sit in categories 1 and 2 and are flammable at any UAE temperature. The trap is categories 3 and 4: white spirit, heavy naphthas and some glycol ethers are often treated as safer, yet a drum stored in an unshaded yard in Jebel Ali or Mussafah in summer can reach their flash point. Read section 9 of each safety data sheet and store category 3 and 4 solvents as if they were more volatile from May to October.
Most solvents in the UAE are traded under an ordinary chemical trading licence, with a current safety data sheet, GHS labels and storage approved by the emirate's civil defence authority, but four common solvents also sit on the international precursor list. As of 2026, check both before you sign.
| Requirement | Applies to | Authority or source |
|---|---|---|
| Table II of the 1988 UN Convention against illicit traffic | Acetone, methyl ethyl ketone, toluene and ethyl ether | UN Commission on Narcotic Drugs (tables as at 3 December 2024); UAE controlled chemicals approval through MoHAP, explained on the industrial chemicals page |
| Flammable liquids storage approval and quantity limits | Solvent stores, mixing rooms and tank farms | Civil defence of the emirate (Dubai Civil Defence in Dubai) |
| Chemical Zone plot and EHS approval | Storing or trading hazardous chemicals in Jafza | Jafza Environment, Health and Safety |
| ECAS certificate for paints and varnishes | Finished oil paints, varnishes and emulsion paints sold in the UAE, not the raw solvent | MoIAT, under Cabinet Resolution No. 6 of 2016 (per a Bureau Veritas service card dated 2023) |
The precursor listing matters more than many buyers expect. Acetone and MEK are everyday GRP and paint shop solvents, yet they appear in Table II, so ask the supplier in writing whether the UAE treats your quantity and grade as controlled and who holds the approval. Paint makers who buy solvents to formulate should also know that the finished paint needs product certification; the guide to ECAS and EQM product conformity in the UAE explains how that works. Because sources on civil defence limits and free zone conditions change, confirm them with the authority before you commit to a stock level.
UAE solvent supply comes from three channels: producers and their appointed distributors selling in ISO tanks and full drum loads, importers that hold stock and repack into drums, pails and cans in industrial areas such as Jebel Ali, Sharjah and Mussafah, and traders who buy to order. Most solvents are imported through Jebel Ali and Khalifa Port.
Local supply may widen. In March 2022 the Abu Dhabi Media Office announced that TA'ZIZ and Proman planned a natural gas to methanol plant of up to 1.8 million tonnes a year in the TA'ZIZ Industrial Chemicals Zone in Ruwais, subject to approvals and an investment decision. Ask suppliers whether locally made methanol is available for your grade before assuming an import price.
When comparing offers, ask for:
The guide to sourcing industrial suppliers in the UAE and Saudi Arabia covers licence and company checks. To collect quotes against one specification, post your solvent requirement.
Solvent prices in the UAE track crude oil, naphtha and olefin markets, then add grade, packaging and dangerous goods freight; quotes are usually valid for days rather than months.
Stocked solvents such as white spirit, xylene and IPA can usually be delivered within days. Specialty grades, chlorinated solvents and anything under precursor control take longer, and summer storage limits are a reason not to buy months ahead.