Slewing bearings in the UAE are the large ball and roller slewing rings that let cranes, excavators, port equipment, offshore cranes and rotating platforms turn under heavy load and tilting moment. This page lists UAE slewing bearing suppliers and explains the ring designs, how to specify a replacement, how to track wear and bolt condition in service, how coastal air and sand affect them, which approvals apply as of 2026, and what drives lead time.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified slewing bearings suppliers who quote for your order directly.
Tell us about slewing bearings in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
A slewing bearing, or slewing ring, is a large-diameter rolling bearing that carries axial load, radial load and tilting moment together in one unit, usually with a gear cut into one ring and bolted directly to the structures above and below. It is the most specialised item within bearings bought in the UAE, and UAE demand comes from port cranes at Jebel Ali and Khalifa, offshore and deck cranes, construction fleets, water treatment equipment and industrial turntables.
| Design | Typical UAE use | Key specification |
|---|---|---|
| Single-row four-point contact ball | Excavator superstructures, tower crane slewing, small turntables and aerial platforms | Diameter, gear (internal, external or none), bolt holes, load moment |
| Double-row ball (four-point or two-point contact) | Cranes and conveyors needing more capacity in the same diameter, wind turbine pitch systems | Row arrangement, spacers or cage, gear module |
| Crossed roller | Excavators and machinery needing stiffness and preload | Preload, running accuracy, sealing |
| Three-row roller | Mobile harbour and offshore cranes, large crawler cranes, mining machines | Axial and radial roller rows, structure stiffness, original drawing number |
| Wire race and special designs | Lightweight, high-accuracy equipment | Housing design, race wire material |
A slewing ring replaces the separate radial and thrust bearings that a smaller machine would use, so it sits apart from standard ball bearings and thrust bearings. Three-row designs use the same principles as industrial roller bearings on a much larger scale.
Specify a replacement slewing ring from the original manufacturer's drawing or part number, not from measured dimensions alone. Two rings with the same diameter, bolt circle and gear can have different raceway designs, hardening depth and load ratings, and the ring is a structural part of the crane or machine.
Size range is wide. Liebherr's product brochure gives a standard diameter range of 800 to 7,500 mm, segmented above that, with ring weights up to 25 tonnes and gear modules up to 50. SKF's brochure lists custom slewing bearings from 0.1 m to 14 m outside diameter.
In the UAE, slewing rings are worn down by sand and salt reaching the raceway and gear, by grease that hardens in heat, and by bolts losing preload. Each can be controlled with regular measurement and relubrication.
Raceway wear shows up as growing tilting clearance or axial drop. SKF describes trending drop height and displacement measurements on stacker reclaimers and cranes to see the wear rate and plan change-outs, and both SKF and Liebherr offer monitoring for large rings. Record a baseline when the ring is new, measure at fixed intervals under the same conditions, and compare with the maker's permissible limit.
Slewing ring bolts carry the full tilting moment. Use the grade, length and pretension the maker specifies, tighten with calibrated tensioners or torque tools in the stated sequence, check them at the intervals in the crane manual, and replace rather than reuse bolts where the maker says so.
Port and offshore cranes at Jebel Ali, Khalifa Port, Ruwais and Das Island work in salt-laden humid air, while construction excavators and crawler cranes work in sand. Keep raceway seals intact, regrease while slowly rotating the ring so grease spreads round the whole raceway, clean and regrease the open gear, and use greases suited to heat and water. Marine slewing rings can be built with multi-level sealing packages.
As of October 2026 we found no UAE federal regulation specific to slewing bearings; approval comes from the crane or machine maker, classification societies for marine and offshore duty, and the operator's own vendor and inspection rules.
| Requirement | Applies to | Authority |
|---|---|---|
| OEM drawing and part number | All replacement rings for cranes and machines | Equipment manufacturer |
| Classification society approval | Marine, offshore crane and propulsion rings | DNV, ABS, Lloyd's Register, Bureau Veritas |
| Manufacturer quality system to ISO 9001 | Ring production and inspection | Accredited certification body |
| Crane periodic thorough examination | Cranes after a ring change and in service | Operator and its third-party inspector |
| ADNOC Supplier Hub registration | Supply to ADNOC onshore and offshore sites | ADNOC |
SKF states that its marine slewing bearings are approved by certifying authorities such as DNV, ABS, Lloyd's Register and Bureau Veritas, and Liebherr lists the same type of classification work for maritime and wind applications.
UAE slewing bearings come mainly through crane and machine OEM parts channels, the bearing makers' own large-bearing teams and their authorised distributors, and specialist slewing ring importers for older fleets.
Makers include Liebherr, which produces ball and roller slewing rings in Germany, Mexico and Brazil for its own and other equipment; SKF, with four-point, crossed roller, three-row and wire race designs; and INA slewing rings from Schaeffler for machinery and turntables. For a crane, check whether the equipment maker requires its own original ring before buying an alternative.
A ring change usually means lifting off the superstructure, so plan it with the mobile crane or tower crane service team. To get prices from several sources, post your requirement with the drawing number and machine details, and use the supplier vetting guide before trusting a new importer.
Diameter, design, gear and certification drive price, and most slewing rings are made to order, so lead times are long and variable. Small standard rings for excavators and turntables may be stocked; large crane and offshore rings are factory items.