Navigation equipment in the UAE means the bridge instruments fitted to ships and offshore vessels: gyro and magnetic compasses, radar, ECDIS, AIS, speed logs, echo sounders, autopilots and voyage data recorders. This page lists UAE suppliers and explains carriage rules, approvals, GNSS interference and how to choose a supplier.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified navigation equipment suppliers who quote for your order directly.
Tell us about navigation equipment in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Marine navigation equipment is the set of instruments that tells a vessel where it is, where it is heading, what is around it and how deep the water is. UAE buyers are ship managers calling at Jebel Ali, Khalifa Port and Fujairah, offshore support operators serving Abu Dhabi fields, yacht and workboat owners, and yards fitting out new vessels. The page is part of the marine and offshore supply family; the wider machinery and deck range sits under marine equipment.
| Instrument | What it does | Typical makers on the directory |
|---|---|---|
| Magnetic compass and binnacle | Heading reference that needs no power | Cassens & Plath |
| Gyro compass and heading repeaters | Reliable heading feed to radar, autopilot and ECDIS | Sperry Marine, YDK Technologies |
| Radar | Shows other ships, land and marks by range and bearing | Hensoldt UK, Sperry Marine, Alphatron Marine |
| ECDIS and charts | Electronic chart display for route planning and monitoring | Sperry Marine, ChartWorld |
| Speed log and echo sounder | Speed through water and depth under keel | Skipper Electronics |
| Autopilot and bridge systems | Steering control and integrated bridge consoles | Sperry Marine, Alphatron Marine |
The makers above describe themselves as follows. Cassens & Plath lists compasses, binnacles and sextants assembled, adjusted and tested in Germany. Sperry Marine lists compass, radar, ECDIS (VisionMaster), autopilot, integrated bridge and VDR products. Hensoldt UK lists SharpEye marine radar. YDK Technologies lists gyro compasses and speed logs. Alphatron Marine lists integrated bridge consoles. ChartWorld lists ECDIS and official chart subscriptions. Skipper Electronics lists Doppler speed logs and echo sounders.
SOLAS chapter V sets the carriage rules, and each flag state applies them. As an example, the German flag administration's guidance says AIS is required for ships of 300 GT and above on international voyages, and ECDIS for passenger ships of 500 GT and more, tankers of 3,000 GT and more, and cargo ships of 10,000 GT and more, with a later date for cargo ships between 3,000 and 10,000 GT built on or after 1 July 2014. VDRs are required on all passenger ships and on new ships of 3,000 GT and above on international voyages. Other flags may differ in detail, so use the vessel's flag rules and certificates, not another flag's list.
Small craft, workboats and yachts have lighter requirements, but the buyer still needs to match the instrument to the vessel's class and trading area. When you reply to an enquiry, ask for the vessel's flag, gross tonnage, class and trading area first.
Ships under EU and EFTA flags need equipment with the MED wheelmark, which shows the notified body's ID number and comes with the manufacturer's EC declaration of conformity. The directive is 2014/90/EU, and an Indian class society page adds that several other flag administrations also accept wheelmarked equipment. UAE-flagged and foreign ships calling in the UAE meet their own flag and class rules, so ask which approvals the vessel actually needs. For ECDIS, the German guidance says the system must be type-tested to IMO and IEC standards by a notified body to replace paper charts.
Satellite positioning in the Gulf has been unreliable at times, so buyers should plan for cross-checks. An industry article dated 2 March 2026 reported more than 1,100 vessels with GPS and AIS interference in a single 24-hour period in the region, with ship positions displaced onto airports and inland sites. It also said P&I club circulars recommend treating GNSS position with caution there, and that going dark on AIS increases dependence on radar and visual watchkeeping.
For equipment choice this means three things. Keep a working gyro or magnetic compass and radar fix as independent checks. Ask whether a receiver offers multi-constellation operation or interference alerts. Train officers to compare GNSS, radar ranges and visual bearings regularly. Check current advisories from the relevant authorities, since the situation changes.
A ShipServ listing page for the UAE shows firms offering navigation equipment, ECDIS, GMDSS, integrated bridge systems, satellite communication and VDR inspection services. Listings are self-reported. Ask each company for maker authorisation, certificates for VDR annual performance tests and calibration, and a sample service report. Radar, ECDIS and gyro faults are time critical in port, so ask about attendance times at Dubai, Abu Dhabi and Fujairah.
Related pages: life saving equipment for beacons and survival gear, and ship chandlers for stores. Post your requirement to reach several suppliers.
Price depends on the instrument class, the vessel's size, approvals and whether the job is a new installation or a replacement. Lead time depends on stock and installation scheduling. Retrofits often need a dock or a port stay with the maker's engineer, so book installation windows early and order cables and mounting parts with the equipment.
Equipment that passes a factory test can still fail on the bridge, so a short routine on arrival and before each voyage is worth the time. Compare the gyro and magnetic compass readings and log the difference. Check that radar ranges match a known mark, that AIS shows the right ship data, and that the ECDIS chart permits are valid for the whole passage. Look at the voyage data recorder status lamp and make sure its annual performance test certificate is in date.
Owners can help by keeping spares for the items that fail most often in hot ports, such as fuses, cables, connectors and scanner parts, and by storing them in a cool room. Record every fault with date and port so the supplier can see patterns. For retrofits in the UAE, ask whether the installer will complete the commissioning checklist with the master and the superintendent on board, and keep the signed copy with the ship's certificates for class and port state inspections.