Marine coatings in the UAE are the antifoulings, anticorrosive hull primers, ballast tank epoxies, deck paints and splash zone systems that protect ships, jetties and offshore structures from seawater and fouling. This page lists UAE marine coating suppliers and explains each type, how warm Gulf water changes the choice, the IMO antifouling and ballast tank rules as of 2026, and what drives cost and delivery.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified marine coatings suppliers who quote for your order directly.
Tell us about marine coatings in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
A fact-checked comparison of Jotun and National Paints for Gulf buyers: where each makes paint, their decorative, fire, floor and marine ranges, support and the approvals to ask for.
Marine coatings are paint systems designed for permanent or frequent contact with seawater: they stop steel corroding under immersion and, on hulls, stop barnacles, weed and slime from growing. In the UAE they are a specialised branch of industrial paints and coatings in the UAE, bought by shipyards and drydocks, ship managers, offshore contractors working ADNOC fields, port operators at Jebel Ali, Khalifa Port and Fujairah, and builders of yachts, dhows and workboats.
A ship is not painted with one product. Each area of the hull and each tank gets its own system, and the antifouling is chosen for how the vessel trades.
| Type | Typical UAE use | Key specification points |
|---|---|---|
| Self-polishing antifouling (SPC, silyl acrylate, rosin based) | Underwater hulls of tankers, container ships, offshore supply vessels and tugs | Speed, activity and idle days, docking interval, biocide-based, AFS compliant |
| Foul release coatings | Vessels with steady trading patterns where fuel saving justifies the cost | Biocide-free surface, sensitivity to damage and long idle periods, careful application |
| Anticorrosive hull primers | Under the antifouling and in the boot top | Epoxy type, compatibility with cathodic protection, abrasion from tugs and fenders |
| Ballast tank coatings | Seawater ballast tanks on newbuilds and in repair | IMO PSPC compliance, epoxy, nominal 320 micron dry film, stripe coats |
| Deck and topside coatings | Decks, superstructures, hatch covers | UV-stable polyurethane topcoat, anti-slip finish, abrasion resistance |
| Splash zone and offshore systems | Jackets, jetties, piles and seawater intakes | ISO 12944-9 categories CX and Im4, thick epoxy or glass flake, repairability |
Fixed structures overlap with protective coatings for steel structures, and many marine primers are epoxy coatings or zinc-based anti-corrosion primers. Coatings bought as part of vessel supply are also listed under marine paints in the marine and offshore sector, and yards themselves under shipbuilding and ship repair.
Warm, salty Gulf water speeds both corrosion and fouling, so UAE operators choose antifoulings for high fouling pressure and pay close attention to idle time. Heat and humidity in the drydock then decide how well the system goes on.
Self-polishing antifoulings release biocide as the surface slowly wears in moving water. A vessel that waits weeks at anchorage off Fujairah or Khor Fakkan, or a supply boat that sits in port between jobs, polishes less and fouls more. Give the coating supplier the real operating profile, including speed, activity and expected idle days, so the product and thickness match the docking interval.
Hulls, jetty piles and seawater intakes rely on the coating plus cathodic protection. The coating must tolerate the alkaline conditions cathodic protection creates at damaged spots, so ask for cathodic disbondment data for immersed systems. ISO 12944-9 sets the qualification for offshore structures in CX and Im4, with submerged service up to 50 degrees Celsius.
Summer work in Dubai and Abu Dhabi yards means hot steel, humid nights and dust. IMO's ballast tank standard bars blasting when relative humidity is above 85 percent, and similar limits on steel temperature and dew point apply to most marine products. Plan dehumidification for tank work and schedule hull coats around the cooler hours.
Marine coatings follow international maritime rules more than national product rules: the IMO Anti-Fouling Systems (AFS) Convention controls what an antifouling may contain, and IMO's Performance Standard for Protective Coatings (PSPC) sets how ballast tanks are coated. Classification societies and flag states enforce both. We checked the points below in October 2026.
| Requirement | Applies to | Authority |
|---|---|---|
| AFS Convention, cybutryne amendment MEPC.331(76) | All ships: no cybutryne antifouling applied or reapplied from 1 January 2023; organotins such as TBT already banned | IMO, enforced by flag state and classification societies |
| International AFS certificate | Ships on international voyages, renewed at the antifouling survey | Flag state or class on its behalf |
| PSPC, IMO Resolution MSC.215(82) | Dedicated seawater ballast tanks of ships of 500 gross tonnage and above, double-side skin spaces of bulk carriers 150 m and longer | IMO via SOLAS, checked by class |
| ISO 12944-9:2018 | Paint systems for offshore and related structures, CX and Im4 | ISO, called up by the owner |
| ADNOC and offshore contractor coating specifications | Offshore platforms, jetties and marine facilities of ADNOC companies | ADNOC group companies |
| MoIAT paints and varnishes scheme | Paints placed on the UAE market; scope for marine products to be confirmed | Ministry of Industry and Advanced Technology |
Ships carrying a cybutryne antifouling had to remove it or seal it under a barrier coat at the next antifouling renewal after 1 January 2023, and no later than 60 months after it was applied. Exemptions include some fixed and floating platforms, FSUs and FPSOs built before 2023 that have not docked since, and ships not on international voyages. Ask the coating maker for a cybutryne-free statement so the surveyor can issue the AFS certificate.
PSPC aims at a 15-year target useful life with the coating in "good" condition. It calls for blast cleaning to Sa 2.5 with a 30 to 75 micron profile, a nominal total dry film of 320 microns for epoxy systems, pre-qualified products and a Coating Technical File that stays with the ship. ISO 12944-9 is listed by ISO as due for revision, so check the edition your specification cites.
For ships and offshore assets, choose a marine coating maker by its approvals and its technical service at the dock as much as by price. The maker's inspector supports the yard through surface preparation and each coat, and the warranty depends on those records.
Marine coating makers selling in the UAE include Jotun, with antifoulings, ballast tank and hull systems; Hempel, whose fouling control range covers SPC (Oceanic+, Globic), silyl acrylate (Dynamic, Sonic) and rosin-based (Olympic+) antifoulings; PPG, with marine coatings under the Sigma name; Nippon Paint, whose group supplies marine coatings; and Sherwin-Williams, with protective and marine systems.
Before awarding, ask for:
Touch-up paint for vessels in port often comes through ship chandlers. For a quotation against your docking specification, post your marine coating requirement with vessel type, areas and docking date. The supplier sourcing guide covers checking that a distributor is authorised.
The cost of a marine coating job in the UAE depends most on the antifouling technology, the area to be blasted and the docking time, not the paint price alone. A premium antifouling that extends the docking interval can cost less over the cycle than a cheaper one.
Common antifoulings and primers are held in the UAE for repair yards. Large orders, special colours and products needing type approval paperwork need confirming against the docking date.
Which paint and coating brands make paint in the UAE and Saudi Arabia, how to specify decorative, epoxy, anti-corrosion and fire coatings, and the MoIAT, Dubai and SASO rules that apply.