Liquid Applied Membranes Suppliers, UAE

Liquid Applied Membranes are fluid waterproofing coatings that cure to form a seamless, elastic membrane on concrete, metal, and other substrates. They are applied by roller, brush, spray, or trowel to roofs, balconies, wet areas, and complex geometries where sheet membrane installation is difficult. The ability to create a joint-free waterproofing layer makes liquid membranes ideal for irregular shapes and areas with many penetrations.

0 suppliers found

Active:ISO 45001 API ASME Clear all

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Request Quotes Clear all filters

Post your requirement, get quotes from multiple suppliers

Tell us about liquid applied membranes in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

Liquid applied waterproofing membranes are single or multi-component polymer coatings that cure to form a continuous, elastic, waterproof film. Chemistry types include polyurethane (the most common for roofing and exposed applications, UV-stable formulations available), acrylic (water-based, for protected applications and wet areas), polyurea and polyaspartic (fast-curing, for time-critical and high-performance applications), and bitumen-rubber emulsions (for below-grade and concealed applications). Applied wet film thickness typically ranges from 1 to 3mm, curing to a 0.8 to 2mm dry film.

In the UAE and Saudi Arabia, liquid membranes are specified for flat roof waterproofing (particularly over complex roof geometries with many penetrations), balcony and terrace waterproofing beneath tile finishes, bathroom and kitchen waterproofing (as a flexible tanking layer), car park deck waterproofing (combined with traffic-bearing wearing course), and podium slab waterproofing. Key specifications include elongation at break (minimum 200 percent for structural substrate movement), tensile strength, crack-bridging ability, UV resistance (for exposed applications), and compatibility with the substrate and any finishes applied over the membrane.

Major liquid membrane brands in the GCC include Sika (Sikalastic), BASF (MasterSeal), Fosroc, Mapei, Tremco, and Jotun. Procurement managers should specify liquid membranes as complete systems (primer plus membrane layers plus topcoat) from a single manufacturer, verify the applicator's training and manufacturer approval, and build in quality assurance measures including wet film thickness checks during application and adhesion pull-off testing after curing. Liquid membranes are sensitive to substrate moisture, ambient temperature, and humidity during application — in the GCC, application windows may need to be restricted to cooler hours or seasons for optimal curing.

Frequently Asked Questions — Liquid Applied Membranes

When should I choose a liquid membrane over a sheet membrane?

Liquid membranes are preferred when the substrate has a complex geometry with many penetrations, upstands, corners, and irregular shapes that make sheet membrane detailing difficult. They are also ideal for areas that are too small or restricted for torch-on application. Sheet membranes remain more common for large, relatively flat roof areas where their consistent factory-controlled thickness and proven long-term performance are advantageous.

How is the quality of liquid membrane application verified?

Quality is verified by checking wet film thickness during application using a wet film comb gauge (achieving the specified DFT requires applying the correct WFT accounting for solids content), adhesion pull-off testing after curing (minimum 1 N/mm2 on concrete substrates), visual inspection for pinholes, bubbles, and missed areas, and final flood testing of horizontal surfaces (24 to 48 hour ponding test).

Can liquid membranes be applied in hot GCC weather?

Most liquid membranes can be applied in ambient temperatures up to 35 to 40 degrees Celsius, but substrate temperature should not exceed 50 degrees Celsius as this can cause rapid curing, blistering, or poor adhesion. In the GCC, application is often scheduled for early morning, late afternoon, or overnight to avoid peak temperatures. Some polyurea and polyaspartic systems are formulated for hot-climate application with extended working times.