Export wooden packaging in the UAE means crates, cases, skids and dunnage built for shipping machinery and equipment, usually heat-treated and stamped under ISPM 15. This page explains the main types, the treatment and marking rules, how heat and humidity affect cargo, and what drives price and lead time.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified export wooden packaging suppliers who quote for your order directly.
Tell us about export wooden packaging in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Export wooden packaging is timber and plywood packing built to carry goods across borders: crates and cases for machinery, boxes for fragile equipment, skids and bearers for heavy loads, and dunnage to block cargo in containers. In the UAE it matters most for exporters and re-exporters moving through Jebel Ali, Khalifa Port and Sharjah, because wood that is untreated or unmarked can be refused or ordered treated at the destination.
This page sits within industrial packaging in the UAE and concentrates on made-to-measure crates and cases for export. Standard pallets, pooling and rack loading are covered on the companion page pallets and crates, so this page does not repeat them. Pair the wood with strapping and banding and with bubble wrap and foam packaging for the inner protection.
| Type | Typical UAE use | Points to specify |
|---|---|---|
| Open crate (slatted) | Pumps, motors, steel fabrications, spare parts | Gross weight, fork pockets, lifting points, slat spacing |
| Closed plywood case | Control panels, instruments, electronics, precision parts | Plywood grade, internal supports, moisture barrier, desiccant |
| Skid base and bearers | Generators, compressors, switchgear | Load spread, fixing to the base, sling positions |
| Dunnage and blocking | Container and flat rack bracing | Treated and marked timber or an exempt alternative |
| Heat-treated pallet for export | Palletised boxed goods | Treatment mark, size to destination handling |
Yes, whenever the destination country applies ISPM 15 to solid wood packaging, which most major trading partners do. ISPM 15 is the international standard titled Regulation of wood packaging material in international trade. It aims to cut the risk of quarantine pests travelling in raw wood packaging, and it includes dunnage but excludes wood processed to be pest-free, such as plywood.
One North American industry source describes the heat treatment requirement as a core temperature of at least 56 degrees C held for 30 minutes, and lists methyl bromide, sulphuryl fluoride and dielectric heating as other approved treatments. Finished crates, pallets, skids and boxes are stamped on at least two opposite sides with the IPPC mark and the facility's unique number. Pressure-treated wood does not qualify unless it was heat-treated and stamped before preservative treatment. Check the current treatments and mark format in the standard itself, since this is a summary of a trade source.
Composite panels such as plywood, particleboard, OSB and veneer are exempt from ISPM 15 because manufacturing heat already deals with pests. That is why many UAE exporters build cases from plywood panels with a small amount of solid timber framing. The solid timber, if any, still needs treatment and a stamp, so ask whether the maker uses treated frames or all-plywood construction.
The UAE summer is hot and humid on the coast, and cargo packed in July can sit in a sun-heated container for weeks before reaching a cooler destination. Air that is warm and damp inside a closed case condenses when the container cools, so unprotected metal parts can rust and cartons can sag. Wood moves moisture in and out, which is why dry timber and a barrier film or sealed liner are good practice for machine parts.
Sensible measures include kiln-dried timber, a moisture barrier film or VCI wrapping on the product, desiccant sized to the case volume, and a vented or sealed design chosen to suit the route. Seal gaps where the crate meets the base, because dust and sand collect there on open yards. Mark the case with handling symbols, weight, centre of gravity and lifting points. Wooden crates are heavy, so include their weight when you book freight and check the container's payload.
Start from the load path, not the box. The weight of a pump skid or generator must reach the base through bearers or fixing points that the packer can see on the drawing, and the base must be strong enough for the sling or forklift method that will be used. Bolt or strap the equipment to the base so it cannot shift, and block it on all four sides. Lifting points, fork pockets and the centre of gravity belong on the outside of the case in clear marks.
Leave protruding items such as gauges, shafts or nozzles supported and covered, and list loose parts packed inside. Photograph the equipment before closing the lid so any damage claim can be checked, and record the gross weight and outside dimensions on the packing list. For tall or narrow cargo, add diagonal bracing, since the first handling stress comes from tilting during loading.
The wood carries its own proof through the stamp, but exporters still need the shipment paperwork to match. Keep the supplier's treatment record, the facility number and the date, and make sure the packing list describes the packaging type. Some destinations ask for a statement on the invoice or bill of lading that the packaging is treated and marked, so ask your forwarder what the receiving customs office expects. If a consignment moves in a mixed container, the mark on every piece of solid wood is what the inspector sees first.
Crate and case makers are mostly local workshops and packing companies around Sharjah, Ajman, Jebel Ali and Mussafah, many of which also provide heat treatment, plywood cutting and on-site packing. Large exporters sometimes keep carpenters in-house, but most buy by project. Timber and board come from the supply chain described under timber and wood products and plywood and MDF.
Ask each supplier for the treatment provider and its facility number, the type of wood or board used, a drawing or sketch of the crate, the design load, and photographs of previous work for similar cargo. If shipping documents are part of the job, freight forwarding services and customs clearance services can advise on destination rules and certificates.
Size and weight lead, because a larger crate needs more timber and stronger joints. After that come heat treatment, plywood grade, liner and desiccant, the number of units and whether the packer must pack on your site. Standard sizes can be quick, while a bespoke case needs a drawing, cutting, assembly and, if used, a treatment cycle and the marking step.
Agree the packing list, dimensions, weight, destination and any customer packing instruction in writing. If you need quotes from several makers, post a requirement with those details.