Dry Ice Blasting Services Suppliers, UAE

Dry ice blasting services in the UAE clean generators, turbines, electrical panels, moulds, food lines and printing machinery by firing solid CO2 pellets with compressed air, leaving no water, grit or chemical behind. This page lists UAE dry ice blasting contractors and equipment suppliers and explains where the method fits, blaster and compressor specs, CO2 and noise controls, and what drives the price.

0 suppliers found

Active:Manufacturer 4+ stars 15+ years Clear all

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Request Quotes Clear all filters

Post your requirement, get quotes from multiple suppliers

Tell us about dry ice blasting services in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

What is dry ice blasting, and where do UAE sites use it?

Dry ice blasting propels pellets of solid carbon dioxide at a surface with compressed air; the pellets sublimate to gas on impact, so the only residue is the dirt that was removed. It is one of the methods within industrial cleaning in the UAE, chosen where water from high pressure water jetting or solvents from chemical cleaning would damage the equipment or need long drying and disposal. Makers describe dry ice as soft, non-abrasive and not electrically conductive, which is why it is used on windings, panels and precision tooling.

Application	Typical UAE users	Why dry ice is chosen
Generators, motors and turbine components	Power and desalination plants, utilities, aluminium smelters during outages	No water to dry out of windings, cleaning without full dismantling in many cases
Control cabinets, switchgear and panels	Substations, district cooling plants, factories, data and utility buildings	Non-conductive media and no moisture; follow the owner's isolation rules
Moulds, casting and forging tools	Plastics plants, foundries and die casting shops in Sharjah, Ajman and KIZAD	Moulds can often be cleaned in the press while warm, cutting downtime
Food filling, mixing and conveying lines	Bakeries, dairies, beverage and snack plants in Dubai Industrial City and JAFZA	Dry process, no chemical residue, less water on the line
Printing presses, ovens and heat exchangers	Print and packaging plants, bakeries, process plants	Removes ink, carbon and baked-on deposits without abrasive damage
Fire and smoke restoration, coating removal	Buildings and plant after a fire, light coating removal	No secondary blast media to collect

Dry ice does not replace abrasive blasting for heavy rust and mill scale or for preparing steel for coating; that work belongs to shot blasting and sand blasting contractors. The removed dirt still has to be collected, often with industrial vacuums.

What equipment and supplies does a dry ice blasting job need?

A dry ice job needs three things: a blasting machine, a compressed air supply large enough for it, and a steady supply of fresh dry ice pellets. Undersizing the compressor is the most common reason a job runs slower than quoted.

As an example of the specs to compare, Kärcher rates its IB 15/120 blaster at 30 to 120 kg of dry ice per hour, 2 to 16 bar air pressure and 2 to 12 m3/min of air, using 3 mm pellets, with a stated sound pressure level of 125 dB(A). Its smaller IB 7/40 is positioned to run from a much smaller air supply, such as a plant's own compressed air system. Check the air demand of any blaster against the portable diesel compressors or plant air compressors you will use, and add an aftercooler or dryer, since wet air freezes in the hose.

Pellets come from industrial gas and CO2 suppliers. Dry ice sublimates in storage, so it is delivered in insulated containers close to the work date; ask the contractor how it secures supply for multi-day outages.

How do UAE heat, humidity and confined areas affect dry ice blasting?

In the UAE the main site issues are carbon dioxide build-up in enclosed spaces, very high noise, and condensation on cold surfaces in humid coastal air. Each needs a control in the method statement.

CO2 in enclosed spaces

Every kilogram of pellets becomes CO2 gas, which is heavier than air and collects in pits, generator housings, basements and switch rooms. The US occupational limit is 5,000 ppm averaged over eight hours, NIOSH sets a short-term limit of 30,000 ppm, and 40,000 ppm is listed as immediately dangerous to life or health. Ask for forced ventilation and CO2 monitoring from gas detection suppliers whenever work is indoors.

Noise

A sound pressure level in the region of 125 dB(A) at the blaster means double hearing protection for operators and a barrier zone for other trades.

Humidity and condensation

Blasted surfaces are chilled, and in humid summer air on the coast moisture can condense on them. Allow equipment to return to ambient temperature, or dry it, before re-energising panels and windings.

Which rules and approvals apply to dry ice blasting in the UAE?

No UAE regulation is specific to dry ice blasting; the job runs under the asset owner's permit to work and electrical isolation rules, workplace exposure limits for CO2 and noise, and the emirate's waste rules for the removed material. The table was checked as of 2026; confirm requirements with the asset owner and your emirate's authorities.

Requirement	Applies to	Authority or source
Permit to work, electrical isolation and lock out	Blasting generators, switchgear and live plant areas	The asset owner
CO2 exposure: 5,000 ppm 8 hour TWA, 30,000 ppm NIOSH STEL, 40,000 ppm IDLH	Indoor and confined work with dry ice	OSHA and NIOSH values, used as reference where owners adopt them
Abu Dhabi OSHAD framework for workplace safety	Contractors working in Abu Dhabi	Abu Dhabi Public Health Centre and sector regulators
Hazardous waste permit or NOC and licensed transporter	Removed oily, chemical or fire-damaged residues in Dubai	Dubai Municipality
Waste transport licensing	Removed residues leaving sites in Abu Dhabi	Environment Agency Abu Dhabi (EAD)
Food safety rules of the plant	Blasting on food contact equipment	The plant's food safety system and the emirate's food authority

Dry ice blasting itself adds no secondary waste, but the material it removes keeps its classification: oil, ink, or soot from a fire can be hazardous waste under Dubai Municipality and EAD rules.

Who supplies dry ice blasting in the UAE, and should you buy or hire?

UAE buyers can hire a dry ice blasting contractor with its own machines, compressors and ice supply, or buy a blaster for a plant that cleans moulds or lines every week. Occasional outage work on generators and panels is usually hired; daily mould cleaning often justifies owning a machine.

Ask for the blaster model, nozzle options and pellet size, and the compressor capacity brought to site.
Check the contractor's experience on your equipment type, especially generators and switchgear.
Ask for the CO2 monitoring, ventilation and noise plan.
Agree how removed residue is collected and where it goes.
For a purchase, confirm local spares, nozzle stock and service from the authorised distributor.

The guide to sourcing industrial suppliers in the UAE and Saudi Arabia covers vendor checks. To compare offers, post your dry ice blasting requirement with the equipment, area, location and outage window.

What drives the price and lead time of dry ice blasting in the UAE?

The price of dry ice blasting in the UAE is driven mainly by blasting hours and dry ice consumption, then by compressor hire, access and the controls needed for indoor work.

Dry ice: kilograms per hour multiplied by hours, plus delivery.
Air: compressor size, fuel and dryer.
Deposit: thin dust is fast; baked carbon or cured resin is slow.
Access and controls: scaffolding, dismantling, ventilation, CO2 monitoring.
Shift pattern: night and weekend outage work.

Hired crews can usually mobilise at short notice for small jobs, but power plant outages are booked ahead. Blasters for purchase may be in distributor stock or shipped to order through Jebel Ali.

Sources

Frequently Asked Questions — Dry Ice Blasting Services

What can dry ice blasting clean in UAE plants?

Dry ice blasting in UAE plants is used on generators, motors, turbine parts, control cabinets, switchgear, moulds and casting tools, food filling and conveying lines, printing presses, ovens and heat exchangers, where water, grit or chemicals would damage equipment or leave residue.

Is dry ice blasting safe on electrical equipment?

Dry ice is not electrically conductive and leaves no moisture, so it is widely used on panels, switchgear and generator windings. UAE asset owners still apply their own isolation and permit rules, and cleaned surfaces should be dry and back at ambient temperature before re-energising.

What CO2 limits apply to dry ice blasting indoors?

The US OSHA limit for carbon dioxide is 5,000 ppm averaged over eight hours, NIOSH sets a 30,000 ppm short-term limit, and 40,000 ppm is immediately dangerous to life or health. UAE contractors working indoors should provide ventilation and continuous CO2 monitoring.

What compressor does a dry ice blaster need?

It depends on the machine. Kärcher states its IB 15/120 uses 2 to 12 m3/min of air at 2 to 16 bar, while the IB 7/40 is designed for much smaller air supplies. In the UAE, add an air dryer or aftercooler so humid air does not freeze in the hose.

Does dry ice blasting create waste in Dubai?

Dry ice blasting creates no secondary blast media, because pellets turn to CO2 gas. The material removed, such as oil, ink or fire soot, keeps its waste class, and hazardous residues in Dubai need a Dubai Municipality permit and an approved transporter.

Is dry ice blasting a substitute for sand blasting?

Not for heavy rust, mill scale or coating preparation. Dry ice is soft and non-abrasive, so it removes dirt, grease, carbon and some coatings without damaging the substrate. UAE projects that need a blast profile on steel still use abrasive or shot blasting.