Chemical cleaning services in the UAE use circulated or soaked solutions of acids, alkalis and chelants to remove scale, oxide, oil and corrosion products from boilers, heat recovery steam generators, exchangers and new piping. This page lists UAE chemical cleaning contractors and explains the main cleaning types, how to decide a boiler needs cleaning, ASTM A380 and A967 for stainless steel, spent solution disposal and pricing.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified chemical cleaning services suppliers who quote for your order directly.
Tell us about chemical cleaning services in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Chemical cleaning dissolves or loosens deposits that water and mechanical tools cannot reach, by circulating, soaking or spraying a solution matched to the deposit and the metal. It is the chemistry branch of industrial cleaning in the UAE, bought by power and water plants, refineries, gas plants, district cooling operators and EPC contractors commissioning new units. Where deposits are hard but reachable, hydro jetting of tube bundles is the usual alternative, and many exchanger jobs combine the two.
| Cleaning type | Typical UAE use | What the contractor must specify |
|---|---|---|
| Pre-operational (pre-commissioning) cleaning | New boilers, HRSGs, condensate and feedwater lines before first firing; new lube and hydraulic oil systems | Degreasing stage, scale removal stage, flushing velocities, cleanliness acceptance |
| Post-operational boiler and HRSG cleaning | Removing iron oxide deposits from evaporator tubes after years of service at combined cycle and cogeneration plants | Deposit analysis from tube samples, solvent choice, inhibitor, corrosion coupons |
| Heat exchanger and condenser descaling | Carbonate and sulphate scale from seawater and cooling tower water in power, desalination and district cooling plants | Scale analysis, metallurgy of tubes and tube sheets, circulation loop, neutralisation |
| Pickling and passivation of stainless steel | New stainless piping and tanks in food, pharma, water and chemical plants, especially after welding | Heat tint removal, acid type, rinsing, test method to ASTM A967 |
| Degreasing and oil flushing | Compressor, turbine lube and hydraulic systems before start-up | Detergent or solvent type, particle count target, flushing rig |
The chemicals themselves are bought from acid and alkali suppliers in the UAE and industrial cleaning chemical suppliers, but most plants hire a contractor that brings the pumps, heaters, tanks, laboratory and chemists as one package.
A boiler or HRSG should be chemically cleaned when tube samples show heavy or reactive deposits, not on a fixed calendar. The International Association for the Properties of Water and Steam (IAPWS) sets this out in its 2016 technical guidance TGD7-16 for HRSG high pressure evaporators.
The IAPWS method is to cut tube samples from the high pressure evaporator at an outage and measure the deposit loading. Under that guidance, a sample below about 15 mg/cm2 with no sign of concentration or reaction products suggests the next sampling can wait 20,000 to 25,000 operating hours, while loadings above 30 mg/cm2 suggest cleaning is needed. IAPWS stresses that the boundaries are general guidance, that choosing the cleaning procedure is not straightforward, and that pre-testing is advised; the deposit analysis also tells the chemist which solvent to use.
For UAE combined cycle and cogeneration plants, ask bidders to base the method on that analysis, run a laboratory test on a real tube sample before the full clean, and install corrosion coupons during the job to show how much base metal the solution removed.
Three local factors shape a chemical cleaning plan in the UAE: high ambient and process temperatures, seawater-derived scale, and the toxic gases that some deposits release when acid reaches them.
Acid attack on steel rises with temperature, and corrosion inhibitors work only within a stated temperature range. Exposed piping in a UAE summer can heat the solution beyond what was planned. Ask the contractor for the inhibitor data sheet, the maximum solution temperature, and how it will monitor temperature in the loop.
Desalination plants and seawater cooled condensers in Taweelah, Jebel Ali and Fujairah build scale on copper alloy, titanium and stainless steel surfaces. Each metal tolerates different acids, so the procedure must list every material in the circuit, including gaskets and valve trims.
Acid can release hydrogen sulphide from sulphide scale and hydrogen from the metal surface, so vents, gas monitoring and confined space rescue equipment belong in the method statement. Chemical handling also needs acid suits and respiratory protection for acid fumes.
No UAE authority publishes its own chemical cleaning code; owners call up international practice for the method and the emirate's waste rules for the spent solution. The table was checked as of 2026; confirm with the asset owner and the waste authority for your emirate.
| Requirement | Applies to | Authority or source |
|---|---|---|
| ASTM A380, Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems | Stainless steel pickling and passivation, as a guide unless the contract makes it mandatory | ASTM International |
| ASTM A967/A967M, chemical passivation treatments and verification tests (current revision A967/A967M-25) | Nitric, citric or electrochemical passivation of stainless parts | ASTM International |
| IAPWS TGD7-16 deposit sampling and need-to-clean guidance | HRSG high pressure evaporators | IAPWS |
| Hazardous waste permit or NOC before transport, licensed transporter, disposal permit with each load | Spent acid, chelant and rinse water in Dubai | Dubai Municipality |
| Licences for waste transport and treatment providers | Spent solution leaving sites in Abu Dhabi | Environment Agency Abu Dhabi (EAD) |
| Permit to work, isolation and confined space entry | All chemical cleaning inside an operating plant | The asset owner |
Passivation results are usually proven by tests named in ASTM A967, such as water immersion, high humidity, salt spray or copper sulphate. Food, pharmaceutical and water plants may need test documentation for their own audits, so agree the test and the report format in the contract.
Chemical cleaning in the UAE is supplied by specialist contractors, by water treatment companies that extend into boiler and exchanger cleaning, and by the cleaning arms of larger maintenance contractors. Fewer firms have the laboratory, heating and circulation equipment for a full HRSG clean than for simple exchanger descaling.
The guide to sourcing industrial suppliers in the UAE and Saudi Arabia covers pre-qualification. Related work is often bundled: vacuum recovery of loosened sludge and pigging and flushing of new pipelines. To compare bids on one scope, post your chemical cleaning requirement with the equipment, metallurgy, deposit analysis and outage window.
The price of chemical cleaning in the UAE depends on the system volume, the number of stages, the deposit type and the volume of spent solution to treat. Circuits that must be split into several loops, or metals that need special solvents, add time and chemistry.
Lead time follows the outage plan. Book HRSG cleans before the outage is fixed, since tube samples, lab tests and chemical deliveries all need weeks.