Conveyor chains in the UAE are the long-pitch steel and plastic chains that carry material in bucket elevators, drag, apron and slat conveyors, bottling lines and logistics systems. This page lists UAE conveyor chain suppliers and explains the main chain types, how to specify pitch, rollers and attachments, how abrasive dust and heat wear them, which standards apply as of 2026, and what sets price and lead time.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified conveyor chains suppliers who quote for your order directly.
Tell us about conveyor chains in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
A conveyor chain is a chain built to move product or bulk material rather than to transmit power between two shafts, usually with a longer pitch, larger rollers and attachments that carry buckets, flights, slats or carriers. In the UAE it is one of the chain lines within belts and chains for UAE plants. Short-pitch drive chain is covered on the companion page for precision roller chains, and the complete machines on chain conveyors.
UAE buyers are cement and clinker grinding plants in Ras Al Khaimah, Fujairah and Al Ain, aggregate and quarry operators in the northern emirates, aluminium and steel works in Jebel Ali and Abu Dhabi, food, dairy and water bottling plants, and logistics hubs around Jebel Ali and Dubai South.
| Type | Typical UAE use | What to specify |
|---|---|---|
| Bush and roller conveyor chain (ISO 1977 metric series) | General conveyors, slat and pallet conveyors, light elevators | Breaking load series, pitch, roller type (bush, plain or flanged), solid or hollow pin |
| Bucket elevator chain | Cement, clinker, limestone and gypsum elevators | Chain type and pitch, bucket attachment, hardened pins and bushes, sprocket or wheel |
| Drag and scraper chain | Clinker, ash and bulk drag conveyors, en masse conveyors | Flight design, wear plates, sealed joints, case-hardened components |
| Engineering class chain (welded or cast) | Heavy apron feeders, water treatment collectors, mill feed | Maker's chain number, attachment drawing, sprocket profile |
| Hollow pin chain | Conveyors where cross rods or fixtures pass through the pins | Pitch, pin bore, attachment spacing |
| Slat top and plastic conveyor chain | Bottling, canning, food and packaging lines | Straight or side-flexing, top plate material, width, sprocket fit |
Engineered conveyor chain and its sprockets and traction wheels should be bought as a matched set, because a worn sprocket profile quickly damages new chain. Where flat belting can do the job, compare against belt conveyors before committing to chain.
Size the chain on working load and pitch from the conveyor design, then choose the wear surfaces, pin type and coatings for the material handled and the site. In UAE cement and quarry plants the controlling factor is usually abrasive wear, not tensile strength.
Quote the breaking load series, pitch, roller diameter and type, pin type and attachment code from the existing chain or the conveyor drawing. ISO 1977, adopted in the Gulf as GSO ISO 1977, standardises bush, plain and flanged roller conveyor chains with solid or hollow pins, K attachments and deep plates, so that complete chains and individual links can be swapped for repairs.
Clinker, limestone and sand dust mix with lubricant and cut pins and bushes. U.S. Tsubaki recommends heat-treated chain with plated pins and bushings and joint seals that guard against abrasive contaminants for bucket elevators and drag conveyors in cement plants, and offers sprockets with wear indicator pins so teeth are replaced before failure.
Clinker and hot meal conveyors and chains running beside kilns, aluminium casting lines and ovens run far above ambient in a UAE summer. Ask the maker for the chain's temperature limit and lubrication method, and avoid plastic chains near heat: Habasit warns that its plastic chains will burn if exposed to sparks, open flame or excessive heat.
Slat top and side-flexing plastic chains suit washdown bottling and packaging lines. Habasit's HabaCHAIN range includes straight and radius chains for case handling, accumulation and incline duty. Use food-grade lubricants where product contact is possible, and match chain material to the cleaning chemicals used on site.
Machine Design notes that conveyors can usually run to about 2 percent chain elongation, compared with about 1.5 percent for power drives. Check the maker's limit for your chain, and measure on a schedule because elevator chain stretch shifts buckets and causes boot and head damage.
Conveyor chains in the UAE are bought to ISO 1977 for metric bush and roller chain, or to the maker's own engineering class designations, and we found no UAE regulation specific to conveyor chain as of 2026.
| Standard or requirement | What it covers | Body |
|---|---|---|
| ISO 1977 (GSO ISO 1977:2015) | Bush, plain and flanged roller conveyor chains with solid or hollow pins, attachments, deep plates and sprockets of 6 to 40 teeth | ISO, adopted by GSO |
| Maker's engineering class designation | Welded, cast and engineered steel chains outside ISO 1977 | Chain manufacturer |
| ICV certificate | Suppliers bidding to entities in the National In-Country Value Programme | MoIAT |
| ADNOC or plant owner vendor registration | Supply to oil, gas and state-owned industrial plants | Plant owner |
Complete conveyors are machines with their own safety and conformity requirements; the ECAS and EQM conformity guide explains when MoIAT schemes apply.
UAE conveyor chain is supplied by authorised distributors of chain makers, conveyor engineering firms that build chain to the conveyor drawing, and power transmission stockists for standard ISO 1977 sizes. Engineered elevator and drag chain is usually made to order abroad.
Brands on ListGCC that make conveyor chain include Habasit, whose HabaCHAIN range covers slat top, case and side-flexing chains for packaging and food lines, and Timken, whose Timken Drives business makes engineering class and agricultural conveyor chain. For other makers, ask each supplier for its authorisation and the chain datasheet.
Our guide to sourcing industrial suppliers covers supplier checks. To compare quotes, post your conveyor chain requirement with the drawing attached.
Conveyor chain is priced on weight, heat treatment and attachments, and most engineered chain is made to order, so lead time depends on the factory more than on UAE stock.
Cement and quarry plants should order elevator and drag chain well ahead of planned kiln stops.