Bolts and nuts in the UAE are the hex bolts, screws and matching nuts that clamp machinery, steel frames and flanged joints, sold by thread, length, strength grade and finish. This page lists UAE bolt and nut suppliers and explains how to read property classes, match nuts to bolts, lock a joint, tighten it and choose a finish for coastal air, plus what drives price and lead time as of 2026.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified bolts & nuts suppliers who quote for your order directly.
Tell us about bolts & nuts in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
A bolt and nut is a threaded clamping pair: the bolt stretches slightly when the nut is tightened and the resulting tension holds the joint together. UAE buyers order them for equipment bases, machinery guards, platforms, ducting supports and flange joints, and they sit in the wider range of industrial fasteners and hardware in the UAE. An enquiry is complete only when it names the standard, the strength grade, the thread, the length and the finish.
| Item | Typical UAE use | What to name |
|---|---|---|
| Hexagon head bolt (partly threaded) | Machinery, equipment frames, general maintenance | ISO 4014 or legacy DIN 931, size, length, property class |
| Hexagon head screw (fully threaded) | Tapped holes, thin plates, adjusters | ISO 4017 or legacy DIN 933, size, length, property class |
| Hex nut | Paired with bolts and studs | ISO 4032 or equivalent, class matching the bolt, finish |
| Heavy hex bolts and nuts | Flange bolting, high temperature and pressure piping | ASTM A193 and A194 grades, for example B7 studs with 2H nuts |
| Stainless bolts and nuts | Coastal, washdown and food plant work | ISO 3506 class (A2 or A4) and strength class |
| Locking nuts | Vibration-prone joints | Nylon insert, all-metal prevailing torque, serrated flange types |
Structural frames follow their own bolt systems, covered under structural bolts and fasteners. Stud bolts for flanges are separate: see threaded rods and stud bolts, and load spreading parts are in washers and pins.
A metric bolt marked 8.8 or 10.9 follows ISO 898-1: the first number is the nominal tensile strength in hundreds of MPa (800 MPa for 8.8), and the second is the yield-to-tensile ratio in tenths. Use a nut of equal or higher class, such as class 8 with an 8.8 bolt.
Tighten to a specified preload, not to feel, and use a calibrated tool. Most fastener failures on site come from wrong or unrecorded torque, mixed lubricants and joints that were never retightened after settling.
Torque varies with friction, so a dry bolt and one coated with anti-seize reach different tensions at the same torque. Use the tightening values from the equipment maker or the project specification, and record readings. Calibrated torque wrenches suit normal sizes; large flange work uses hydraulic torque wrenches. Anti-seize and thread compounds belong with lubrication and maintenance supplies. For locking, nylon-insert nuts have a temperature limit, so hot work calls for all-metal prevailing torque nuts or lock wire; vibrating machines may call for lockbolts. Stainless on stainless can gall (seize), so use a thread lubricant and lower speeds.
Coastal air is the deciding factor: plain or zinc-plated carbon steel suits dry indoor use, hot dip galvanizing suits most outdoor steelwork, and A4 (316) stainless suits splash zones, seawater cooling and washdown. Pick the finish by site, not by the drawing alone.
For the full coastal and sour service discussion see the parent page and the pipe fittings and flanges standards guide.
Bolts and nuts in the UAE are bought to international dimensional and strength standards named by the consultant or owner; there is no single UAE product mark for general fasteners as of 2026. Material test certificates carry the proof.
| Requirement | Applies to | Who sets it |
|---|---|---|
| ISO 898-1 and ISO 898-2 | Mechanical properties of carbon and alloy steel bolts, screws and nuts | ISO, named in the purchase order |
| ISO 3506 | Stainless steel bolts, screws and nuts | ISO |
| ISO 10684 | Hot dip galvanized coatings on fasteners | ISO |
| ASTM A193 and A194 | Bolting and nuts for high temperature or pressure service | Piping class and ADNOC group or EPC specification |
| EN 10204 type 3.1 material certificates | Traceability of critical bolting | Project quality plan |
| Municipality and Civil Defence rules | Fire protection and building services fixings | Dubai Municipality, Civil Defence of the emirate |
Choose a supplier that sells traceable, marked product from known mills and can give a material certificate on request. Stockists serve routine maintenance; importers and manufacturers' agents serve project volumes and certified grades.
Related makers include Huck (structural and vibration-resistant lockbolts), Malin Co and WCS (stainless lock wire for securing bolts), and Jet-Lube (anti-seize and thread compounds). To get quotes, post your requirement with the full bolt specification.
Price follows size, grade, finish and certification, and lead time follows whether the item is a stocked standard. No fixed prices apply here.