Blow molded products in the UAE are hollow plastic bottles, jerrycans, drums and IBC inner bottles formed by inflating hot plastic in a mould. This page explains extrusion and stretch blow moulding, resin choice for UAE heat, UN and food-contact rules, suppliers, and what drives price and lead time.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified blow molded products suppliers who quote for your order directly.
Tell us about blow molded products in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Blow molded products are hollow plastic items formed by inflating hot plastic against the inside of a mould. The result is a bottle, jerrycan, drum, tank, duct or housing with a seamless wall. In the UAE the main users are water, dairy, juice, lubricant, chemical and cleaning-product companies, plus industrial buyers of drums and IBC inner bottles.
This page sits within plastic products and fabrication in the UAE and concentrates on the finished hollow products and how to buy them. The machines that make them are covered separately under blow molding machines. If the part is solid or needs fine detail, compare injection molded parts, and for large water or chemical tanks see plastic tanks and containers.
| Process | How it works | Typical product |
|---|---|---|
| Extrusion blow moulding | A molten tube (parison) is clamped in a mould and inflated; scrap forms at the neck and base | HDPE bottles, jerrycans, drums, large containers |
| Injection blow moulding | A preform is injection moulded, then blown; no flash edges and good neck accuracy | Small bottles for pharma and cosmetics |
| Injection stretch blow moulding | A preform is stretched and blown; improves clarity and barrier properties | PET water and beverage bottles |
An Open University description gives container sizes from 0.1 to 250 litres and notes that stretching improves crystallinity, orientation, clarity and barrier properties. Hollow items with almost any shape are possible, provided they have no handle formed through the body.
Start from the contents and the climate, then pick material, size and closure. HDPE is the standard for chemicals, lubricants and milk, PET for clear beverage bottles, and polypropylene for hot-fill or higher temperature needs. Multilayer walls add barrier layers for oxygen-sensitive products.
Wall thickness is the main cost and strength lever. Thin walls save resin but dent in warehouse stacking and crack when dropped. Neck finish and closure compatibility decide whether caps seal; specify the neck standard, torque and liner in the order. For tamper evidence and child resistance, state the requirement early.
Greif describes its PC Series plastic drums as extruded blow-molded high molecular weight HDPE, in 15 to 55 gallon sizes. Schütz states that its inner bottles for IBCs are produced on multi-layer extrusion blow moulding systems, with a Green Layer version using recycled HDPE in the middle layer and virgin HDPE on contact surfaces. For hazardous goods, the container must be UN-approved for the packing group, so ask for the UN marking, not only a general statement.
Containers stored in a hot yard or warehouse expand, creep and can bulge when filled with volatile liquids, so leave headspace and vent where needed. Sunlight degrades unprotected polyethylene over months, so outdoor storage needs UV-stabilised resin or shade. Pigments and carbon black give some protection, and clear PET is rarely suitable for long outdoor exposure.
Humid air matters for labels and cartons more than for plastic bottles, but moisture in resin before processing matters to makers of PET. Dust and sand can scratch glossy surfaces and clog vents, so ship and store containers with closures fitted and pallets wrapped. If products are hot-filled, check that the resin and wall design can handle the temperature without distortion.
The rules depend on the use. Food and beverage containers need food-contact compliance; dangerous goods containers need UN approval; and products on the shelf follow product conformity. The UAE is also tightening rules on single-use plastic, so confirm current requirements for any carrier bags, bottles and caps you plan to sell.
| Use | What to ask for |
|---|---|
| Food and drink bottles | Food-contact compliance statement for the resin and colourant |
| Chemical and lubricant drums | UN marking and packing group suitability |
| Cleaning and personal care bottles | Closure performance, compatibility with the formula |
| Imported containers | Conformity paperwork described in the ECAS and EQM guide |
UN-rated packaging is tested for drops, stacking and leakproofness, and liquids packagings also face internal pressure tests. Always confirm the exact test levels and markings against the current UN or transport regulation for your shipment; do not rely on a general description.
Ask for samples from the production mould, not a hand-made prototype. Weigh several, since weight variation shows process control, and cut one open to check wall thickness around the base, shoulder and handle area, where thinning is common. Fill samples with your product, fit the real closure and torque it, then run a drop test, a stacking test at warehouse height and a leak check after a few days at elevated temperature.
For food and drink, request the resin supplier's food-contact declaration and confirm the colourant is covered. For dangerous goods, test only against the approved marking. Record the approved sample as the master, and keep it with the supplier so later batches can be compared against it. These checks cost little compared with a failed pallet in a July warehouse.
UAE directory listings show bottle makers and extrusion blow moulders in Sharjah and other emirates, serving water, juice and household products. Some brand owners are bringing blow moulding in-house: in May 2026 Al Ain Farms and Borouge signed an MoU under which Borouge will support the dairy group's planned move into in-house blow moulding and supply HDPE resin for its caps and closures unit.
For industrial packaging, Schütz makes IBCs with blow-moulded inner bottles, Greif makes blow-molded plastic drums, and Time Technoplast lists plastic drums, polycans and intermediate bulk containers with plants described as serving the Gulf. More choices are on the IBCs and drums page.
Resin price and weight per container are the biggest cost items, so a few grams saved per bottle matter over a large run. Mould cost is the other major item and is paid up front, so low volumes are expensive per piece. Stock bottles and drums ship quickly; custom shapes need design, mould making and trials. Ask for minimum order quantity, mould ownership and who holds the tool.
Use a posted requirement with the capacity, neck finish, resin and annual volume to compare makers.