Bevel gearboxes in the UAE turn a drive through 90 degrees using conical gears, and most are sold as helical-bevel or spiral bevel units and gearmotors for conveyors, cooling tower fans, mixers and hoists. This page lists UAE bevel gearbox suppliers and explains types, sizing for summer heat, approvals, brands and what sets price and delivery.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified bevel gearboxes suppliers who quote for your order directly.
Tell us about bevel gearboxes in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
A bevel gearbox is a speed reducer or direction changer whose gears sit on intersecting shafts, usually at a right angle, so the motor can lie beside a machine instead of in line with it. It is one of the four main designs in gears and gearboxes for UAE plants, and the one chosen when space or layout rules out an inline unit.
Pure bevel stages cannot give large ratios, so industrial units combine a bevel stage with helical stages. SEW-EURODRIVE, for example, describes its three-stage K series helical-bevel gear units as running from K37 to K187 with a hollow shaft that can be keyed, shrink-disc or splined mounted, and an ATEX version for explosive atmospheres.
| Type | Typical UAE use | What to specify |
|---|---|---|
| Helical-bevel gear unit or gearmotor | Belt and screw conveyors, packaging lines, agitators | Power, output speed, shaft arrangement, hollow or solid output |
| Spiral bevel gear unit | Cooling tower fan drives, machine tools, high-speed right-angle drives | Ratio, input speed, thermal rating, backstop if needed |
| Straight bevel box or miter box | Line shafts and simple 1:1 or low ratio direction changes | Ratio, shaft sizes, mounting |
| Large industrial bevel-helical unit | Cement, aluminium, port and mining drives | Service factor, cooling, lubrication system |
Spiral teeth engage gradually and run quieter than straight teeth, but add axial thrust that bearings must carry. Straight bevel gears are cheaper and simpler for moderate speeds. When the layout allows an inline motor, compare helical gearboxes, and for very high torque in a small envelope see planetary gearboxes.
Size first on torque and service factor, then check thermal capacity at the real site ambient. In July a unit on an exposed gantry in Dubai or Abu Dhabi often fails the thermal check before it fails the strength check.
SEW-EURODRIVE states that its catalogue nominal data assume +25 degrees Celsius ambient, and that its standard gear units with factory oil are rated for ranges around minus 15 to plus 40 degrees Celsius depending on series. Use up to plus 60 degrees Celsius is possible only when project planning selects suitable lubricants and seals, and the maker recommends a thermal check. State maximum ambient and sun exposure on the enquiry.
As of 2026 a bevel gearbox has no dedicated UAE conformity scheme, so rules come from the buyer's datasheet and from the motor and hazardous area requirements around it.
| Requirement | Applies to | Who calls it up |
|---|---|---|
| AGMA or ISO gear rating with service factor | General industrial bevel and helical-bevel units | Purchaser or consultant |
| ATEX Directive 2014/34/EU | Gear units in explosive atmospheres, such as the SEW K..EDR.. series | Plant owner |
| ECAS-Ex certificate | Gearmotors with electrical motors in explosive atmospheres | MoIAT |
| ICV certificate | Suppliers to participating government and corporate buyers | MoIAT |
The ECAS-Ex scheme under MoIAT covers electrical equipment, so for an Ex gearmotor the motor carries the certificate. The guide to ECAS and EQM product conformity explains the wider scheme. Confirm edition and scope in your project specification.
UAE supply comes from manufacturer subsidiaries with assembly workshops, authorised distributors in Dubai, Sharjah and Abu Dhabi, and service shops that rebuild units. Standard gearmotors are stocked in common ratios; large units are built to order and shipped via Jebel Ali.
Brands on ListGCC that make bevel or helical-bevel units include SEW-EURODRIVE, NORD Drivesystems, Flender, Bonfiglioli and Rossi. Check each maker's own range for your ratio and size. For vetting steps see the supplier sourcing guide for the UAE and Saudi Arabia. For light-duty right-angle jobs, worm gearboxes are a cheaper but less efficient alternative.
To get quotes against one datasheet, post your requirement for bevel gearboxes with power, ratio, mounting, shaft arrangement and ambient.
Most failures come from heat, contaminated oil and shaft misalignment rather than from the gears themselves. Check sump temperature, oil colour and seal condition at every shutdown, and log them so a rising trend is visible before a bearing goes.