Aluminium extrusions in the UAE are profiles pressed from heated aluminium billet and cut to length for windows, curtain walls, solar frames, transport and industrial structures. This page explains alloys, tempers, finishes and dies, how UAE billet supply affects delivery, and how to compare extruders, stockists and fabricators.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified aluminum extrusions suppliers who quote for your order directly.
Tell us about aluminum extrusions in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
How to specify powder coating for aluminium and steel in the Gulf: powder chemistries, QUALICOAT and AAMA, licensed coaters in the UAE and Saudi Arabia, colour control and a coater audit checklist.
An aluminium extrusion is a profile made by pushing a heated aluminium billet through a shaped die, giving a constant cross-section that can be cut, drilled, bent, welded and finished. Extrusions are one form within the aluminium products category for the UAE, beside aluminium bars and rods, aluminium coils and aluminium sheets and plates. In the UAE the largest user is construction: window, door and curtain wall frames, louvres, shopfronts, handrails and cladding supports. Industrial buyers use T-slot and machine framing, heat sinks, solar mounting rails, truck and trailer sections and signage frames.
| Product type | Typical UAE use | Specify on the order |
|---|---|---|
| Architectural profiles | Windows, doors, curtain wall mullions and transoms, facade fins | Die number or drawing, alloy and temper, finish, thermal break |
| Industrial profiles | Machine frames, conveyor rails, enclosures, heat sinks | Section drawing, tolerance standard, machining allowance |
| Hollow and structural sections | Truck bodies, scaffolding, walkways, solar structures | Wall thickness, mechanical properties, welding approval |
| Tubes and flats | Handrails, furniture, ducting supports | Section size, length, surface finish |
The UAE presses aluminium close to where it is cast. Emirates Global Aluminium runs smelters at Jebel Ali in Dubai and Al Taweelah in Abu Dhabi, and EGA's operations page lists primary aluminium among its products. CRU reports that both sites produce ingot, billet and primary foundry alloys. Al Taweelah was damaged in March 2026 and restarted in phases: by 2 July 2026 CRU counted 89 of 1,262 cells running, with full recovery expected to take up to a year. A later CRU teaser dated 22 October 2026 reported 631 cells restarted, with full production expected in the first quarter of 2027. Billet shipments fell in the first quarter of 2026, so ask your extruder how billet is being sourced.
Extruders are concentrated in Dubai, Sharjah, Ajman and Abu Dhabi. Gulf Extrusions, founded in 1976 and part of Al Ghurair, states a production capacity of 90,000 metric tons a year and serves architectural, automotive, transportation, industrial and structural uses. Hydro also supplies extrusions and building systems into the Gulf.
An extrusion order needs an alloy, a temper and a finish. Temper designations come from EN 515, which covers all forms of wrought aluminium and aluminium alloys and was confirmed in September 2022. Mechanical limits for extruded rod, bar, tube and profiles come from EN 755-2. Note that the 2016 edition is withdrawn effective July 2025 and has been superseded by EN 755-2:2025, so make sure the drawing cites the current edition.
Mill finish is bare. Anodised and powder coated profiles are the norm for facades, and QUALICOAT states that its specifications set minimum requirements for plant, coating materials and finished products in architectural applications, with a quality label awarded to coaters that meet them. For UAE coastal projects ask the coater for the coating system approval, pretreatment type and warranty terms.
Aluminium does not rust, but the finish is what meets the climate. Intense UV, summer surface temperatures and salty coastal air in Dubai, Sharjah and Abu Dhabi fade and chalk poorly specified powder coats, and chloride attack shows as pitting under damaged anodising. Thermal movement is large, so facade frames need expansion allowance. Dust and sand abrade finish during installation and cleaning.
As of 2026, extrusions are specified to European or project standards rather than a dedicated UAE product mark, and building projects add local authority and Civil Defence rules on the finished systems. Confirm with your supplier whether the product's customs code falls under a MoIAT technical regulation, and see the ECAS and EQM guide.
| Requirement | What it covers | Who asks for it |
|---|---|---|
| EN 515 | Temper designations for wrought aluminium | Extruders, fabricators |
| EN 755-2 (current edition) | Mechanical properties of extruded rod, bar, tube and profiles | Structural and OEM buyers |
| QUALICOAT or equivalent approval | Coating quality for architectural use | Facade consultants |
| Mill or extruder test certificate | Alloy, temper and mechanical results | Contractors, engineers |
Pick by what you are buying: an existing die from stock, a custom die, or finished and coated lengths. An extruder with its own presses and finishing line controls lead time on custom sections. A stockist sells standard angles, tees, channels and flats from stock, and a fabricator buys profiles to make frames. Ask for die ownership terms, since the buyer often pays for the die and may need it released to another press.
Stockists in Sharjah, Dubai Industrial City and Musaffah typically carry standard sections, and custom runs usually carry a minimum weight per press. Post your requirement with a drawing to compare extruders and stockists.
Price follows the metal price plus a conversion charge for pressing, finishing and cutting. Section weight, alloy, finish, die cost and order quantity set the conversion. Lead time is short for stocked mill-finish sections, longer for a new die and coated custom runs. Check when the supplier last ran your die and how billet is currently sourced.