Acetylene in the UAE is supplied as dissolved acetylene in returnable cylinders for oxy-fuel cutting, brazing and flame heating in workshops, shipyards and construction sites. This page lists UAE acetylene suppliers and explains how the cylinder works, how to store and use it safely in summer heat, the inspection standard and site rules that apply as of 2026, and what drives price and delivery.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified acetylene suppliers who quote for your order directly.
Tell us about acetylene in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Acetylene is the fuel gas used with oxygen for cutting, welding, brazing and flame heating, and UAE workshops buy it almost entirely as dissolved acetylene in returnable cylinders. It sits within the industrial gases family for the UAE, which compares all the main gases and supply modes; this page goes deeper on the acetylene cylinder itself, how to handle it in heat, and what to check before you sign a supply account.
Acetylene is not stored like other compressed gases. The UK Health and Safety Executive (HSE) describes the cylinder as a steel shell holding a porous mass, with the gas dissolved in acetone that the mass absorbs. That design keeps the gas stable in transport, but it also sets limits on how fast you can draw gas and how you must store the cylinder.
| Supply form | Typical UAE user | What to check |
|---|---|---|
| Single dissolved acetylene cylinder | Fabrication shops, maintenance crews, HVAC and refrigeration brazing, shipyard repair | Cylinder size, test date and stamp, valve type, rental terms |
| Cylinder pairs on a trolley with oxygen cylinders for cutting | Site cutting and heating on construction and shutdown jobs | Flashback arrestors on both regulators, hose condition, chain or strap |
| Manifolded cylinders or bundles | Workshops with several torches or long heating cycles | Manifold designed for acetylene, withdrawal rate per cylinder, arrestors at outlets |
Hardware matters as much as the gas. Regulators, flashback arrestors and hoses are listed under gas cylinders, valves and regulators, and fixed manifolds and pipework under gas distribution systems for workshops and plants. Where a job only needs heat and not the hottest flame, many UAE fabricators compare acetylene with propane or LPG, which is covered as a fuel on the petroleum products page.
Heat is the main hazard: HSE guidance says decomposition of acetylene in the cylinder is triggered by heat, such as a fire, scorching from a torch, or a flashback. In UAE summers a cylinder parked in direct sun on a yard in Mussafah or Jebel Ali gets far hotter than the air, so shade and ventilation are not optional.
Dust from desert sites can enter an open valve outlet, so keep caps on until the regulator goes on. Fit fixed or portable gas detection in enclosed stores and workshops where cylinders are kept indoors.
As of 2026, acetylene cylinders in the UAE are built, filled and retested to international standards adopted by the gas company, while site handling follows the client's HSE rules and the supplier's procedures. No UAE federal technical regulation dedicated to industrial acetylene cylinders appeared in the sources checked in October 2026, so confirm the current MoIAT regulated products list, and ask your emirate's civil defence authority about permitted storage quantities.
| Requirement | Applies to | Who sets or checks it |
|---|---|---|
| ISO 10462:2013 (with Amendment 1, 2019) | Periodic inspection and maintenance of acetylene cylinders with and without solvent, up to 150 litres water capacity | ISO, applied by the gas company's test station |
| Supplier filling and handling procedures | Cylinder fill, porous mass checks, valve and cap condition before dispatch | Gas supplier |
| Owner and contractor HSE specifications | Hot work permits, cylinder storage on site, arrestor and hose inspection | ADNOC companies, EPC contractors, free zone authorities and the site owner |
| Fire safety approval for premises and stores | Storage of flammable gas cylinders in buildings and yards | Civil defence authority of each emirate (confirm current rules) |
Acetylene cylinders cannot be pressure tested like ordinary gas cylinders because of the porous mass, which is why they have their own inspection standard rather than the seamless cylinder retest standard covered on the family page. Ask the supplier for the inspection date on each cylinder and its procedure after a flashback, since HSE notes that repeated flashbacks can damage the porous mass.
Choose an acetylene supplier on cylinder condition, delivery cover and safety support rather than on the price of the gas alone. In the UAE, acetylene comes from the regional gas companies that fill their own cylinders and from welding distributors that exchange them. Gulf Cryo lists acetylene among its industrial gases and the UAE among its ten countries of operation; other gas companies and their merchant distributors are described on the family page.
Many fabrication shops buy acetylene on the same account as welding wire, rods and brazing alloys, and as argon for TIG work, which is covered on argon shielding gas in the UAE. Our guide to vetting industrial suppliers in the UAE and Saudi Arabia covers trade licence and reference checks. To get quotes from several suppliers, post your acetylene requirement with cylinder size, monthly use and delivery location.
The cost of acetylene in the UAE is driven mostly by cylinder rental, delivery and exchange frequency, not by the gas. A slow user can pay more in monthly rental than in gas.
Filled cylinders are normally available within days from local filling stations. A manifold or fixed pipework needs design and installation time before the first exchange.