Carbon steel plates in Saudi Arabia are flat hot-rolled steel products of 3 mm and above, bought for storage tanks, pressure vessels, structural fabrication, machine bases and wear parts across the Kingdom. This page covers the grades and conditions Saudi buyers specify, how tolerance and cutting are ordered, how SASO rules and client approvals apply as of 2026, and what moves price and delivery.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified carbon steel plates suppliers who quote for your order directly.
Tell us about carbon steel plates in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Saudi buyers order carbon steel plate in structural, high-strength, pressure-vessel, normalised and abrasion-resistant grades, and the grade on the purchase specification governs weldability and approval. Plate is one of the four product forms in the carbon steel category for Saudi Arabia, whose parent page covers the low-temperature and sour-service side. This page deals with the product and how it is bought.
| Grade family | Typical designations | Typical Saudi use |
|---|---|---|
| General structural | ASTM A36, A283, EN 10025-2 grades | Base plates, platforms, skids, brackets, equipment frames |
| High-strength low-alloy | ASTM A572 Grade 50, S355 series | Heavy frames, crane and plant structures |
| Pressure vessel carbon plate | ASTM A516 Grades 60, 65, 70 | Vessels and exchangers in refineries and petrochemical plants |
| Normalised and quenched and tempered | A537 Class 1, A514, S355N | Impact-tested and heavy-duty parts, tank shells in cold or loaded duty |
| Abrasion resistant | 400, 450 and 500 Brinell classes | Mining, cement and aggregate wear parts |
Nucor, which publishes its plate grades, lists A36, A572-50, A516-70, A588 and S355N among them and describes quenched and tempered plate as high-strength, wear-resistant plate made by rapid cooling and controlled reheating. The size range it states, 3/16 inch to 18 inch thick, shows how wide the product is. A buyer should read "plate" in Saudi enquiries as a family and always write the designation in full.
Related products have their own pages: thinner flat product in carbon steel sheets and coils, stock in carbon steel bars and rods, and pipe in carbon steel pipes. Sections are under steel beams and columns, and underlying decks in steel decking.
Saudi Arabia does not yet have a large plate mill in operation as far as public sources show, so plate supply leans on imports. In May 2023 MEED reported a proposed steel plate manufacturing facility at Ras al-Khair with a projected capacity of up to 1.5 million tonnes a year, involving Aramco, the Public Investment Fund and a Chinese steelmaker. No source confirming that the plant has been built was found, so treat it as a proposal and check current news before relying on it.
Until local plate arrives, Saudi buyers draw on imported mill product landing at King Abdulaziz Port in Dammam, Jubail Commercial Port, Yanbu and Jeddah Islamic Port, then sold by distributors and service centres that cut it to size in Dammam, Jubail, Riyadh and Jeddah. Ask each supplier for its mill of origin and heat numbers, and whether the plate is already in a Saudi yard.
Order by grade, thickness, width, length, tolerance class, condition and edge type. EN 10029 sets tolerances on dimensions and shape for hot-rolled non-alloy and alloy steel plates from 3 mm to 400 mm thick and 600 mm wide or more, excluding stainless steel, chequer plate and wide flats; use it, or the ASTM equivalent in your project, instead of accepting the mill default.
Service centres commonly offer plasma, oxy-fuel and laser cutting, shearing, bending, drilling, blasting and priming. For tank and vessel work on the Eastern Province, buyers often take cut and bevelled plate so welding can start on delivery. Ask for the heat number to be marked on each cut piece. Fabrication partners are under tank fabrication, pressure vessel fabrication and structural steel fabrication.
As of 2026, the SASO Building Materials technical regulation Part 1 covers metals and alloys used in construction, and plate for project use is governed above all by the client specification and Aramco or EPC approval. SASO's notice on Part 1 lists low-alloy steel bars, carbon steel bars, steel wire mesh and steel sheets among its products and does not explicitly mention plates, with mandatory application from 26 June 2020. Whether your plate falls under SABER conformity depends on its HS code and end use, so check with SASO or an accredited body.
| Requirement | Applies to | Authority or source |
|---|---|---|
| Building Materials technical regulation, Part 1 | Metals used in construction; check product scope | SASO |
| SABER product and shipment certificates | Regulated products, depending on HS code | SASO via accredited bodies |
| Mill test certificate, EN 10204 type 3.1 or 3.2 | Structural and pressure plate | Specification, third-party inspector |
| Approved vendor and material standards | Aramco, SABIC and EPC projects | Client specification and vendor lists |
| Tolerance standard (EN 10029 or ASTM equivalent) | All plate orders | Purchase specification |
EN 10025-2 specifies delivery conditions for hot-rolled non-alloy structural steels and excludes hollow sections and tubes, so name the part of the standard on the order. Our SASO and SABER certificate guide shows the certificate sequence.
Plate reaches Saudi buyers through importers, distributors and service centres. Brands that make plate include Nucor, whose plate range spans A36 to quenched and tempered and abrasion-resistant types; Hyundai Steel, which lists plate among its product categories; and JSW Steel, whose hot-rolled range covers coils, plates and sheets for heavy fabrication and infrastructure.
Weldability decides the next purchases: see welding consumables. For corrosive duty see stainless steel, and for high-temperature chromium-molybdenum grades alloy steel. Our sourcing guide for the Gulf explains how to check distributors. Buyers who have a cutting list can post your requirement to compare quotes.
Price follows global plate and slab prices, grade, thickness, size, processing and certification, and lead time follows whether the plate is in a Saudi yard. Common structural sizes in stock ship quickly; wide, thick, normalised, impact-tested, quenched and tempered and wear-resistant plate is made to order.
Cutting, bevelling, blasting and priming add time, as do witnessed testing and inland transport from Dammam or Jubail to Riyadh or the project site. Compare quotes on the delivered, processed price with certificates included.