Alloy steel in Saudi Arabia is mostly chromium-molybdenum pipe, plate and forgings (P11, P22, P91) for refinery, petrochemical and steam service, with A193 B7 bolting, tool steel and spring steel. This page lists Saudi alloy steel suppliers and covers grade choice for heat and hydrogen, heat treatment and hardness control, sour service bolting, Aramco and SASO rules, and cost drivers.
0 suppliers found · 4 subcategories
Skip the search. Post your requirement and we'll connect you with verified alloy steel suppliers who quote for your order directly.
Tell us about alloy steel in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Saudi plants buy alloy steel mainly as chromium-molybdenum pipe, plate and forgings for refineries, petrochemical crackers and steam systems, together with alloy bolting, tool steel for workshops and spring steel for machinery. ListGCC places it in the steel products category in Saudi Arabia, next to Saudi carbon steel suppliers and Saudi stainless and duplex steel.
The table shows the four alloy steel groups and the specifications that usually appear on Saudi material requisitions.
| Product | Specification | Saudi applications |
|---|---|---|
| Alloy steel pipes in Saudi Arabia | ASTM A335 seamless ferritic alloy pipe: P11, P22, P91 | Refinery furnace and reactor piping in Jubail, Yanbu and Ras Tanura, utility steam lines |
| Cr-Mo alloy steel plates | ASTM A387 Grades 11, 22, 91 for welded boilers and pressure vessels at elevated temperature | Reactors, drums, exchanger shells |
| Tool steel for Saudi workshops | ASTM A681 | Dies, punches, moulds, cutting and forming tools |
| Spring steel | EN 10089 for hot-rolled steels for quenched and tempered springs | Machinery, valve and vehicle springs |
Cr-Mo forged flanges and fittings are ordered to ASTM A182 in matching grades, through Saudi flange suppliers.
Saudi engineers move from carbon steel to Cr-Mo when temperature, hydrogen partial pressure or design life exceed what carbon steel allows, then pick the lowest grade that covers the duty. The project piping class fixes the cut-over points; the buyer's job is to supply exactly what it names.
Hydroprocessing units in Saudi refineries run hydrogen at high temperature and pressure. API RP 941 (consolidated edition 8, August 2020) is the reference for operating limits of steels in this service, and Aramco and licensor material selection diagrams rely on it. A grade downgrade on a hydrogen line can lead to internal damage that is hard to detect, so substitutions need engineering approval.
Grade 91 combines about 9% chromium and 1% molybdenum, and ASTM A387 makes it available only as Class 2, with a Type 2 variant using restricted chemistry for better creep resistance. Its properties come from heat treatment, so the order must ask for the normalize and temper record on the certificate, and fabricators must keep PWHT charts and hardness readings for every weld. Hardness acceptance values come from the governing code edition and the owner specification.
Turnarounds in Jubail and Yanbu bring large volumes of P11, P22 and P91 spool pieces on site at once. Segregated storage, heat number tracking and positive material identification of every component before installation are what stop a carbon steel elbow ending up in a P22 line.
Low-hydrogen electrodes and fluxes for Cr-Mo welding absorb moisture quickly in Eastern Province humidity; heated storage and rebaking rules belong in the welding procedure.
Tool and spring steels are bought for hardness and fatigue life rather than temperature. ASTM A681 covers wrought alloy tool steel supplied as bar, plate, sheet, strip, rod, wire or forgings that are made into tools, dies and fixtures, and EN 10089 sets delivery conditions for hot-rolled spring steels that are formed and then quenched and tempered. Order them in the annealed condition when the part will be machined first, state the final hardness on the drawing, and ask the supplier whether heat treatment is included or left to your shop.
Standard Saudi flange bolting is ASTM A193 Grade B7 studs with A194 Grade 2H nuts, for high-temperature or high-pressure service. A193 covers alloy and stainless bolting for vessels, valves, flanges and fittings, and A194 forbids grade substitution without the purchaser's permission.
Where flanges are in sour service, or bolting is insulated or buried and can see H2S, Saudi owner specifications switch to B7M studs and 2HM nuts, tempered and hardness tested so they stay within ISO 15156-2 limits (often quoted as 22 HRC; check the specification you are working to). Cold service, such as ethane and NGL lines, uses ASTM A320 bolting for low-temperature service. Suppliers are listed under industrial fasteners and hardware in Saudi Arabia and Saudi bolts and nuts.
For process plants, alloy steel acceptance in Saudi Arabia comes from owner specifications, design codes and approved-manufacturer lists rather than a SASO product approval, as of 2026; import paperwork still depends on the HS code on SABER.
| Requirement | Applies to | Authority or owner |
|---|---|---|
| ASTM A335, A387, A182 | Cr-Mo pipe, plate and forgings | Piping class and vessel datasheet |
| ASTM A193, A194, A320 | Alloy bolting and nuts | Flange and bolting specifications |
| ASME B31.3 (2024) | Materials, fabrication, heat treatment and examination of process piping | Aramco, SABIC affiliates, EPC contractors |
| API RP 941 | Steels in hydrogen service | Refinery and licensor material selection |
| ISO 15156-2:2020 | Low-alloy steel in H2S service, including hardness | Sour service specifications |
| SABER product and shipment certificates | Imports whose HS code is on a regulated list | SASO |
| Aramco approved manufacturer and IKTVA | Eligible mills and local content | Saudi Aramco |
Our SASO and SABER guide explains the certificate process, and the fittings and flanges standards guide shows how Cr-Mo fittings pair with pipe. Cr-Mo fittings are listed under Saudi pipe fittings and flanges, and the plant that uses them under refinery equipment in Saudi Arabia.
Saudi buyers get Cr-Mo pipe and plate mostly through mill orders placed directly or via authorised agents, with stockholders in Dammam, Jubail and Yanbu carrying common P11 and P22 sizes, fittings and B7 bolting for shutdown work. Tool and spring steel are sold by specialist distributors, often with cutting and heat treatment.
Alloy steel brands on ListGCC include NKK seamless alloy pipe and boiler tubes from JFE Steel and BKL butt-weld fittings in carbon and alloy steel. Confirm that the mill appears on the Aramco or owner approved list for the product before relying on a quote.
The sourcing guide for Saudi and UAE buyers covers supplier verification. For quotes on a Cr-Mo or bolting list, post your requirement on ListGCC with grades, sizes, tests and certificate type.
Cost rises with chromium and molybdenum content, heat treatment and testing, and lead time with how few mills make the grade and size; shutdown timing in Saudi plants also concentrates demand.