Power Transformers Suppliers, UAE

Power transformers operate at voltage levels above 36 kV and are used in generation switchyards, transmission substations, and large industrial facilities for stepping voltage up or down between transmission and distribution networks. In the GCC, power transformers serve DEWA, ADDC, SEC, and independent power producer substations, often operating under extreme heat that demands enhanced cooling systems. Procurement involves long lead times, specialized transport logistics, and rigorous factory acceptance testing.

0 suppliers found

Active:3.5+ stars ISO 14001 ASME API Clear all

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Request Quotes Clear all filters

Post your requirement, get quotes from multiple suppliers

Tell us about power transformers in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

Power transformers are the high-capacity workhorses of electrical transmission networks, handling voltage transformation at levels from 33 kV up to 400 kV and beyond. In the UAE and Saudi Arabia, these units form the backbone of national grid infrastructure operated by TRANSCO, SEC, and independent power and water producers.

Ratings for GCC power transformers typically range from 10 MVA to over 500 MVA, with common voltage classes of 132/33 kV, 220/33 kV, and 380/132 kV. Oil-immersed designs with ONAN (oil natural, air natural) or ONAF (oil natural, air forced) cooling dominate the regional market, although some indoor substations specify dry-type or ester-filled units for fire safety.

Critical procurement specifications include no-load losses, load losses (evaluated over the transformer's lifetime using total cost of ownership formulas), impedance voltage, temperature rise limits, and noise level. The extreme GCC ambient temperatures require transformers designed for a maximum ambient of 50 degrees Celsius or higher, with associated derating of nameplate capacity at elevated temperatures.

Buyers should plan for 9 to 18 month lead times from order to site delivery. Transportation logistics in the Gulf often require special trailers, route surveys, and port crane coordination for units weighing 50 to 200 tonnes. Specify comprehensive factory acceptance tests including ratio, impedance, losses, insulation resistance, dissolved gas analysis of oil, and impulse voltage testing. On-site commissioning should include oil filtration, vacuum filling, and energization tests per IEC 60076 series.

Frequently Asked Questions — Power Transformers

What lead times should we expect for power transformers in the GCC?

Standard power transformers take 9 to 18 months from order confirmation to site delivery. For urgent requirements, some Middle East manufacturers in Saudi Arabia, UAE, and Egypt can deliver in 6 to 9 months. Always factor in 2 to 4 weeks for shipping and customs clearance, plus transport from port to site.

How do GCC ambient temperatures affect power transformer ratings?

Power transformers rated per IEC 60076 assume a maximum ambient of 40 degrees Celsius. In the GCC where ambient temperatures reach 50 degrees Celsius or higher, the transformer must be oversized or specified with enhanced cooling (ONAF or OFAF). Request nameplate data that explicitly states the rated output at 50 degrees Celsius ambient.

What tests should we witness during factory acceptance of a power transformer?

Essential FAT tests include turns ratio, winding resistance, impedance voltage, no-load and load losses, applied voltage and induced voltage insulation tests, lightning impulse test, and oil quality analysis. For transformers above 100 MVA, also witness temperature rise tests and frequency response analysis for transport damage benchmarking.