Metal Roofing Sheets Suppliers, UAE

Metal Roofing Sheets are profiled or standing-seam steel or aluminium sheets used as the primary waterproofing and structural spanning layer in GCC building roofs. They are the default roofing material for industrial, commercial, and low-rise buildings across the UAE and Saudi Arabia due to their long spans, lightweight, rapid installation, and durability in the Gulf climate. Regional roll-forming facilities produce a wide range of profiles from pre-painted coil stock.

0 suppliers found

Active:Verified ASME API CE Marking Clear all

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Request Quotes Clear all filters

Post your requirement, get quotes from multiple suppliers

Tell us about metal roofing sheets in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

Metal roofing sheets are cold-formed from galvanised, Galvalume (aluminium-zinc alloy coated), or pre-painted steel coils into trapezoidal, corrugated, or standing-seam profiles. Sheet thicknesses typically range from 0.47mm to 0.70mm BMT (base metal thickness), with profile depths from 25mm to 150mm determining spanning capability and load-carrying capacity. Standing-seam systems with concealed fixings are specified for premium projects requiring superior weather-tightness and aesthetics.

In the UAE and Saudi Arabia, metal roofing sheets are used on warehouses, factories, shopping centres, exhibition halls, airport terminals, and mosques. Specification priorities include substrate coating (Galvalume AZ150 or AZ185 is standard for Gulf conditions), paint system (PVDF or SMP coatings for long-term colour retention), solar reflectance index (SRI — high-reflectivity cool roof coatings reduce building cooling loads by 10 to 20 percent), and profile selection matched to the structural purlin spacing.

GCC roofing sheet suppliers include Zamil Steel, Al Jazeera Steel, Gulf Steel Industries, and numerous regional roll-forming operations producing to ASTM A653, BS EN 10346, or equivalent. Buyers should specify maximum sheet lengths (up to 15 metres is feasible for transport and handling), end-lap versus continuous sheet detailing, and compatible accessories including ridge caps, flashings, gutters, and fasteners. Lead times for standard profiles from regional stock coil are typically 1 to 3 weeks, with custom colours requiring 4 to 8 weeks for coil import.

Frequently Asked Questions — Metal Roofing Sheets

What is Galvalume and why is it preferred for roofing in the GCC?

Galvalume is an aluminium-zinc alloy coating (typically 55 percent aluminium, 43.4 percent zinc, 1.6 percent silicon) applied to steel sheets. It offers 2 to 4 times the corrosion resistance of standard hot-dip galvanising in the Gulf's salt-laden and high-temperature environment, making it the standard substrate for metal roofing in the UAE and Saudi Arabia.

What is a cool roof and does it help in the Gulf climate?

A cool roof uses high-reflectivity, high-emissivity coatings (typically light-coloured PVDF paints) that reflect solar radiation and emit absorbed heat, reducing roof surface temperatures by 20 to 30 degrees Celsius compared to standard dark roofs. This translates to measurable reductions in building cooling energy consumption, which is particularly valuable in the GCC where cooling represents the largest energy cost.

Should I use standing-seam or trapezoidal profile roofing sheets?

Standing-seam systems provide superior weathertightness with no exposed fastener penetrations, making them ideal for low-slope roofs and premium buildings. Trapezoidal profiles with through-fixed screws are more economical and faster to install, suitable for standard industrial and commercial buildings. The choice depends on roof slope, budget, aesthetic requirements, and long-term maintenance preferences.