Glass Curtain Walls Suppliers, UAE

Glass Curtain Walls are non-structural glazed facade systems that enclose high-rise and commercial buildings, providing natural daylight, views, and architectural expression while resisting wind, rain, and thermal loads. The GCC's iconic skylines in Dubai, Abu Dhabi, and Riyadh are defined by curtain wall facades, making this one of the most technically demanding and commercially significant facade categories in the region. Systems must balance solar control, thermal insulation, and structural performance under extreme Gulf conditions.

0 suppliers found

Active:Contractor API Clear all

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Request Quotes Clear all filters

Post your requirement, get quotes from multiple suppliers

Tell us about glass curtain walls in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

Glass curtain walls are aluminum-framed, non-load-bearing facade systems that transfer wind loads to the building's structural frame while providing weathertight enclosure. The main system types are stick curtain walls (assembled on site from components), unitised curtain walls (factory-assembled panels craned into position), and structural glazing systems where glass is bonded to the frame with structural silicone. Unitised systems dominate GCC high-rise construction due to faster installation and better quality control.

Specification of curtain wall systems in the UAE and Saudi Arabia is driven by thermal performance (U-value requirements per Estidama, Al Sa'fat, or SBC energy codes), solar heat gain coefficient (SHGC typically below 0.25 for commercial buildings), wind load resistance (designed for 3-second gust speeds of 45 to 55 m/s), and structural deflection limits. Glazing units are typically double-glazed insulated glass units (IGUs) with low-emissivity coatings and argon gas fill, with triple-glazed units appearing in ultra-high-performance specifications.

Procurement managers should evaluate curtain wall contractors on their design engineering capability, factory production capacity, mock-up testing record (AAMA 501 or BS EN 13830), and installation track record in the Gulf. Major curtain wall suppliers and fabricators in the GCC include Gulf Extrusions, Technal, Schuco, and Permasteelisa (now Lixil). Lead times from design approval to first delivery typically range from 16 to 24 weeks, with unitised panel production rates of 50 to 200 panels per week depending on factory capacity. Performance mock-up testing is mandatory on most GCC high-rise projects and should be budgeted early in the procurement programme.

Frequently Asked Questions — Glass Curtain Walls

What is the difference between stick and unitised curtain wall systems?

Stick systems are assembled piece by piece on site from mullions, transoms, and glass units, suitable for low-rise buildings with regular geometries. Unitised systems arrive as pre-assembled, pre-glazed panels that are craned into position and interlocked, offering much faster installation speeds and better quality — making them the standard for GCC high-rises above 10 storeys.

What glazing specifications help reduce cooling costs in UAE buildings?

Specifying double-glazed IGUs with high-performance low-e coatings (solar control type), argon gas fill, and a solar heat gain coefficient below 0.25 significantly reduces solar heat gain and cooling energy. Tinted or reflective outer panes combined with clear or low-iron inner panes are common configurations for GCC commercial facades.

Is performance mock-up testing required for curtain walls in Saudi Arabia?

Yes, performance mock-up testing is required on most significant commercial and government projects in Saudi Arabia. Testing per AAMA 501 or BS EN 13830 evaluates air infiltration, water penetration, wind resistance, and structural performance. Mock-up testing typically takes 4 to 6 weeks including specimen fabrication and is conducted at accredited laboratories in the GCC or internationally.