Flooring Suppliers, UAE
Flooring in the UAE means the porcelain and ceramic tiles, natural stone, epoxy and industrial resin floors, and vinyl and LVT finishes used in homes, offices, malls, hospitals and factories. This page explains each type and the specification to ask for, how UAE heat, sun, sand and wet areas affect slip resistance and durability, which rules apply, and what moves price and delivery time.
0 suppliers found · 5 subcategories
No suppliers match these filters
Try clearing some filters — or post your requirement and let matching suppliers come to you.
Post your requirement, get quotes from multiple suppliers
Tell us about flooring in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Flooring brands in UAE
Flooring in the UAE covers the tiles, stone, resin and vinyl finishes laid on every floor from a villa majlis to a cold store. It is the largest part of the interior finishes category, usually specified together with wall finishes, paints and wall tiles and suspended ceiling systems in the same finishes schedule. This page explains the five flooring families UAE projects buy, the test standards that describe them, how heat, sun, sand and wet areas affect the choice, the Dubai and federal rules that apply, and what to ask suppliers about price and delivery. Regulatory points were checked in October 2026.
What flooring types do UAE projects use, and how is each one specified?
UAE buildings mostly use porcelain tile in public and residential areas, natural stone in lobbies and prestige spaces, resin floors in car parks, kitchens and plants, and vinyl in healthcare and education. Each family has its own way of stating performance, so ask for the right numbers.
| Flooring type | Where UAE buyers use it | Key spec to ask for |
|---|---|---|
| Ceramic and porcelain floor tiles | Apartments, villas, malls, offices, hotel back of house, terraces | ISO 13006 or EN 14411 group (porcelain is AIa or BIa, water absorption 0.5% or less), slip test result, adhesive and grout class to ISO 13007 |
| Marble, granite and natural stone flooring | Hotel and tower lobbies, mosques, villas, retail podiums | Stone type and finish, thickness, pendulum slip value measured for natural stone, sealing and maintenance needs |
| Epoxy and polyurethane resin floor coatings | Car parks, warehouses, workshops, commercial kitchens, plant rooms | FeRFA type and thickness, chemical resistance, UV-stable topcoat where light reaches the floor |
| Heavy duty industrial floors | Factories in Jebel Ali, KIZAD and Sharjah, food and beverage plants, logistics hubs | FeRFA Type 6 to 8 resin screeds (over 4 mm to over 6 mm), impact, thermal shock and hygiene requirements |
| Vinyl sheet and LVT flooring | Hospitals, clinics, schools, offices, retail fit-outs | Product type (homogeneous, heterogeneous or LVT), wear layer, fire reaction class and slip value from the declaration of performance |
FeRFA, the UK resin flooring association, classifies resin floors into eight types by thickness and duty, from a light duty Type 1 floor seal of about 150 µm, through Type 5 flow applied flooring at 2 to 3 mm, to Type 8 heavy duty resin flooring over 6 mm. Writing the FeRFA type on a UAE tender stops a thin coating being priced against a true screed. Resin floors are usually coordinated with epoxy coatings for steel and concrete and the concrete slab and screed beneath them.
How do you choose flooring for UAE heat, sun, sand and wet areas?
Choose the floor for the wettest and hottest condition it will meet: a lobby that is dry most of the year but wet after cleaning, a terrace in full sun, or a car park ramp with oil and blown sand. Slip resistance, UV stability and installation temperature are where UAE projects most often go wrong.
Slip resistance: read the test, not the label
Tile and stone suppliers in the UAE quote two different tests. The German ramp test (DIN 51130) gives R9 to R13 classes, with R9 the lowest. NBS describes the angle bands as R9 at 6 to 10 degrees up to R13 above 35 degrees, and warns that R9, and sometimes R10, can be unacceptably slippery with some contaminants. The pendulum test gives a pendulum test value (PTV) in dry and wet conditions and can be run on site; UK Slip Resistance Group guidance quoted by NBS treats 36 and above as low slip potential. NBS also says the R scale and PTV are not equivalent, so do not convert one to the other. For pool decks, ablution areas, ramps and building entrances, ask for wet PTV results, and for barefoot areas the DIN 51097 A, B or C rating.
Sun, heat and resin floors
Epoxy yellows in sunlight, so resin floors near glazing, at car park entrances or outdoors need a UV-stable topcoat. Sika's GCC data sheet for Sikafloor-359 AE, for example, describes a non-yellowing polyurethane seal coat for hot and tropical climates that passed 500 hours of accelerated UV weathering (ASTM G154). Heat also shortens working time: Sika's data sheet for its Sikafloor-169 epoxy gives a pot life of 60 minutes at 10 °C but 20 minutes at 30 °C, so summer resin work in the UAE is often scheduled at night or after the air conditioning is running. Sika Sikafloor resin flooring systems and Flowcrete Flowfresh hygienic polyurethane and Peran epoxy floors are listed under epoxy flooring.
Tiles outdoors and large formats
Terraces and podiums heat up and cool down every day, so outdoor tiles need low water absorption, an adhesive and grout class suited to exterior use and enough movement joints. Large porcelain slabs need a flat substrate and full adhesive coverage. Mapei tile adhesives and grouts publish system data for this, and porcelain ranges from RAK Ceramics, a UAE porcelain maker, Atlas Concorde porcelain and 20 mm outdoor pavers, Marazzi technical porcelain and Porcelanosa porcelain and XTONE slabs are listed here.
Sand, cleaning and moisture
Blown sand acts as an abrasive on entrance floors, so specify entrance matting and harder-wearing finishes at doors. Resin and vinyl need a dry slab: check the substrate moisture limit in the primer or adhesive data sheet before laying, and treat ground floors with below-ground waterproofing where groundwater is high. In clinics and schools, Tarkett vinyl and LVT, Forbo vinyl, linoleum and entrance matting, Gerflor safety vinyl and Polyflor safety and homogeneous vinyl offer welded sheet systems that stay cleanable.
Which standards and approvals apply to flooring in the UAE?
For most flooring, the project specification and the building authority's green building rules set the bar, while MoIAT product conformity applies only where a technical regulation covers the product. The table lists what UAE buyers usually meet.
| Requirement | Applies to | Authority or source |
|---|---|---|
| Al Sa'fat Silver level mandatory for every new building since 19 October 2020 (second edition January 2023) | Materials and finishes in Dubai projects, including adhesives and coatings where the edition sets limits | Dubai Municipality |
| ECAS or EQM certificate where a MoIAT technical regulation covers the product | Regulated building products | Ministry of Industry and Advanced Technology (MoIAT) |
| ISO 13006 / EN 14411 classification; ISO 13007 for tile adhesives and grouts | Ceramic and porcelain tiles and their setting materials | International standards named in the specification |
| DIN 51130 ramp test, DIN 51097 barefoot test, pendulum test (PTV) | Slip resistance of tiles, stone, resin and vinyl | Test methods named by the consultant or operator |
| FeRFA resin flooring types 1 to 8 | Epoxy, polyurethane and resin screed floors | Industry classification used in specifications |
Dubai Municipality says Al Sa'fat replaced the Dubai Green Building Regulations and Specifications and that new buildings must reach its Silver level; the detailed materials requirements sit in the edition the project is registered under, so ask the consultant which limits apply to floor adhesives and coatings. For regulated products, our guide to ECAS and EQM certificates explains how to check a certificate with MoIAT. Ask each supplier directly whether any MoIAT regulation covers the product, and why not if it says none.
Who supplies flooring in the UAE?
UAE flooring is sold through tile and stone showrooms that import or represent factories, the regional offices and approved applicators of resin flooring makers, and distributors of vinyl brands who also install. Resin and vinyl floors are only as good as the installation, so most makers work through approved contractors.
Iris Ceramica technical and antibacterial porcelain is another tile brand carried here. Before you award, ask for the slip test report for the exact finish (not the range), the ISO 13006 group and water absorption, a sample panel or mock-up laid on site, the resin system data sheet and the applicator's approval letter from the maker, and the maintenance and cleaning regime that keeps the slip value. Large projects should agree batch and shade control for tiles. Our guide to sourcing suppliers in the UAE and Saudi Arabia covers wider checks, and you can post your flooring requirement with areas and finishes to get comparable quotes.
What drives the price and lead time of flooring in the UAE?
Format, finish and installation scope drive UAE flooring prices more than the material name. The main factors:
- Tile format and body. Large slabs and full-body porcelain cost more to make, ship and lay than standard sizes.
- Surface finish. Anti-slip, structured and polished finishes are separate production runs, and slip-rated outdoor ranges may need to be ordered.
- Resin system thickness. Each step up the FeRFA scale adds material and labour per square metre.
- Stone origin and selection. Block selection, book-matching and wastage drive natural stone cost.
- Stock against import. Common tiles and vinyl are held in stock in Dubai and Sharjah, while specified ranges and stone are imported through Jebel Ali and can take longer.
- Site conditions. Moisture problems, levelling and night work for resin floors add cost and time.
Sources
- Dubai Municipality: Al Sa'fat Dubai Green Building System
- NBS: pendulum, ramp and Tortus slip resistance test methods
- EU-OSHA OSHwiki: measuring slip resistance of floorings and footwear
- FeRFA: resin flooring classification
- Rosa Gres: porcelain stoneware and ISO 13006 / EN 14411 groups
- Sika GCC: Sikafloor-359 AE product data sheet
- Sika: Sikafloor-169 product data sheet
- SASO: Technical Regulation for Building Materials Part 4, Bricks, Tiles, Ceramics, Sanitary Ware and Related Products (Version 2)