Skip to main content

Copper Sheets & Strips Suppliers, UAE

Copper sheets and strips are flat products in ETP (C11000), DHP (C12200), and oxygen-free (C10200) grades used for electrical busbars, roofing, decorative cladding, gaskets, and switchgear components. They combine high electrical conductivity with excellent formability and corrosion resistance. GCC electrical contractors and panel manufacturers source copper sheet stock from specialist importers who maintain inventories in Dubai and Riyadh.

0 suppliers found

CityAll CitiesDubaiAbu DhabiSharjahAjmanRas Al KhaimahFujairah
Filters4 Verified Manufacturer Distributor Trading Co. Contractor 3+ 3.5+ 4+ 4.5+ ISO 9001 ISO 14001 ISO 45001 CE Marking API ASME 5+ yrs 10+ yrs 15+ yrs 20+ yrs
SortRelevanceHighest RatedMost ReviewsNewest
Active:Distributor API ISO 45001 ASME Clear all

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Request QuotesClear all filters

Post your requirement, get quotes from multiple suppliers

Tell us about copper sheets & strips in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

Copper sheets and strips are essential for electrical, architectural, and industrial applications across the UAE and Saudi Arabia. Electrolytic Tough Pitch (ETP/C11000) copper is the standard for electrical components, while DHP (C12200) copper serves plumbing, roofing, and heat exchanger applications. Oxygen-free copper (OFC/C10200) is specified for high-purity electrical and electronic uses.

Thicknesses range from 0.1 mm strips for transformer winding to 10 mm plates for busbar fabrication. Standard sheet sizes include 600 x 1,200 mm and 1,000 x 2,000 mm, while strips are supplied in coils of custom widths. Surface finishes include mill, bright, tinned, and lacquered.

The GCC's ongoing power infrastructure expansion, including high-voltage substations, data centers, and renewable energy installations, sustains strong demand for copper flat products. Procurement managers should specify the copper grade (by UNS or EN designation), temper (soft, half-hard, hard), thickness tolerance, and conductivity requirements. With copper being a high-value material, sourcing from reputable importers in Jebel Ali and Riyadh who maintain proper material traceability and offer certified weigh-bridge measurement is essential for cost control and quality assurance.

Frequently Asked Questions — Copper Sheets & Strips

What is the difference between ETP and DHP copper for sheet applications?
ETP (C11000) has 99.9% purity with minimum 101% IACS conductivity, making it ideal for electrical applications. DHP (C12200) is deoxidized with phosphorus, making it more weldable and suitable for plumbing, roofing, and heat exchanger tubes, though with slightly lower conductivity.
What thickness range is available for copper sheets in the GCC market?
Sheets from 0.5 mm to 10 mm are commonly stocked. Thinner strips down to 0.1 mm are available for transformer and electrical winding applications. Thicker plates above 10 mm may require indent ordering.
How should copper sheets be stored to prevent surface deterioration?
Store in a dry, covered environment away from chemical fumes and moisture. Use interleaving paper between sheets to prevent surface contact marks. Lacquered or shrink-wrapped packaging from the supplier helps preserve surface quality for electrical and decorative applications.