Voltage transformers in Saudi Arabia step high system voltage down to a safe secondary level for meters, protection relays and synchronising equipment in SEC, Aramco and plant switchgear. This page covers inductive and capacitive types, class, burden and voltage factor, IEC 61869-3, SEC and Aramco approval, SABER, and price and lead time.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified voltage transformers suppliers who quote for your order directly.
Tell us about voltage transformers in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
A voltage transformer (VT, or potential transformer) steps a high system voltage down to a safe secondary level for meters, protection relays and synchronising gear. In Saudi Arabia VTs sit in 13.8 kV and 33 kV switchgear, generator panels and outdoor 132 kV, 230 kV and 380 kV substations on the 60 Hz network. They are part of the transformers family for Saudi Arabia and pair with current transformers to give a relay the full picture of voltage and current. The big units they monitor are covered under power transformers.
IEC 61869-3, edition 1.0 dated 13 July 2011, covers new inductive voltage transformers used with measuring instruments and protective devices at 15 Hz to 100 Hz. It replaced IEC 60044-2 and is read with IEC 61869-1:2007.
| Type | Saudi application | Specification focus |
|---|---|---|
| Cast resin VT | 13.8 kV and 33 kV switchgear in plants and utility substations | Voltage, class, burden, voltage factor, fuses |
| Single-pole insulated VT | Phase-to-earth measuring in panels | Insulation level, residual voltage winding |
| Oil or gas-insulated outdoor VT | 132 kV, 230 kV substations | Highest voltage, creepage, cores |
| Capacitive voltage transformer | Higher-voltage lines and 380 kV bays | Capacitance, intermediate transformer, transient response, line carrier |
| Combined CT and VT | Compact HV bays | Ratings of both elements and the combined standard |
| Station service VT | Auxiliary supply from HV systems | Power rating, voltage |
Hitachi Energy lists inductive and capacitive voltage transformers, combined units and station service voltage transformers from 25 kV to 800 kV. A Middle East instrument transformer maker has publicly stated that its inductive and capacitive voltage transformers were approved by the Saudi Electricity Company and National Grid, which shows utilities approve these items type by type. The VT feeds meters on the energy meters and monitoring page and sits in medium-voltage switchgear.
Specify primary and secondary voltage, class, burden, rated voltage factor and insulation level against the network earthing. Errors cause wrong billing, relays that mis-operate, or VTs that overheat in earth faults.
Saudi heat ages resin and fuses in panels, and dust and salt cause surface discharge on outdoor housings. Both act on insulation, not on the transformer core.
Saudi VTs follow IEC 61869 and are accepted by SEC, National Grid SA, Aramco or the consultant. As of 2026 we could not confirm from the sources we opened whether instrument transformers sit on a SABER regulated list, so ask your clearing agent or a SASO-approved body.
| Requirement | Applies to | Authority or owner |
|---|---|---|
| IEC 61869-3:2011 (edition 1.0) | Inductive voltage transformers | IEC, via the specification |
| SEC or National Grid SA product approval | VTs for utility metering and substations | Saudi Electricity Company, National Grid SA |
| Aramco supplier registration and qualification | Supply to Aramco and its contractors | Saudi Aramco |
| SABER product and shipment certificates | Regulated imports | SASO, through certification bodies |
Aramco states that all suppliers must register, that registration does not guarantee future business, and that Saudi-based suppliers register through its e-Marketplace platform. The SASO and SABER guide for industrial equipment explains the two-step certificate process.
Medium-voltage VTs normally come inside switchgear from the panel builder. High-voltage units come from the instrument transformer maker, with approval confirmed for your network.
Ask for type test reports, routine test certificates, polarity marking, fuse provision and evidence of utility approval for the exact model. Our sourcing guide lists vetting steps. To compare offers, post your requirement with voltages, class, burden, insulation level, indoor or outdoor and quantity.
Price follows voltage level, class, winding count and insulation type. MV resin VTs are low-cost, while HV VTs and CVTs are engineered per project.
Freeze voltage factor, burden and class before switchgear drawings are approved to avoid restarting manufacture.