Vibration sensors in Saudi Arabia measure casing and shaft vibration on pumps, compressors, turbines, fans and gearboxes so that oil and gas, utility, cement and mining operators can trip machines in danger and plan maintenance. This page explains the sensor types used in the Kingdom, how desert heat and dust affect them, the standards and certificates that apply as of 2026, the makers that supply them, and what drives price and lead time.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified vibration sensors suppliers who quote for your order directly.
Tell us about vibration sensors in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Vibration sensors are transducers that turn machine motion into a signal for protection monitors, control systems and condition monitoring software. Part of the sensors and switches family for Saudi buyers, they are ordered by plant reliability teams, maintenance contractors, compressor and pump packagers, and EPC contractors in Jubail, Yanbu, Ras Tanura and Riyadh.
| Sensor type | Where it is used in the Kingdom | What to specify |
|---|---|---|
| Proximity probe, extension cable and driver | Shaft vibration and thrust position on gas and steam turbines, centrifugal compressors and large pumps | Probe size and range, total system length, case thread, API 670 compliance |
| Accelerometer | Bearing and gear condition on motors, pumps, gearboxes, kiln drives and mill fans | Sensitivity, frequency range, temperature limit, mounting and connector |
| Velocity transducer | Casing vibration on fans, blowers and general rotating equipment | Frequency response, sensitivity, output type |
| Loop-powered vibration transmitter | Overall vibration into DCS or PLC for alarms on pumps and fans | Velocity or acceleration, range, 4 to 20 mA scaling |
| Wireless vibration sensor | Remote pumps, wellsite and pipeline equipment, balance-of-plant machines | WirelessHART, ISA100 or LoRaWAN, update interval, battery, Ex marking |
| Vibration switch | Trip on cooling tower fans and small packaged equipment | Set point, time delay, reset method |
A shaft probe works on eddy currents like the proximity sensors used for object detection in Saudi Arabia, but it outputs a calibrated distance signal. Angle on mobile equipment is a different job, covered under tilt and inclination sensors, and speed measurement often uses shaft encoders or a keyphasor probe.
The largest users are oil, gas and petrochemical plants, followed by water, power, cement and mining operations with long runs of critical rotating equipment.
High casing temperatures and fine dust are the two main threats. Size the sensor to the hottest surface it will sit on in summer, and protect connectors and cable runs from dust and sun.
As of 2026, vibration sensors in Saudi Arabia follow ISO vibration standards and API 670 through owner specifications, SASO conformity via SABER where the HS code is regulated, and SASOEX for hazardous areas. References were checked in October 2026; confirm HS code status for each shipment on SABER.
| Requirement | Scope | Body |
|---|---|---|
| SABER product and shipment certificates | Regulated electrical products imported into the Kingdom, depending on HS code | SASO via approved certification bodies |
| SASOEX certificate | Vibration sensors and transmitters for explosive atmospheres, issued on IECEx or ATEX files | SASO |
| ISO 20816-3:2022 | Evaluation of vibration on industrial machinery above 15 kW, 120 to 30,000 r/min; listed in the GSO standards store | ISO, GSO |
| API Standard 670, 6th edition | Machinery protection systems for vibration, axial position, overspeed and temperature | API, via Aramco, SABIC and EPC specifications |
ISO 20816-3:2022 merged and replaced ISO 10816-3 and ISO 7919-3, and leaves out most pumps, reciprocating machines and large gas turbines, which other parts cover. API 670 was updated to its 6th edition in July 2025; it is a purchasing specification, so the vendor declares compliance rather than holding a certificate. For SASOEX, SASO asks IECEx applicants for the certificate of conformity, test report and quality assessment report. The SASO and SABER certificate guide explains clearance, and the Saudi oil, gas and petrochemicals page covers hazardous area practice.
Vibration sensors enter the Kingdom through authorised distributors, system integrators and the makers' Saudi offices, and on critical machines they usually come with the protection system.
Keep proximity probe, extension cable and driver from one maker and of matching total length, or the calibration no longer holds. Many machines also need load cells or temperature sensors on the same monitoring rack; plan the channels together.
Cost follows sensor type, temperature rating, Ex approval and wired versus wireless design; lead time follows Kingdom stock, system engineering and whether SABER or SASOEX paperwork already exists for the model.
The Gulf industrial sourcing guide lists supplier checks. To receive offers, send your vibration sensor requirement to Saudi suppliers.