Load cells in Saudi Arabia are the weighing sensors in truck scales, cement and grain silos, batching plants, process tanks and crane safety systems. This page sets out the load cell designs Saudi buyers specify, how heat, dust and corrosive plant air affect them, how to read OIML class markings, which SASO, SABER and SASOEX requirements apply as of 2026, and what sets cost and delivery time, with suppliers listed below.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified load cells suppliers who quote for your order directly.
Tell us about load cells in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Load cells are the force sensors that let a scale, silo or tank report weight: a strain gauged steel body flexes under load and sends a small signal to an indicator, weighing module or PLC. In Saudi Arabia they are part of the sensors and switches family for Saudi industry, and they are bought by cement, mining and fertiliser plants, food and feed mills, EPC contractors and scale service companies. For complete instruments, read the page on weighing scales and balances in Saudi Arabia; here the focus is the cell itself.
| Design | Saudi applications | Points to check |
|---|---|---|
| Double-ended shear beam | Truck scales at cement plants, quarries, ports and municipal waste sites; bulk tanks | Capacity per cell, centre loading, mount type |
| Canister (compression) | Very high capacity silos and older weighbridges | Check rods to restrain the structure, sealing |
| Rocker column | Truck scales where a self-centring column is preferred | Check rods and bumper bolts, upkeep cost |
| Single-ended shear beam and bending beam | Floor scales, process hoppers, small tanks | Mounting kit, overload stop, protection rating |
| S-type | Hanging hoppers, additive and pigment dosing, test rigs | Tension duty, rod ends, side load limits |
| Single point | Packing and checkweighing platforms in food and pharma plants | Platform size, eccentric load tolerance |
| Ring torsion and compression | Batching plants and low profile vessel weighing | Height, class, hygienic design where needed |
A Rice Lake guide gives a useful comparison: the double-ended shear beam is a compression cell fixed at both ends and loaded in the centre, it needs no check rods and is close to maintenance free, while canister cells, the oldest design, are now often bought to replace existing canisters. Hydraulic cells carry no strain gauges at all and send pressure through tubing to a summing system. Cells that digitise inside the housing give per-cell diagnostics but add electronics that vibration and moisture can damage, so weigh that trade-off for a mine or cement site.
On cranes and mobile equipment, load cells sit alongside inclination sensors for cranes and platforms and limit and position switches. Positioning of weigh hoppers and gates is often confirmed by inductive proximity sensors.
Saudi sites test load cells on three fronts: temperature well above the standard OIML band, abrasive dust that packs around mounts, and corrosive air near the Gulf coast and in chemical complexes. Each one changes the design you should buy.
Measurement Canada's guide to OIML markings notes that a temperature range only appears on a load cell when it differs from minus 10 to plus 40 degrees Celsius. Truck scale decks in Riyadh, Qassim or the Eastern Province can exceed the upper figure in summer, so ask the maker for the compensated range, the temperature effect on zero and span, and evidence for any extended range claimed.
Cement and quarry dust builds up between deck and foundation and can bridge the gap so the scale stops weighing correctly. Choose mounts that are easy to clean, keep check rods and bumper bolts in the inspection plan where the design has them, and seal junction boxes properly.
Rice Lake explains that alloy steels such as 4330 and 4340 dominate because of low creep and hysteresis, and that stainless cells earn their higher price in corrosive, wet service when the gauge cavity is hermetically sealed. That suits Jubail, Ras Tanura and Yanbu coastal plants and food lines with daily washdown. The humidity code on the OIML label (NH, CH or SH) shows which humidity test applied.
The OIML class code is a letter for accuracy class, A to D, then the maximum number of verification intervals in thousands: C3 is class C with 3,000 intervals and C6 is class C with 6,000. Choose the class from the scale's job, not from the cell catalogue.
HBM groups typical uses this way: D1 to C2 for simple building material scales for sand, cement or water, C3 for building material scales that dose additives and for machine construction checks, C3 to C6 for counter scales and filling machines, and C6 for dynamic checkweighers in food packaging. Siemens reports that most of its SIWAREX range meets C3. For legal weighing, ask the scale builder to show that the cells support the approved number of scale intervals.
As of 2026, Saudi load cell purchases involve the Gulf adoption of OIML R 60, the SASO measurement regime for instruments used in trade, SABER clearance where the HS code is regulated, and a SASOEX certificate for hazardous area use. We reviewed the sources in October 2026.
| Requirement | Scope | Issuer |
|---|---|---|
| GSO OIML R 60-1:2025, based on OIML R 60-1:2021 | Metrological and technical requirements for load cells | GCC Standardization Organization |
| Executive Regulation of the Measurement and Calibration Law, Appendix 2 | Technical requirements for non-automatic weighing instruments | SASO |
| Type approval certificate controls | Inspection and maintenance bodies for measuring devices and the type approval certificate | SASO |
| SASOEX certificate | Load cells and accessories for explosive atmospheres, on IECEx or ATEX documents | SASO |
| SABER certificates | Imported products whose HS code is regulated | SASO through approved bodies |
SASO's measurement centre publishes the regulation and its annex on non-automatic weighing instruments, so a truck scale or retail scale used for trade should be checked against them with SASO. For SASOEX, SASO asks for the IECEx certificate of conformity, test report and quality assessment report, or the ATEX certificate, declaration of conformity and quality assurance notification. The guide to SASO and SABER certificates explains shipment clearance, and scale checks rely on calibration equipment and test weights.
Load cells reach Saudi projects through authorised distributors of weighing brands in Riyadh, Jeddah and Dammam, through scale contractors who build and maintain truck scales, through OEMs of batching plants and overhead cranes, and through MRO stockists. Brands to consider:
Ask each supplier for the OIML marking and certificate of each cell, SABER status for the model, stock held in the Kingdom and the policy on replacement brands, since Rice Lake notes many cells are proprietary to one maker. Weighing modules usually report into PLC controllers in Saudi plants. The sourcing guide for the Gulf lists further checks, or send your load cell requirement to Saudi suppliers.
In Saudi Arabia the cost of a load cell follows its design, capacity, steel and sealing, class and certification, while delivery depends on local stock and on whether SABER and SASOEX paperwork already exists for the model.
Plants that depend on a single truck scale for dispatch should agree a spare cell holding with the supplier before the busy season.