Tank farm equipment in Saudi Arabia covers the vents, gauges, overfill systems, mixers, valves and foam fire protection fitted around storage tanks at Aramco sites, petrochemical complexes and fuel depots. Most is specified by the owner and bought through EPC or approved vendor routes. This page explains the groups, standards, local content and cost drivers.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified tank farm equipment suppliers who quote for your order directly.
Tell us about tank farm equipment in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Look at how Saudi tank farm projects are described and you see the shape. Aramco tendered an estimated 400 million dollar tank farm at Duba on the Red Sea coast in 2017, with scope covering storage tanks for oil products, loading and unloading facilities, pumps, modification works and associated facilities. In 2024 Gulf News reported that Sinopec won the Sabtank tank farm for the Amiral complex, for storage, export and import of biobutadiene and MTBE. In both, the tanks are only part of the package.
Around each tank, a Saudi owner expects the following. The parent page on storage tanks and terminals in Saudi Arabia shows how this equipment relates to the rest of the terminal.
| Group | Typical content | Where the buyer should be careful |
|---|---|---|
| Breathing and relief | Pressure and vacuum valves, emergency vents, flame arresters, blanketing | Capacity calculated from the real fill and empty rates and fire exposure |
| Measurement | Radar and servo gauges, temperature averaging, high level switches | Custody transfer approval and calibration support |
| Overfill protection | Independent alarms, shutdown logic, valve closure | Response time and functional safety evidence |
| Flow control | Manifold valves, double block and bleed, actuators, check valves | Fire safe rating, actuator speed, tightness proof |
| Mixing and heating | Side entry mixers, coils, heaters for heavy products | Nozzle loads and motor area classification |
| Fire and gas | Foam, cooling rings, detection, monitors | Authority approval, foam type, water supply |
For the tank itself see crude oil storage tanks and tank fabrication. For the vessel and vehicle connection see loading and unloading arms.
Choose the measurement and protection scheme before the hardware. The tank farm designer sets alarm levels, the independence of the high level shutdown from the control gauge, and the response time allowed to the operator. API Standard 2350, fifth edition, is the overfill prevention standard for storage tanks in petroleum facilities, and API says this edition puts more weight on how quickly operators respond to alarms and on management systems.
For gauges, a good data sheet shows the approvals and the accuracy. The Endress+Hauser Micropilot NMR81 lists OIML R85 and API 3.1B conformity for custody transfer, accuracy up to plus or minus 0.5 mm, range up to 70 m with 3 degree beam focus for nozzles near the tank wall, and IEC 61508 development up to SIL3 in a redundant arrangement. Use it as a pattern for what to demand from any supplier. Endress+Hauser lists tank gauging among its oil and gas solutions, and the wider choice of instruments is under radar level transmitters.
For isolation, General Valve (Cameron) makes Twin Seal double block and bleed plug valves, used where a verified seal is needed at tank farm or custody transfer points. Other valve types are on the pipeline valves page.
Gauges and actuators in full sun in Eastern Province summers run hot; electronics have temperature limits and may need sunshades or heat-rated options. Dust and sand clog vent screens and flame arrester elements and lie on foam equipment. Coastal humidity and salt at Yanbu, Jeddah, Jubail and Duba attack unprotected steel, aluminium and electronics.
These are engineering practice points rather than Saudi rules.
As of 2026, Saudi tank farms follow owner specifications that cite international standards. Imported regulated products may need SASO and SABER conformity, and Aramco scores local content under iktva.
| Requirement | Relevance | Note |
|---|---|---|
| API 2350, fifth edition | Overfill prevention | Frames alarms, independent protection and operator response |
| API 650 | Tank design, nozzles and openings | Defines where accessories connect |
| OIML R85 and API 3.1B | Tank gauging for custody transfer | Look for them on the gauge data sheet |
| Aramco and JV standards | Approved vendors, materials, inspection | Written into the purchase order |
| SASO and SABER | Conformity for regulated imports | See the SASO and SABER guide |
| iktva | Local content scoring | Aramco says its first 70 percent target was reached in early 2026 and the next is 75 percent by 2030 |
The SASO and SABER certificate guide explains the import side. Foam and detection equipment must also meet Saudi civil defence rules, and our page on fire fighting equipment covers that group.
Route depends on who is buying. On EPC projects, the contractor places orders from the owner's approved vendor list. For maintenance and small projects, buyers use manufacturers' Saudi offices, agents and stockists. Foam from Chemguard is an example of a branded fire protection range that the maker describes as including foam concentrates, systems, mobile equipment and specialty hardware, and the choice of foam and system is made with the authority.
Tank cleaning and bottom sludge removal are separate trades; see tank cleaning services.
Quotes arrive faster and compare better when the enquiry is complete. For each tank, list the product and its flash point, the maximum fill and empty rates, the design pressure and vacuum, the roof type, the nozzle schedule and the area classification. For the farm, add the bund layout, the foam and water supply, the power and instrument air available and the control system that will take the signals.
Then decide who owns each interface. Who supplies the gauge and who supplies the cable? Who tests the high level switch with the shutdown valve? Who proves the foam system by discharge test? Most disputes on a tank farm come from items that fall between scopes, such as a mixer motor that no one connected, or a vent with the right flange but the wrong capacity. Name an owner for every line on the tank datasheet and ask each supplier to confirm their scope in writing.
Finally, set aside budget for spares and for training. Operators on night shift need to know how to read the alarm panel and what to do when a gauge disagrees with a manual dip, and an instrument technician needs access to calibration tools and certificates. Equipment that is bought and then ignored loses its approvals in practice, even when the paper is fine.
To compare suppliers, post your requirement with the tank datasheet and area classification.