Pipeline valves in Saudi Arabia are the API 6D ball, gate, plug and check valves used to sectionalise, isolate and protect Aramco and utility pipelines, from Eastern Province gas gathering to cross-Kingdom crude and water lines. This page lists Saudi pipeline valve suppliers and covers valve types, sealing arrangements, sour and desert service, API 6D and ISO 14313, Aramco and local content points, and cost and delivery drivers.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified pipeline valves suppliers who quote for your order directly.
Tell us about pipeline valves in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Saudi pipelines use five main pipeline valve designs, all generally ordered to API Spec 6D: trunnion ball valves for most block and isolation duty, gate valves on liquid lines, plug valves where tight verified shut-off is needed, and check valves on pump and compressor discharge. They form one part of pipeline equipment and materials in Saudi Arabia.
| Design | Saudi applications | What the datasheet should state |
|---|---|---|
| Trunnion ball valve, full or reduced bore | Sectionalising valve stations on gas transmission and crude trunk lines, scraper trap isolation, GOSP and gas plant battery limits | Bore, ASME class, seat arrangement (DBB, DIB-1, DIB-2), welded or bolted body, operator, buried or above ground |
| Floating ball valve | Small bore drains, vents and kicker lines at stations | Size and class within the maker's floating ball range, seat type, fire test |
| Through-conduit gate valve | Crude and product lines, terminal manifolds at Ras Tanura, Juaymah and Yanbu | Slab or expanding gate, piggable bore, cavity relief, seat sealing |
| Double block and bleed plug valve | Product segregation at terminals and bulk plants, meter prover isolation | Verified shut-off with body bleed, seal compounds, actuator for frequent cycling |
| Check valve | Pump and compressor station discharge, downstream of metering | Swing, piston, axial or dual plate, response to surge, piggable or not |
Isolation valves must match the line pipe and WPHY fittings on Saudi pipelines in bore and wall, and buried valves rely on cathodic protection and a compatible body coating. Valves on wellheads and Christmas trees sit under API 6A wellhead valves, and plant service valves under industrial check valves and related categories.
Saudi buyers specify pipeline valves by duty, then sealing arrangement, then materials for the fluid and the site. In the Eastern Province the fluid often contains H2S; along desert routes, sand, heat and remote access shape the actuator and maintenance choices.
Valves for sour gas need body, trim and bolting materials within NACE MR0175/ISO 15156 limits, and the valve maker should show sour qualification for the same materials and welds. Elastomer seals on high pressure gas valves also need resistance to explosive decompression during rapid blowdown; ask for the qualification test behind that claim.
API 6D defines double block and bleed and double isolation and bleed arrangements differently, and Saudi isolation philosophies depend on which one is installed. Write the arrangement into the datasheet (DBB, DIB-1 or DIB-2), and specify the cavity relief method so that trapped pressure in the body cannot overpressurise a closed valve heated by the sun.
Sectionalising valves on long cross-country lines can be hundreds of kilometres from a maintenance base. Buyers often choose gas-over-oil or electric actuators with remote control and solar or line-gas power, sealed against dust. The valve actuators category for Saudi Arabia covers actuator options; specify enclosure ratings, operating temperature range and fail action.
Buried valves need stem extensions, sealant injection and vent lines to grade, and a coating compatible with the pipeline coating. Fully welded body valves remove flange leak paths underground but cannot be opened for repair, so the seat design has to suit the full design life.
Saudi pipeline valves are ordered to API 6D or ISO 14313 plus owner specifications; for Aramco projects the valve maker and the specific product range must be approved by Aramco, and local content is scored through IKTVA. We checked these points in October 2026.
| Item | What it governs | Organisation |
|---|---|---|
| API Spec 6D, 25th edition | Pipeline valve design, manufacture, testing and documentation | American Petroleum Institute |
| ISO 14313:2025 | Supplement to API 6D 25th edition for axial, ball, check, gate and plug valves, Class 150 to 2500 | ISO |
| NACE MR0175/ISO 15156 | Materials in H2S service | AMPP and ISO |
| Aramco supplier registration and product approval | Valves supplied to Aramco facilities and contractors | Saudi Aramco |
| IKTVA | Local value scoring of Aramco suppliers | Saudi Aramco |
| SABER PCoC and SCoC, where a SASO regulation applies | Imported products under SASO technical regulations | SASO |
ISO published the 2025 edition of ISO 14313 in June 2025 as a supplement to API 6D, replacing the standalone 2007 edition. If a Saudi specification still quotes ISO 14313:2007, ask the owner which edition governs. On local content, MEED reported in February 2026 that Aramco's IKTVA programme reached 70% and now targets 75% by 2030, so in-Kingdom valve assembly, testing and repair can affect bid evaluation. Whether an imported valve needs SABER certificates depends on its tariff code; our SASO and SABER certificates guide explains how to check, and the GCC valve selection guide covers classes, seats and trims.
Saudi buyers source pipeline valves from makers with in-Kingdom assembly and service centres, from authorised agents of overseas makers, and from stockists for small sizes. For Aramco orders, the decisive question is whether the maker is approved for that valve type, size and class.
Brands on ListGCC that make pipeline valves include the SLB valve family: Cameron Grove trunnion ball valves, General Valve Twin Seal plug valves and the wider Cameron (SLB) range. Others are SVS for API 6D ball and dual-plate check valves, Flowserve and Velan for steel ball, gate and check valves, and TechnipFMC for gate valves in wellhead and flowline service.
Ask bidders to confirm API 6D licensing, Aramco approval status, in-Kingdom test and repair facilities, and actuator integration responsibility. To reach several suppliers with your datasheets, post your requirement for pipeline valves.
Cost is driven by bore, class, materials and actuation; delivery by forging supply, sour qualification, witnessed testing and Aramco document approval.