Silicone sealants in Saudi Arabia are the flexible joint sealants used on glazing, curtain walls, stone and metal cladding and wet areas in Riyadh, Jeddah and Eastern Province projects. This page lists Saudi silicone sealant suppliers and covers neutral and acetoxy cure, ASTM C920 and EN 15651 classes, structural glazing, how SASO certification is handled, desert heat and dust, and price drivers.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified silicone sealants suppliers who quote for your order directly.
Tell us about silicone sealants in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Saudi projects buy silicone sealants mainly for weatherproofing glazing and cladding joints, bonding glass in structural glazing, sealing natural stone, and sealing bathrooms and kitchens. They sit within the range of sealants and adhesives sold in Saudi Arabia, and on most towers, hospitals and hotels the facade or fit-out subcontractor buys them against a consultant-approved product.
| Type | Where Saudi buyers use it | What to specify |
|---|---|---|
| Neutral cure weatherproofing silicone | Window and curtain wall perimeters, aluminium composite and metal panel joints | ASTM C920 classification or EN 15651-1, movement class, primer, colour |
| Structural silicone | Unitised curtain walls on Riyadh and Jeddah towers | ASTM C1184, approval inside the glazing system, project adhesion and compatibility tests |
| Stone-safe silicone | Granite and marble facades, mosque and palace stonework | Stain test to ASTM C1248 on the specified stone |
| Sanitary silicone | Hospital, hotel, housing and mosque ablution areas | Mould resistance, EN 15651-3 |
| Acetoxy silicone | Glass and ceramic joints indoors | Not for sensitive metals, stone or concrete |
Use other chemistries where silicone does not fit: polyurethane sealants for floor and car park joints that take traffic, and construction adhesives for tiles, boards and anchors where the job is bonding rather than sealing. Every joint also needs the right joint filler or backer rod. For stone facades, coordinate the sealant with your stone cladding supplier.
Neutral cure silicone is the default for Saudi facades, metals, stone and concrete; acetoxy silicone is acceptable only on non-sensitive surfaces such as glass and glazed ceramic. As Soudal puts it, acetoxy silicones release acetic acid during cure, with a strong vinegar smell, and are not generally suitable for sensitive materials, while neutral grades have no acidic by-product. The trade-off is speed, since acetoxy cures faster.
Silicone is chosen for Saudi facades because it tolerates sun and heat, but high surface temperatures inland, wind-blown dust and big daily temperature swings still cause joint failures when application and design are poor.
Sika's guidance for its one part sealants limits application to 5 to 40 °C and notes that heat and humidity shorten skin time. In Riyadh or Qassim in summer, metal and dark stone in the sun run hotter than that, so work in shade or early morning and store cartridges indoors.
Sand and fine dust on aluminium, glass and stone are the usual cause of adhesion loss. Clean with the solvent and method in the manufacturer's instructions, prime where required, and run the ASTM C1193 field adhesion test on early joints. Dow's guide specification uses this test before production sealing.
Dow's guide specification states that silicone construction sealants resist UV and temperature extremes and typically last longer than organic sealants in the same joint, which suits exposed glazing in Jeddah and the Eastern Province.
Desert days and nights work facade joints hard. Choose a class that matches the calculated movement, and keep the width to depth ratio and backer rod as the data sheet shows.
In Saudi Arabia, the performance of silicone sealants comes from ASTM or EN standards written into the project specification, while market access depends on how SASO classes the product. As of 2026 we did not find a SASO technical regulation written specifically for construction joint sealants, so confirm the conformity route with a SASO notified body.
| Requirement | Applies to | Authority |
|---|---|---|
| ASTM C920 (type, grade, class 100/50 to 12.5, use) | Elastomeric joint sealants | ASTM, via project specifications |
| EN 15651 parts 1 to 4 | Facade, glazing, sanitary and walkway sealants | CEN, via project specifications |
| ASTM C1184 | Structural silicone glazing sealants | ASTM, with the facade engineer |
| ASTM C1193 and ASTM C1248 | Field adhesion and stain testing | ASTM, via project specifications |
| SASO conformity route and SABER shipment certificate | Products under SASO technical regulations | SASO and notified bodies |
EN 15651 is split by use: Part 1 for exterior facade joints, Part 2 for glazing, Part 3 for sanitary joints, Part 4 for pedestrian walkways and Part 5 for marking and assessment. ASTM C920 classifies sealants by type, grade, class and use and states that not all compliant sealants suit every substrate, so name all four on Saudi schedules. Our explainer on SASO and SABER certificates covers product and shipment certificates.
Silicone sealants in Saudi Arabia are supplied by manufacturers' local offices and agents, facade sealant distributors working with glazing contractors, and building materials traders in Riyadh, Jeddah and Dammam.
Structural and facade silicones are carried under DOWSIL, Momentive, Wacker and Tremco. Sika, Mapei and Bostik make silicones within wider construction ranges, and Soudal, Den Braven and Henkel supply general purpose and sanitary grades.
Ask each bidder:
See our guide on checking supplier credentials in Saudi Arabia for commercial registration and agency checks.
Higher grades and project testing raise both price and lead time in Saudi Arabia, while general silicones are stocked by traders in every major city.
For comparable quotes, post your requirement with grade, colour, quantity and delivery city.